Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

Description of key information

In Vitro study

The test item, Reactive Orange 5, was assayed for the in vitro skin irritation in human epidermal model EpiDermTM.The test was performed according to the OECD Test Guideline No.439: In VitroSkin Irritation: Reconstructed Human Epidermis Test Method (2015),and Protocol for: In Vitro EpiDerm TM Skin Irritation Test For use with MatTek Corporation’s Reconstructed Human Epidermal Model EPI-200-SIT (2014).

One In vitro study is available.

GLP study.

Klimish score 1.

Three studies Eye Irritation are available:

In Vivo study

The test was performed according to the OECD Test Guideline No. 405 Acute Eye Irritation/Corrosion. Adopted October 2, 2012.

GLP study.

Klimish score 1.

The test substance, Reactive Orange 5, was tested for the evaluation the potential ocular corrosivity or severe irritancy as measured by its ability to induce opacity and increased permeability in an isolated bovine cornea.

The test was performed according to the OECD Test Guideline No. 437, Bovine Corneal Opacity and Permeability Test Method for Identifying i) Chemicals Inducing Serious Eye Damage and ii) Chemicals Not Requiring Classification for Eye Irritation or Serious Eye Damage, Adopted 26th July 2013

The test substance, Reactive Orange 5, was assayed for the in vitro eye irritation in human epidermal model EpiOcularTM.The test was performed according to the OECD Test Guideline No.492: Reconstructed human Cornea-like Epithelium (RhCE) test method for identifying chemicals not requiring classification and labelling for eye irritation or serious eye damage.

Two In vitro study are available.

GLP study.

Klimish score 1.

Key value for chemical safety assessment

Skin irritation / corrosion

Link to relevant study records
Reference
Endpoint:
skin irritation: in vitro / ex vivo
Type of information:
experimental study
Adequacy of study:
key study
Study period:
19.04-29.04.2016
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to guideline
Guideline:
OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)
Deviations:
yes
Remarks:
Colour interference test was performed with frozen instead live tissues. As the test substance acts the same way as in MTT test (both post-incubatition media were coloured, the test substance remained in tissues and on walls of inserts after extraction)
GLP compliance:
yes (incl. QA statement)
Test system:
human skin model
Source species:
human
Cell type:
other: normal human-derived epidermal keratinocytes
Cell source:
skin obtained from plastic surgery from multiple donors
Details on test system:
RECONSTRUCTED HUMAN EPIDERMIS (RHE) TISSUE- Model used: model EpiDermTM- Tissue: The reconstructed human epidermal model EpiDerm™ (EPI-200 ver. 2.0, MatTek, Bratislava, Slovakia); Lot No. 23329)- Date of initiation of testing: 19.04.2016TEMPERATURE USED FOR TEST SYSTEM- Temperature used during treatment / exposure: 37±1°C
Control samples:
yes, concurrent negative control
yes, concurrent positive control
Amount/concentration applied:
TEST MATERIAL- Amount(s) applied: 25 gNEGATIVE CONTROLPBS (phosphate buffered saline) prepared 25/02/2016, exp. 25/08/2016 and prepared 23/03/2016 exp. 23/09/2016- Amount(s) applied: 25 µLPOSITIVE CONTROL5 % SDS (sodium dodecyl sulphate), MatTek, Lot No. 012616TMB, exp. 26/01/2017
Duration of treatment / exposure:
60 min.
Duration of post-treatment incubation (if applicable):
42 hours
Number of replicates:
3
Irritation / corrosion parameter:
% tissue viability
Value:
85.6
Negative controls validity:
valid
Positive controls validity:
valid
Interpretation of results:
GHS criteria not met
Conclusions:
Under the above-described experimental design, average viability of tissues treated by the test substance Reactive Orange 5 was 85.6 % of negative control average value, i.e. viability was > 50 %. The effect of the test substance was negative in EpiDermTM model (tissues were not damaged).
Executive summary:

The test item, Reactive Orange 5, was assayed for thein vitro skin irritation in human epidermal model EpiDermTM.The test was performed according to the OECD Test Guideline No.439: In VitroSkin Irritation: Reconstructed Human Epidermis Test Method (2015),and Protocol for: In Vitro EpiDermTMSkin Irritation Test For use with MatTek Corporation’s Reconstructed Human Epidermal Model EPI-200-SIT (2014).

