Registration Dossier

Administrative data

First-aid measures

Eye contact: Flush with water while holding eyelids open for at least 15 minutes. Seek medical attention immediately.

Skin contact: Remove contaminated clothing. Flush area with large amounts of water. Use soap. Seek medical attention.

Ingestion: Never give anything by mouth to an unconscious person. Wash out mouth with water. Do not induce vomiting unless directed by medical personnel. Seek medical attention immediately.

Inhalation: Remove to fresh air and keep patient at rest. Seek medical attention immediately.

Fire-fighting measures

Extinguishing media: Extinguish fires with C02, extinguishing powder or foam.
Hazardous combustion products: Formation of toxic gases is possible during heating or fire. May include oxides of carbon or nitrogen.
Fire fighting procedures: During all fire fighting activities, wear appropriate protective equipment, including self-contained breathing apparatus.
Fire/explosion hazards: Fine particles (such as mists) may fuel fires/explosions.

Accidental release measures

Health and safety precautions: Personnel involved in clean-up should wear appropriate personal protective equipment. Minimize exposure.
Measures for cleaning/collecting: Contain the source of spill if it is safe to do so. Collect spill with absorbent material. Clean spill area thoroughly.
Measures for environmental Protection: Place waste in an appropriately labeled, sealed container for disposal. Care should be taken to avoid environmental release.
Additional consideration for large spills: Non-essential personnel should be evacuated from affected area. Report emergency situations immediately. Clean up operations should only be undertaken by trained personnel.

Handling and storage

Restrict access to work area. Avoid open handling. Minimize generating airborne mists and vapors. Use process containment, local exhaust ventilation or perform work under fume hood/fume cupboard. Avoid inhalation and contact with skin, eye, and clothing. When handling, use appropriate personal protective equipment. Wash hands and any exposed skin after removal of PPE. Releases to the environment should be avoided. Review and implement appropriate technical and procedural waste water and waste disposal measures to prevent occupational exposure or environmental releases. Potential points of process emissions of this material to the atmosphere should be controlled with dust collectors, HEPA filtration systems or other equivalent controls. Store at room temperature in properly labeled containers. Keep away from heat, sparks and flames.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not regulated for transportation.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not regulated for transportation.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not regulated for transportation.
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not regulated for transportation.
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering controls should be used as a primary means of containment. Perform operations in a ventilated enclosure. Refer to applicable national standards and regulations in the selection and use of personal protective equipment (PPE).
Hands: Wear impervious gloves as minimum protection
Eyes: Wear safety glassess as minimum protection
Skin: Wear impervious protective clothing when handling this compound
Respiratory protection: Whenever excessive air contamination (dust, mist, vapour) is generated, respiratory protection, with appropriate protection factors, should be used to minimise exposure.

Stability and reactivity

Conditions to avoid: Fine particles (such as mists) may fuel fires/explosions. As a precautionary measure, keep away from heat sources and electrostatic discharge. Incompatible materials: As a precautionary measure, keep away from strong oxidizers

Disposal considerations

Dispose of waste in accordance with all applicable laws and regulations. Member State specific and Community specific provisions must be considered. Considering the relevant known environmental and human health hazards of the material, review and implement appropriate technical and procedural waste water and waste disposal measures to prevent occupational exposure and environmental release. It is recommended that waste minimization be practiced. The best available technology should be utilized to prevent environmental releases. This may include destructive techniques for waste and wastewater.