Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 200-267-5 | CAS number: 56-34-8
Flash point
Administrative data
Link to relevant study record(s)
- Endpoint:
- flash point, other
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- comparable to guideline study
- Justification for type of information:
- Experimental result performed using standard methods of analysis
- Qualifier:
- according to guideline
- Guideline:
- other: as mentioned below
- Principles of method if other than guideline:
- The flash point of Tetraethylammonium chloride was determined via closed cup method using Pensky-Martens flash point apparatus.
- GLP compliance:
- not specified
- Type of method:
- closed cup
- Flash point apparatus:
- Pensky-Martens apparatus
- Specific details on test material used for the study:
- Name of the test chemical: Tetraethylammonium chloride
Molecular formula:C8H20ClN
Molecular weight: 165.706 g/mol
Smiles Notation: [N+](CC)(CC)(CC)CC.[ClH-]
InChI: 1S/C8H20N.ClH/c1-5-9(6-2,7-3)8-4;/h5-8H2,1-4H3;1H/q+1;/p-1
Substance Type: Organic
Physical State: Hygroscopic white Powder - Key result
- Flash point:
- 94 °C
- Atm. press.:
- 964.9 hPa
- Remarks on result:
- other: no other details mentioned
- Interpretation of results:
- other: non flammable
- Conclusions:
- The mean flash point of Tetraethylammonium chloride was determined to be 94°C at 964.9 hPa.
- Executive summary:
The flash point determination of Tetraethylammonium chloride (CAS No. 56-34-8) was done following closed cup method using Pensky-Martens flash point apparatus. The test was conducted in replicates and mean flash point was determined to be 94°C at 964.9 hPa.
Reference
TEST DESCRIPTION AND RESULT
Method Details
|
Observations |
Remarks if, any |
|
Method |
Closed cup method |
|
|
Principle of Flash point test |
The flash point of a flammable liquid is the lowest temperature at which there will be enough flammable vapor to ignite when an ignition source is applied. |
|
|
Type of method |
· |
|
|
Flash point apparatus |
· · |
Pensky-Martens flash point apparatus |
|
Quantity of chemical used |
g/ml |
1 g |
|
Ignition source |
Gas lighter/flame |
Gas lighter |
|
Atmospheric pressure |
hPa |
964.9hPa |
|
meanFlash point (RESULT) |
°C |
94°C |
|
Description of key information
The mean flash point of Tetraethylammonium chloride was determined to be 94°C at 964.9 hPa.
Key value for chemical safety assessment
- Flash point at 101 325 Pa:
- 94 °C
Additional information
The flash point determination of Tetraethylammonium chloride (CAS No. 56-34-8) was done following closed cup method using Pensky-Martens flash point apparatus. The test was conducted in replicates and mean flash point was determined to be 94°C at 964.9 hPa.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