After pre-incubation of tissues, 25 mg of the test substancewasplaced directly atop to the previously moistened tissue and it was spread on the entire tissue surface. Length of exposit ion was 60 minutes. Three tissues were used for the test substance and every control.

After removal of the test substance, tissues were post-incubated for approximately
42 hours due to leave of damage reparation. Three hours incubation with MTT and two hours extraction period with shaking followed then. Optical density (OD570) of isopropyl alcohol extracts was measured on a spectrophotometer. Relative cell viability was calculated for each tissue as % of the mean viability of the negative control tissues.

The test substance was found to be not direct reducing, so none correction of results for this property must have been done. As the test substace is coloured (orange), steps for determination of appropriate contribution of absorbace to viability of tissues were done. It was found, that no measurable colour passed to final extract.

Average viability of treated tissues was 85.6 %, i.e.viability was >50 %.

The effect of the test substance was negative in EpiDermTMmodel (tissues were not damaged).

According to the classification criteria given in chapter 3.8., the test substance is considered to have no category in regard to skin irritation.

Endpoint conclusion
Endpoint conclusion:
no adverse effect observed (not irritating)

Eye irritation

Link to relevant study records

Referenceopen allclose all

Endpoint:
eye irritation: in vitro / ex vivo
Type of information:
experimental study
Adequacy of study:
key study
Study period:
20-21.04.2016
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to guideline
Guideline:
OECD Guideline 437 (Bovine Corneal Opacity and Permeability Test Method for Identifying i) Chemicals Inducing Serious Eye Damage and ii) Chemicals Not Requiring Classification for Eye Irritation or Serious Eye Damage)
Deviations:
no
GLP compliance:
yes (incl. QA statement)
Details on test animals or tissues and environmental conditions:
TEST MATERIAL: Bovine eyes- Source: Breeding service CHOVSERVIS a.s., division TORO® Hlavečník, Hradec Králové, Czech RepublicEyes were collected by slaughterhouse employees. The eyes were enucleated as soon as possible after death. Only healthy animals (12 to 60 months old) considered suitable for entry into the human food chain were used as a source of corneas for use in the BCOP test. The risk of contamination was minimized (e.g., by keeping the container containing the eyes on ice, by adding antibiotics to the HBSS used to store the eyes during transport (e.g., penicillin at 100 IU/mL and streptomycin at 100 μg/mL).
Vehicle:
physiological saline
Controls:
yes, concurrent positive control
yes, concurrent negative control
Amount / concentration applied:
TEST MATERIAL- Amount(s) applied: 750 µl of suspension- The test substance was tested as suspension prepared from test substance at 20% concentration in a 0.9% sodium chloride solution. 2g of the test substance was suspended in 10 mL of 0.9% sodium chloride solution. Positive control substance: Name: ImidazoleLot no: WXBC1234VExpiration: 01/2024Supplier: Sigma-AldrichNegative control substance: Name: 0.9% NaClLot: 15IM422A1 Expiration: 11/2018Supplier: B. Braun Melsungen AG, Germany
Duration of treatment / exposure:
4h
Duration of post- treatment incubation (in vitro):
1,5 h
Number of animals or in vitro replicates:
Exposed group (test substance) - 3 corneas (No. 9, 10, 12) Positive control group (20% Imidazole) – 3 corneas (No. 13, 14, 15) Negative control group (0.9% NaCl) – 3 corneas (No. 6, 8, 11)
Details on study design:
TEST PROCEDURE- Selection of corneas, mounting in holders- incubation with EMEM 1 hour (32 ± 1°C)- removed EMEM, measurement of baseline opacity- treatment by positive and negative control substances and test substance (incubation 4 hour)- washing epithelium, measurement of opacity after application -application of sodium fluorescein (5 mg/ml), incubation 1.5 hour (32 ± 1°C) - measurement of absorbance (490 nm).Endpoints measured:Opacity: the amount of light transmission through the cornea. Corneal opacity was measured quantitatively with the aid of an opacitometer (Opacitometer, MC2 - Le spécialiste du laboratoire – France) resulting in opacity values measured on a continuous scale. Permeability: the amount of sodium fluorescein dye that penetrates all corneal cell layers (i.e., the epithelium on the outer cornea surface through the endothelium on the inner cornea surface) measured indirectly using visible light spectrophotometry. 1 mL sodium fluorescein solution (5 mg/mL) was added to the anterior chamber of the corneal holder, which interfaced with the epithelial side of the cornea, while the posterior chamber, which interfaced with the endothelial side of the cornea, is filled with fresh EMEM. The holder was incubated in horizontal position for 1.5 hours at 32 ± 1 ºC. The amount of sodium fluorescein that crosses into the posterior chamber was quantitatively measured with the aid of UV/VIS spectrophotometry (Spectrophotometer GENESYSTM 10 UV/VIS Scanning). The values of absorbance measured at 490 nm were recorded as optical density (OD490) values.EVALUATION OF RESULTSMean opacity:Opacity values of treated corneas were corrected by subtracting individual background opacity values and the mean opacity is calculated.Mean permeability:Mean OD value of treated corneas was corrected by subtracting the mean OD value of negative control and the mean opacity is calculated. IVIS calculation:Resulting mean opacity and OD490 values for each treatment group was combined in an empirically-derived formula to calculate an in vitro irritancy score (IVIS) for each treatment group as follows:IVIS = mean opacity value + (15 x mean permeability OD490 value)
Irritation parameter:
in vitro irritation score
Value:
28.17
Negative controls validity:
valid
Positive controls validity:
valid
Interpretation of results:
other: no predicton can be made
Conclusions:
The In Vitro Irritancy Score (IVIS) for Reactive Orange 5 was 28.17 but this result could be affected by higher opacity values (colouring of corneas after removing the test substance). On the basis of score (IVIS) given above the classification according to the criteria of the UN GHS could not be performed.No prediction can be made on test substance potential to cause eye irritation or serious eye damage.
Executive summary:

