Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 429-080-9 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: Move to area of fresh air. If person is not breathing, give artifical respiration. If breathing is difficult,
administer oxygen.
If there are signs of discomfort, seek medical advice. Show copy of SDS or label to medical staff.
Emergency measure - Eyes: Hold eyelids apart and rinse immediately with plenty of water for at least 15 minutes. Seek medical attention if
signs of discomfort.
Emergency measure - Skin: Wash with water and mild soap or detergent. If signs of discomfort, seek medical attention. Remove contaminated
clothing and wash thoroughly before re-use.
Emergency measure - Ingestion: If significant ingestion, vomiting may be induced by trained personnel if the person is conscious and not experiencing
convulsions.
If ingested, seek medical advice immediately Show copy of SDS or label to medical staff. Testing suggests that there may be a delay of an hour or more before any toxic effects
Fire-fighting measures
Recommended extinguishing agent: Dry foam, powder, water spray, carbon dioxide and other extinguishing agents. No adverse reaction with normal
extinguishing agents is known. Evaluate the nature of the incident before using water. Use appropriate medium for the underlying cause of fire and surrounding environment.
Product arising from burning: Complete combustion will lead to the formation of carbon dioxide, nitrogen oxides and water. Incomplete combustion (eg in enclosed spaces) will result in volatile organic derivatives, nitrous oxides and carbon monoxide. Product determined by test: N
Protective equipment: Full protective equipment is recommended including self contained breathing apparatus, chemical and flame resistant protective clothing, gloves, goggles, face protection and boots.
Accidental release measures
Emergency measures in case of spillage: Minimise dust formation by collecting spilled material using a wet mop, damp sponge or wet/dry HEPA vacuum. Place into suitably labelled containers and dispose of for reclaimation or disposal in accordance with local regulations. Residues and minor spills should be contained and transferred to suitably labelled containers for approved disposal.
Protective clothing should be worn including suitable eye protection, respirator, gloves and coveralls.
Handling and storage
Handling: Environmental controls such as local exhaust ventilation must be in place to minimise dust levels. In addition, employees should use the necessary personal protective equipment (PPE) to reduce their risk of exposure, such as respiratory protection to EN 136, coveralls (or full air suits conforming to EN368), latex or other impermeable gloves conforming to EN374 and safety glasses. Rubber, neoprene or other gloves may be required if solvents, corrosives or other chemicals are present. Equipment should be bonded and earthed to control static charges when handling the powder. Powder handling equipment such as dust collectors, dryers and mills may require additional protection, such as explosion venting. Storage: Store in UN approved fibre drums. Ensure the containers are stored upright, sealed, bunded and suitably labelled in a cool well ventilated place. Keep away from incompatible substances such as acids, oxiding agents and ketones. Packaging of the substance and or preparation: The substance is packed in UN approved polyethylene lined fibre containers.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- not listed
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- not listed
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- not listed
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- Not classified
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Environmental controls such as local exhaust ventilation must be in place to minimise dust levels. In addition, employees should use the necessary personal protective equipment (PPE) to reduce their risk of exposure, such as respiratory protection to EN 136, coveralls (or full air suits conforming to EN368), latex or other impermeable gloves conforming to EN374 and safety glasses. Rubber, neoprene or other gloves may be required if solvents, corrosives or other chemicals are present
Stability and reactivity
Danger other than fire: Avoid contact with strong oxidising and reducing agents.
Chemical reaction with water: The substance appears to hydrolyse slowly in water at high
temperatures, but this is not thought to result in the formation of hazardous products. There is no violent reaction with water.
Dust explosion: Material Exhibits strong explosion characteristics if ignited as a dust cloud. The substance is also very
susceptible to accumulating static charges during handling, and uncontrolled static discharge may provide a source of ignition under certain conditions, due to low minimum ignition energy. Provide suitable bonding and grounding for containers and process equipment to control static charges. Powder handling equipment such as dust collectors, dryers and mills may require additional protective measures.
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of recovery/recycling: The substance is consumed during use and there is no opportunity for recovery or recycling. Industry - Possibility of neutralisation: Hydrolysing the substance will destroy it. No known method of neutralisation is known.
Industry - Possibility of destruction: controlled discharge: Trace quantities are destroyed by biological oxidation in waste water treatment plants.
Industry - Possibility of destruction - incineration: This is recommended for large quantities and solvent wastes. Closed system incinerators with scrubbers should be used in compliance with local and national legislation.
Industry - Possibility of destruction - water purification: Trace quantities in water can be treated in secondary biological WWTP before discharge to municipal treatment works. Industry - Possibility of destruction - other: No other recommended methods of disposal.
Public at large - Possibility of recovery/recycling: Not applicable to the general public.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
