Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
General information: In case of accident or if you feel unwell, seek medical advice immediately.
After inhalation: Supply fresh air. Call a doctor immediately.
After skin contact: Immediately wash with water and soap and rinse thoroughly. Call a doctor immediately.
After eye contact: Rinse opened eye for several minutes under running water. Call a doctor immediately.
After swallowing: Rinse out mouth and then drink plenty of water. Do not induce vomiting; call for medical help immediately.

Most important symptoms and effects, both acute and delayed No further relevant information available.

Indication of any immediate medical attention and special treatment needed: No further relevant information available.

Fire-fighting measures

Extinguishing media
Suitable extinguishing agents: CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
For safety reasons unsuitable extinguishing agents: Water with full jet

Special hazards arising from the substance or mixture
In case of fire, the following can be released: Oxygen, Nitrogen oxides (NOx)

Advice for firefighters
Protective equipment: Wear self-contained respiratory protective device. Wear fully protective suit.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
The usual precautionary measures are to be adhered to when handling chemicals.
Wear protective equipment. Keep unprotected persons away.
Avoid formation of dust.

Environmental precautions:
Do not allow to enter sewers/ surface or ground water.
Do not allow to penetrate the ground/soil.

Methods and material for containment and cleaning up:
Pick up mechanically.
Send for recovery or disposal in suitable receptacles.

Reference to other sections:
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.

Handling and storage

Precautions for safe handling:
Wear protective equipment. Keep unprotected persons away.
The usual precautionary measures are to be adhered to when handling chemicals.
Information about fire - and explosion protection:
In case of fire, the following can be released: see chapter 5

Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles: Corrosive action on metals.
Information about storage in one common storage facility: Store away from flammable substances.
Further information about storage conditions:
Keep container tightly sealed.
This product is hygroscopic.

Specific end use(s): No further relevant information available.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN3085
Shipping information
Proper shipping name and description:
3085 OXIDIZING SOLID, CORROSIVE, N.O.S. (Platinum(II) nitrate)
Chemical name:
Platinum dinitrate
Labels:
5.1+ 8
Special provisions / remarks
Remarks:
Environmental hazards: Not applicable.
Special precautions for user Warning: Oxidising substances.
Danger code (Kemler): 58
Limited quantities (LQ) 1 kg
Transport category 2
Tunnel restriction code E
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
UN3085
Shipping information
Proper shipping name and description:
OXIDIZING SOLID, CORROSIVE, N.O.S. (Platinum(II) nitrate)
Chemical name:
Platinum dinitrate
Labels:
5.1+ 8
Special provisions / remarks
Remarks:
Environmental hazards: Not applicable.
Special precautions for user Warning: Oxidising substances.
Danger code (Kemler): 58

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN3085
Shipping information
Proper shipping name and description:
OXIDIZING SOLID, CORROSIVE, N.O.S. (Platinum(II) nitrate)
Chemical name:
Platinum dinitrate
Labels:
5.1+ 8
Special provisions / remarks
Remarks:
Environmental hazards: Not applicable.
Special precautions for user Warning: Oxidising substances.
Danger code (Kemler): 58

Additional transport information

Additional information
Special provisions / remarks / other:
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code: Not applicable.
UN "Model Regulation": UN3085, OXIDIZING SOLID, CORROSIVE, N.O.S. (Platinum(II) nitrate), 5.1 (8), II

Exposure controls / personal protection

Additional information about design of technical facilities: Ensure good ventilation/exhaustion at the workplace.

Control parameters
Ingredients with limit values that require monitoring at the workplace:
Additional information: The lists valid during the making were used as basis.

Exposure controls
Personal protective equipment:
General protective and hygienic measures: The usual precautionary measures are to be adhered to when handling chemicals. Do not eat, drink, smoke or sniff while working. Wash hands before breaks and at the end of work. Immediately remove all soiled and contaminated clothing
Respiratory protection: Use respiratory protective device against the effects of fumes/dust/aerosol. Filter P3.
Protection of hands: Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
For the permanent contact of a maximum of 15 minutes gloves made of the following materials are suitable: Nitrile rubber, NBR; Fluorocarbon rubber (Viton)
Eye protection: Safety glasses
Body protection: Protective work clothing

Stability and reactivity

Reactivity

Chemical stability
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.

Possibility of hazardous reactions: No dangerous reactions known.

Conditions to avoid: No further relevant information available.

Incompatible materials: Store away from flammable substances. Corrosive action on metals.

Hazardous decomposition products: Nitrogen oxides

Additional information: -

Disposal considerations

Waste treatment methods
Recommendation
Contact manufacturer for recycling information.
Disposal must be made according to official regulations.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
Recommended cleansing agents: Water, if necessary together with cleansing agents.