Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

General advice:       Take off all contaminated clothing immediately.

If inhaled:       Move the victim to fresh air.

If not breathing, give artificial respiration.

If breathing is difficult, give oxygen.

Consult a physician.

In case of skin contact:       In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.

Wash contaminated clothing before reuse.

Get medical advice/ attention.

In case of eye contact:       Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.

Get medical attention.

If swallowed:       Never give anything by mouth to an unconscious person.

Rinse mouth with water.

Do NOT induce vomiting.

Consult a physician.

Symptoms       : No symptoms known currently.

Risks       : No hazards known at this time.

Treatment     : Treat symptomatically.

Fire-fighting measures

Suitable extinguishing media:       Water spray

                    Alcohol-resistant foam

                    Dry chemical

                    Carbon dioxide (CO2)

Unsuitable extinguishing media:       High volume water jet

Specific hazards during firefighting:       In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO)

                    Carbon dioxide (CO2)

                    Nitrogen oxides (NOx)

Special protective equipment for firefighters:       Self-contained breathing apparatus

Further information:       Evacuate personnel to safe areas.

             Wear suitable protective equipment.

             Do not disperse powdered product in air.

Accidental release measures

Personal precautions:

Use personal protective equipment.

Avoid dust formation.

Ensure adequate ventilation.

Evacuate personnel to safe areas.

Avoid breathing dust.

Environmental precautions:       The product should not be allowed to enter drains, water courses or the soil.

                    Do not allow material to contaminate ground water system.

Methods for cleaning up:       Sweep up or vacuum up spillage and collect in suitable container for disposal.

             Avoid dust formation.

             Ventilate the area.

             Clean contaminated surface thoroughly.

             Treat recovered material as described in the section "Disposal considerations".

Handling and storage

Advice on safe handling:       Handle and open container with care.

Provide appropriate exhaust ventilation at places where dust is formed.

Avoid dust formation.

Advice on protection against fire and explosion:       Observe the general rules of industrial fire protection Dust can form an explosive mixture in air. Keep away sources of ignition. Take measures to prevent the build up of electrostatic charge.

Hygiene measures:       Wash hands before breaks and at the end of workday. Use protective skin cream before handling the product. Take off immediately all contaminated clothing.

Requirements for storage areas and containers:       Keep only in the original container. Keep container tightly closed.

Further information on storage conditions:       Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away sources of ignition.

Advice on common storage:       No conditions to be specially mentioned.

Other data:       no data available

Specific use(s):       No further recommendations.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
not restricted
Shippingopen allclose all
not restricted
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
not restricted
Shippingopen allclose all
not restricted
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
not restricted
Shipping information
Proper shipping name and description:
not restricted
Chemical name:
not restricted
not restricted
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
not restricted
Shipping information
Proper shipping name and description:
not restricted
Chemical name:
not restricted
not restricted
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
No transport as bulk according IBC - Code.

Exposure controls / personal protection

Control parameters no data available

Exposure controls

Engineering measures:

Provide appropriate exhaust ventilation at machinery and at places where dust can be generated.

Personal protective equipment

Eye protection:       Safety glasses with side-shields conforming to EN166

Hand protectionRemarks       :Protective gloves Gloves must be inspected prior to use. Wash thoroughly after handling.

Skin and body protection:       Impervious clothing

             Long sleeved clothing

Choose body protection according to the amount and concentration of the dangerous substance at the work place.

Respiratory protection       :       Wear respiratory protection.

                    P1 filter

Protective measures:       Handle in accordance with good industrial hygiene and safety practice.

Stability and reactivity

10.1 Reactivity

See section 10.3. "Possibility of hazardous reactions"

10.2 Chemical stability

Stable under normal conditions.

10.3 Possibility of hazardous reactions

Hazardous reactions:       No dangerous reaction known under conditions of normal use.

10.4 Conditions to avoid

Conditions to avoid:       Avoid dust formation.

10.5 Incompatible materials

Materials to avoid:       Strong oxidizing agents

             Strong acids

             Strong bases

10.6 Hazardous decomposition products

Carbon oxides

Nitrogen oxides (NOx)

Sulphur oxides

Hydrogen chloride gas

Disposal considerations

Product       :       Product should be taken to a suitable and authorized waste disposal site in accordance with relevant regulations and if necessary after consultation with the waste disposal operator and/or the competent Authorities

Contaminated packaging       :       Packaging that cannot be cleaned should be disposed of as product waste