The test substance,Reactive Orange 5,was tested for the evaluation the potential ocular corrosivity or severe irritancy as measured by its ability to induce opacity and increased permeability in an isolated bovine cornea.

The test was performed according to the OECD Test Guideline No. 437, Bovine Corneal Opacity and Permeability Test Method for Identifying i) Chemicals Inducing Serious Eye Damage and ii) Chemicals Not Requiring Classification for Eye Irritation or Serious Eye Damage, Adopted 26thJuly 2013

 

The test was performed using nine isolated bovine corneas. The testing was performed on three groups of corneas: test substance treatment group, positive control group and negative control group. Three corneas per group were used.

Closed-chamber method was used, because the test substance was applicable by micropipette. The opacity and permeability of each cornea were measured.The In Vitro Irritancy Score (IVIS) was calculated from the values of opacity and permeability.

 

The In Vitro Irritancy Score (IVIS) for Reactive Orange 5was 28.17 but this result could be affected by higher opacity values (colouring of corneas after removing the test substance).

On the basis of score (IVIS) given above the classification according to the criteria of the UN GHS could not be performed.

No prediction can be made on test substance potential to cause eye irritation or serious eye damage.

 

Endpoint:
eye irritation: in vitro / ex vivo
Type of information:
experimental study
Adequacy of study:
key study
Study period:
1.11.-3.12.2016
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to guideline
Guideline:
OECD Guideline 492 (Reconstructed Human Cornea-like Epithelium (RhCE) Test Method for Identifying Chemicals Not Requiring Classification and Labelling for Eye Irritation or Serious Eye Damage)
Deviations:
no
GLP compliance:
yes (incl. QA statement)
Details on test animals or tissues and environmental conditions:
The reconstructed human cornea-like epithelial model EpiOcular™ (OCL-200 ver. 2.0) comes from MatTek, Bratislava, SK. The RhCE tissues are reconstructed from primary human cells, which have been cultured for several days to form a stratified, highly differentiated squamous epithelium, morphologically similar to that found in the human cornea. The EpiOcular™ RhCE tissue construct consists of at least 3 viable layers of cells and a non-keratinized surface, showing a cornea-like structure analogous to that found in vivo.
Vehicle:
physiological saline
Controls:
yes, concurrent positive control
yes, concurrent negative control
Amount / concentration applied:
The test substance (50 mg of substance/surface ratio 39.7 mg/cm2) is placed directly atop to the tissue moistened with 20 µL of PBS.
Duration of treatment / exposure:
6h
Duration of post- treatment incubation (in vitro):
after removal:post-soaked-25 min.post-incubation-18 hours
Number of animals or in vitro replicates:
two replicate tissues
Details on study design:
Temperature: 37±1°C2 tissues for the test substance2 tissues for every control2 tissues as colorant controlTest ProcedureOn the day of receipt, EpiOcularTM tissues are conditioned to release transport stress related compounds and debris by incubation in assay medium delivered by MatTek for test performance for 1 hour at standard culture conditions and, after media replacement, overnight (following 16-24 hours) also standard at culture conditions. After pre-incubations, tissues are wetted with 20 μl of PBS spread across entire tissue surface. After 30 minutes incubation tissues are topically exposed to the test chemical (50 mg per tissue) for 6 ± 0.25 hours. Four tissues (2 for MTT test 2 for colorant