Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
∙ General information:
Immediately remove any clothing soiled by the product.
Take affected persons out into the fresh air.
Personal protection for the First Aider.
Do not leave affected persons unattended.
∙ After inhalation:
Keep quiet
Remove to fresh air, rest, medical control in case of important inhalation or respiratory disorders. (delayed
effects possible!)
∙ After skin contact:
Immediately remove any clothing soiled by the product.
Wash skin thoroughly with soap and water for 15 minutes, medical control if persistent irritation or burning.
∙ After eye contact:
Rinse opened eye for several minutes under running water. Then consult a doctor.
Protect unharmed eye.
∙ After swallowing: Call for a doctor immediately.

Most important symptoms and effects, both acute and delayed
Possible delayed lung oedema
Irritation et corrosion

Indication of any immediate medical attention and special treatment needed
No further relevant information available.
SECTION

Fire-fighting measures

Extinguishing media
∙ Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
∙ For safety reasons unsuitable extinguishing agents:
Water with full jet

Special hazards arising from the substance or mixture
During heating or in case of fire poisonous gases are produced.
In case of fire, the following can be released:
Nitrogen oxides (NOx)
Carbon monoxide (CO)
Sulphur dioxide (SO2)

Advice for firefighters
∙ Protective equipment:
Wear self-contained respiratory protective device.
Do not inhale explosion gases or combustion gases.
Wear protective suit
Mouth respiratory protective device.
∙ Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
Collect contaminated fire fighting water separately. It must not enter the sewage system.
Cool exposed containers to the heat by pulverizing water.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Avoid substance contact.
Mount respiratory protective device.
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Ensure supply of fresh air in enclosed rooms.

Environmental precautions:
Do not allow product to reach sewage system or any water course.
Do not allow to enter sewers/ surface or ground water.
Inform respective authorities in case of seepage into water course or sewage system.

Methods and material for containment and cleaning up:
Dyke up, pump or absorb liquid components with an inert liquid-binding material.
Ensure adequate ventilation.
Do not use sawdust
Dispose of the material collected according to regulations.
Dispose contaminated material as waste according to item 13.

Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.

Handling and storage

Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Open and handle receptacle with care.
Prevent formation of aerosols.
∙ Information about fire - and explosion protection:
Keep ignition sources away - Do not smoke.
Keep respiratory protective device available.
Emergency cooling must be available in case of nearby fire.

Conditions for safe storage, including any incompatibilities
∙ Storage:
∙ Requirements to be met by storerooms and receptacles:
Do not use light alloy receptacles.
Unsuitable material for receptacle: aluminium.
∙ Information about storage in one common storage facility: Store away from foodstuffs.
∙ Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well sealed receptacles.

Specific end use(s) No further relevant information available.

Transport information

Land transport (ADR/RID)

UN number:
UN2735
Proper shipping name and description:
2735 AMINES LIQUIDES CORROSIVES, N.S.A. (1H- Pyrazol-3- amine, N- (2- thienylmethyl) -)
Class:
8 Corrosive substances.
Packaging group:
II
Labels:
8
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
UN2735
Proper shipping name and description:
AMINES, LIQUID, CORROSIVE, N.O.S. (1H- Pyrazol- 3-amine, N- (2- thienylmethyl) -)
Class:
8 Corrosive substances.
Packaging group:
II
Labels:
8
Remarksopen allclose all

Marine transport (IMDG)

UN number:
UN2735
Proper shipping name and description:
AMINES, LIQUID, CORROSIVE, N.O.S. (1H- Pyrazol- 3-amine, N- (2- thienylmethyl) -)
Class:
8 Corrosive substances.
Packaging group:
II
EmS code:
F-A,S-B
Labels:
8
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
UN2735
Proper shipping name and description:
AMINES, LIQUID, CORROSIVE, N.O.S. (1H- Pyrazol- 3-amine, N- (2- thienylmethyl) -)
Class:
8 Corrosive substances.
Packaging group:
II
Labels:
8
Remarksopen allclose all

Additional transport information

Additional transport information
∙ ADR
∙ Limited quantities (LQ) 1L
∙ Transport category 2
∙ Tunnel restriction code E
∙ UN "Model Regulation": UN 2735 AMINES, LIQUID, CORROSIVE, N.O.S. (1HPYRAZOL-
3- AMINE, N- (2- THIENYLMETHYL) -), 8, II

Exposure controls / personal protection

Additional information about design of technical facilities: No further data; see item 7.

Control parameters
∙ Ingredients with limit values that require monitoring at the workplace: Not required.
∙ Additional information: The lists valid during the making were used as basis.

Exposure controls
∙ Personal protective equipment:
∙ General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.
Avoid contact with the eyes and skin.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Keep away from foodstuffs, beverages and feed.
∙ Respiratory protection:
Where risk assessment shows air-purifying respirators are appropriate use a mask filter with multi-purpose
combination (US) or type ABEK according standard EN 14387) respirator cartridges
∙ Protection of hands:
Protective gloves
The protective gloves to be used must comply with specifications of CE directive 89/686/EEC and he resultant
standard EN 374.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
chemical mixture.
∙ Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer.
∙ Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
∙ Eye protection:
Tightly sealed goggles
Face protection
∙ Body protection:
Boots
Apron

Stability and reactivity

∙ 10.1 Reactivity No further relevant information available.
∙ 10.2 Chemical stability
∙ Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
∙ 10.3 Possibility of hazardous reactions Reacts with strong acids and oxidising agents.
∙ 10.4 Conditions to avoid No further relevant information available.
∙ 10.5 Incompatible materials: No further relevant information available.
∙ 10.6 Hazardous decomposition products: No dangerous decomposition products known

Disposal considerations

Waste treatment methods
∙ Recommendation
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Hand over to hazardous waste disposers.
Must be specially treated adhering to official regulations.
∙ Uncleaned packaging:
∙ Recommendation: Disposal must be made according to official regulations.