Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Eye Contact:

Rinse immediately with plenty of water for at least 15 minutes.

Skin Contact:

Wash immediately with plenty of water and soap.  If skin irritation or rash occurs: Get medical advice/attention. Take off contaminated clothing and wash all before reuse.

Ingestion:

If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give anything by mouth to an unconscious person.

Inhalation:

Remove to fresh air. If breathing is difficult, give oxygen. Avoid breathing dust/fume/gas/mist/vapours/spray.  Obtain medical advice if there are persistent symptoms.

Fire-fighting measures

Suitable Extinguishing Media:  Use water spray or fog, carbon dioxide or dry chemical.

Special hazards:  Keep containers cool by spraying with water if exposed to fire.

Protective Equipment:  Firefighters, and others exposed, wear self-contained breathing apparatus.  Avoid breathing  dust/fume/gas/mist/vapours/spray.

Accidental release measures

Where exposure level is not known, wear approved, positive pressure, self-contained respirator. Where exposure level is known, wear approved respirator suitable for level of exposure. In addition to the protective clothing/equipment in Section 8 (Exposure Controls/Personal Protection), wear impermeable boots.

Collect spillage. Cover spills with some inert absorbent material; sweep up and place in a waste disposal container.  Avoid release to the environment.

Handling and storage

Precautions:  Wear protective gloves/protective clothing/eye protection/face protection.  If on skin, wash thoroughly with soap and water after handling.  If skin irritation or rash occurs: Get medical advice/attention.  Take off contaminated clothing and wash it before reuse.

Special Handling Statements: Avoid breathing dust/fume/gas/mist/vapours/spray.  Provide good ventilation of working area (local exhaust ventilation if necessary). During processing and handling of the product, comply with the indicative occupational exposure limit values.

Store in a cool, dry, well ventilated place and keep container tightly closed. Observe the general rules of industrial fire protection. Sensitive to frost.

Storage Temperature:  Store at  1  -  25 °C

Reason: Quality.

Storage Class (TRGS 510): 10

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering Measures:  Engineering controls are not usually necessary if good hygiene practices are followed.

Respiratory Protection:  For operations where inhalation exposure can occur use an approved respirator. Recommendations are listed below. Other protective respiratory equipment may be used based on user's own risk assessment.

Recommended:  Full Face Mask with organic vapor cartridge, Type A filter (BP >65°C)

Eye protection:  Wear eye/face protection such as chemical splash proof goggles or face shield.

Skin Protection:  Avoid skin contact.

Wear impermeable gloves and suitable protective clothing.  Since this product is absorbed through the skin, care must be taken to prevent skin contact and contamination of clothing.  Take off contaminated clothing and wash all before reuse.

Hand protection:

Wear protective gloves. Recommendations are listed below. Other protective materials may be used based on user's own risk assessment. Barrier creams may help to protect the exposed areas of the skin, they should however not be applied once exposure has occurred. Replace gloves immediately when torn or any change in appearance (dimension, color, flexibility etc.) is noticed.

Gloves for repeated or prolonged exposure - non exhaustive list:  Butyl rubber (VB), thickness:  > 0.30 mm, break through time: up to 480 min

Gloves for short term exposure/splash protection - non exhaustive list: Nitrile rubber (NBR), thickness:  0.38 mm, break through time: up to 30 min

Not suitable gloves - non exhaustive list: Nitrile rubber (NBR), thickness:  0.12 mm.

The chemical resistance depends on the type of product and amount of product on the glove. Therefore gloves need to be changed when in contact with chemicals.  Due to many conditions (e.g. temperature, abrasion), the practical usage of a chemical protective glove in practice may be much shorter than the permeation time determined through testing. Use PE gloves as under gloves for difficult situations like for instance: high exposure, unknown composition or unknown properties of the chemicals.

Additional Advice:

Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water.

Stability and reactivity

Reactivity:       No information available

Chemical Stability:       Stable

Possibility of Hazardous Reactions:   Polymerization:       Will not occur

Conditions To Avoid:       None known

Incompatible  Materials:       None known

Hazardous Decomposition Products:         Carbon dioxide, carbon monoxide (CO)

Disposal considerations

Waste Treatment Methods:  Dispose of contents/container in accordance with local/regional/national /international regulations (to be specified). Manufacturer/supplier or the competent authority to specify whether disposal requirements apply to contents, container or both.  Avoid release to the environment.

The company encourages the recycle and reuse of products and packaging, where possible and permitted.

Product disposal:  When recycle or reuse is not possible, the company recommends that our products, especially when classified as hazardous, be disposed of by thermal treatment or incineration at approved facilities. All local and national regulations should be followed. For disposal within the European Community, waste codes according to Directive 2008/98/EC should be assigned by the user based on the application for which the product was used.

Dispose of contents/container to in accordance with local/regional/national /international regulations (to be specified). Manufacturer/supplier or the competent authority to specify whether disposal requirements apply to contents, container or both.

Packaging disposal:  Handle contaminated packages in the same way as the product itself. Disposal of emptied and cleaned packaging must be made in accordance with applicable local and national regulations.

Disposal-relevant information:  Do not release directly or indirectly to surface water, ground water, soil or public sewage system.