control) are used per test substance (TS) and two for the positive control (PC) and negative control (NC). At the end of the 6±0.25 hours treatment time, the test articles should be removed by extensively rinsing the tissues with PBS brought to room temperature. After rinsing, tissues are immediately transferred to and immersed in 5 ml of previously warmed assay medium (room temperature) in a pre-labelled 12-well plate for a 25 ± 2 minute immersion incubation (post-soak) at room temperature. This incubation in assay medium is intended to remove any test article absorbed into the tissue. At the end of the post-soak immersion, each insert is removed from the assay medium, the medium is decanted off the tissue, and the insert is blotted on absorbent material and transferred to the appropriate well of the pre-labelled 6-well plate containing 1 ml of warm assay medium. The tissues should be incubated for 18±0.25 hours at standard culture conditions (post-treatment incubation). At the end of the post-treatment incubation, each insert is removed from the 6-well plate and gently blotted on absorbent material. Two tissues are placed into the 24-well plate containing 0.3 ml of MTT solution and incubated for 180±10 minutes at standard culture conditions. Two tissues undergo the same procedure with medium instead MTT solution (colorant control).In the end of staining (incubation with medium) the bottom of all inserts is blotted on absorbent material, and inserts are then transferred to a pre-labelled 6-well plate containing 2 ml of isopropyl alcohol in each well so that no isopropyl alcohol is flowing into the insert. The plates are sealed with parafilm, and are either stored overnight at 2-8°C in the dark or immediately extracted. To extract the MTT, the plates are placed on an orbital plate shaker and shaken for 2 to 3 hours at room temperature. After extraction extracts are collected, mixed and two 200 μl aliquots are transferred to the appropriate wells of a pre-labeled 96-well plate for OD570 reading.
Irritation parameter:
other: viability of treated tissues
Value:
2.32
Negative controls validity:
valid
Positive controls validity:
valid
Remarks on result:
positive indication of irritation

Table No. 1:OD570values obtained at the MTT test, their averages, standard deviations (%) and relative viabilities.

 

Treatment

OD570 of tissues

Avg

SD

Average viability

 

Tissue 1

Tissue 2

(% NC)

 

water

1.628

1.526

1.608

1.619

1.595

0.018

100.00

 

NC

%

102.05

95.66

100.80

101.49

100.00

1.14

 

 

274/15

0.061

0.061

0.035

0.034

0.048

0.013

2.99

 

C2

%

3.82

3.82

2.19

2.13

2.993

0.83

C2CC

274/15-CC

0.001

0.002

0.021

0.019

0.011

0.009

0.67

 

%

0.06

0.13

1.32

1.19

0.67

0.56

PC

99% MA

0.339

0.313

0.380

0.355

0.346

0.021

21.74

 

 

%

21.25

19.62

23.82

22.25

21.74

1.30

 

Interpretation of results:
study cannot be used for classification
Conclusions:
Under the above-described experimental design, average viability of tissues treated by the test substance Reactive Orange 5 was 2.99 % of negative control average value. The measured value was then corrected, due to red colour of the test substance. Corrected viability of treated tissues was 2.32 %, i.e. viability was ≤ 60 %. The effect of the test substance was positive in EpiOcularTM model (tissues were damaged). According to the classification criteria given in chapter 4.5., the test substance, Reactive Orange 5, is identified as substance potentially requiring classification and labelling according to UN GHS (Category 2 or Category 1). Further testing with other test methods will be required.
Executive summary:

The test substance, Reactive Orange 5, was assayed for the in vitro eye irritation in human epidermal model EpiOcularTM. The test was performed according to the OECD Test GuidelineNo.492:Reconstructed human Cornea-like Epithelium (RhCE) test method for identifying chemicals not requiring classification and labelling for eye irritation or serious eye damage. Details of the procedure are given in Protocol: EpiOcular™ Eye Irritation Test (OCL-200-EIT) for the prediction of acute ocular irritation of chemicals (MatTek 06/29/2015).

After pre-incubation and wetting of tissues, 50 mg of the test substance was placed directly atop to the tissue and it was spread on the entire tissuesurface. Length of exposition was6 hours at 37±1°C in humidified CO2incubator (5±1% CO2). Two tissues were used for the test substance and every control. Two tissues more were used as colorant control to correction of possible colour interference, which was undergo the entire testing procedure excepting of incubation with MTT medium.

After removal of the test substance, tissues were post-soaked in medium for approximately 25 minutes and post-incubated for about 18 hours at culture conditions. Three hours incubation with MTT and two hours extraction period with shaking followed then. Optical density (OD570) of isopropyl alcohol extracts was measured on a plate reader. Relative cell viability was calculated for each tissue as % of the mean viability of the negative control tissues.

Direct MTT reduction of test substance was excluded in another study.

The assumed colour interference was solved with using of two colorant control tissues incubated by the same way as the other tissues except of colouring in MTT medium. Instead, these tissues were kept in assay medium. Average “viability” of the two tissues was then subtracted from viability of tissues incubated with MTT medium.

The first experiment was not successful due to high positive control value. The test must have been repeated. The results presented further are based on second experiment.

Under the above-described experimental designaverage viability of treated tissues was 2.99% (2.32 % after correction),i.e. viability was ≤60 %.

The effect of the test substance was positive in EpiOcularTMmodel (tissues were damaged).

According to the classification criteria given in chapter 4.5., the test substance, Reactive Orange 5, is identified as substance potentially requiring classification and labelling according to UN GHS (Category 2 or Category 1).

Further testing with other test methods will be required.

Endpoint:
eye irritation: in vivo
Type of information:
experimental study
Adequacy of study:
key study
Study period:
29.05.-05.06.2017
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to guideline
Guideline:
OECD Guideline 405 (Acute Eye Irritation / Corrosion)
Version / remarks:
Adopted October 2, 2012
Deviations:
yes
Remarks:
In the study only non-opioid analgesic was used for systemic analgesia. This change was performed because of avoiding a negative side effects of opioid analgesic.
GLP compliance:
yes (incl. QA statement)
Species:
rabbit
Strain:
New Zealand White
Details on test animals or tissues and environmental conditions:
TEST ANIMALS- Source: breeding farm VELAZ s.r.o., Lysolaje, Czech Republic, RČH CZ 21760118- Weight at study initiation: 2,2-2,9 kg- Housing: Conventional animal room – individually in metallic cages- Diet: Pelleted standard diet for experimental animals ad libitum- Water: Drinking tap water ad libitum (quality corresponding to the Regulation No.: 252/2004 Czech Coll. of Law) - Acclimation period: yesENVIRONMENTAL CONDITIONS- Room temperature: 20± 3°C, permanently monitored - Relative humidity: 30 – 70%, permanently monitored- Light period: 12 hour light/12 hour dark Study Time ScheduleAnimal supply: 24. 05. 2017Experimental part of study: 29. 05. – 05. 06. 2017Evaluation of results and final report elaboration: 05. 06. – 26. 06. 2017
Vehicle:
unchanged (no vehicle)
Controls:
yes, concurrent no treatment
Amount / concentration applied:
TEST MATERIAL- Amount(s) applied: 0,1 g- Test substance: it was used in delivery form-pH approximately 7
Duration of treatment / exposure:
24h
Observation period (in vivo):
1, 24, 48, and 72 hours
Number of animals or in vitro replicates:
1 female/initial test2 females/confirmatory test
Details on study design:
TEST PROCEDURE- 60 minutes before the test substance application Metacam 0.1 mL/kg was administered by subcutaneous injection to provide a therapeutic level of systemic analgesia.- 5 minutes before the test substance application one or two drops of a topical ocular anesthetics Benoxi 0.4% was applied to each eye. - 8 hours after the test substance application Metacam 0.1 mL/kg was administered by subcutaneous injection to provide a therapeutic level of systemic analgesia.PREPARATIONS - Preparation of experimental animals Approximately 24 hours before application both eyes of rabbits were examined to remove animals with eye irritation, ocular defects or corneal injury. Only healthy animals without eye defects were used for testing.- Preparation of the test substanceThe test substance was used in delivered form and it was weighted in quantities 0.1g per animal immediately before application.APPLICATION OF THE TEST SUBSTANCE- The test substance was placed in the conjunctival sac of one eye of animal after gently pulling the lower lid away from the eyeball. CLINICAL OBSERVATIONThe eyes were examined at 1, 24, 48 and 72 hours after application. After recording the observations at 72 hours, the eyes of rabbit were examined with the aid of fluorescein and the ophthalmoscopy. The grades of ocular reaction for single animal (observation of conjunctivae, cornea and iris) were recorded at each examination. In the end of observation period the animals were sacrificed by injection of veterinary preparation T61 (1 mL/kg).TOOL USED TO ASSESS SCORE: fluorescein and ophthalmoscopy
Irritation parameter:
cornea opacity score
Basis:
animal: 19, 21, 23
Time point:
24/48/72 h
Score:
0
Max. score:
0
Reversibility:
fully reversible
Remarks on result:
no indication of irritation
Irritation parameter:
iris score
Basis:
animal: 19, 21, 23
Time point:
24/48/72 h
Score:
0
Max. score:
0
Reversibility:
fully reversible
Remarks on result:
no indication of irritation
Irritation parameter:
conjunctivae score
Basis:
animal: 19, 21, 23
Time point:
24/48/72 h
Score:
0
Max. score:
0
Reversibility:
fully reversible
Remarks on result:
no indication of irritation
Irritation parameter:
chemosis score
Basis:
animal: 19, 21, 23
Time point:
24/48/72 h
Score:
0
Max. score:
0
Reversibility:
fully reversible
Remarks on result:
no indication of irritation
Interpretation of results:
GHS criteria not met
Conclusions:
Evaluation of ResultsRedness of conjunctivae - some blood vessels of conjunctivae were hyperaemic (injected) and chemosis of lids (some swelling above normal) were observed in all animals 1 hour after application of test substance. Due to coloration of the test substance the evaluation of irritation was difficult.No changes were observed on eye at 24 hour after application in all animals. No pathological changes of eyes of all rabbits were observed for the rest of the study. No clinical signs of systemic intoxication were detected. Evaluation of results after single application demonstrated that the test substance, Reactive Orange 5, is not irritating to eye of rabbit.
Executive summary:

The test substance,Reactive Orange 5,was tested for the assessment of eye irritation/corrosion effects using albino rabbit (New Zealand Albino breed).

The test was performed according to the OECD Test Guideline No. 405 Acute Eye Irritation/Corrosion. Adopted October 2, 2012.

Before In vivo testing the sequential testing strategy as it is recommended in supplement to TG 405(2012) was respected (see chapter 3. 1.).

The test was performed initially using one animal (No. 19). Because no corrosive or severe irritating effects were observed in initial test, the response was confirmed using two additional animals (No. 21 and No. 23).

 

Redness of conjunctivae - some blood vesselsof conjunctivae werehyperaemic (injected)and chemosis of lids (someswelling above normal) were observed in all animals 1 hour after application of test substance. Due to coloration of the test substance the evaluation of irritation was difficult.

No changes were observed on eye at 24, 48 and 72 hour after application in all animals

No clinical signs of systemic intoxication were detected.

 

Evaluation of results after single application demonstrated that the test substance, Reactive Orange 5, is not irritating to the eye of rabbit.

Endpoint conclusion
Endpoint conclusion:
no adverse effect observed (not irritating)

Additional information

Justification for classification or non-classification

Based on the available results of the test substance Reactive Orange 5 is not classified.