Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 240-457-5 | CAS number: 16409-43-1
Guidance on Safe Use
Administrative data
First-aid measures
General advice:
Remove contaminated clothing. If the patient is likely to become unconscious, place and transport in
stable sideways position (recovery position). First aid personnel should pay attention to their own
safety.
If inhaled:
Keep patient calm, remove to fresh air, seek medical attention.
On skin contact:
Wash thoroughly with soap and water.
On contact with eyes:
Immediately wash affected eyes for at least 15 minutes under running water with eyelids held open,
consult an eye specialist.
On ingestion:
Immediately rinse mouth and then drink plenty of water, do not induce vomiting, seek medical
attention.
Fire-fighting measures
Suitable extinguishing media:
water spray, dry powder, alcohol-resistant foam, carbon dioxide
Unsuitable extinguishing media for safety reasons:
water jet
Special protective equipment:
Wear a self-contained breathing apparatus.
Further information:
Collect contaminated extinguishing water separately, do not allow to reach sewage or effluent
systems. Dispose of fire debris and contaminated extinguishing water in accordance with official
regulations. Keep containers cool by spraying with water if exposed to fire.
Accidental release measures
Personal precautions:
Ensure adequate ventilation. Avoid all sources of ignition: heat, sparks, open flame. Avoid contact with
the skin, eyes and clothing.
Environmental precautions:
Do not discharge into drains/surface waters/groundwater.
Methods for cleaning up or taking up:
For large amounts: Dike spillage. Cover with blanket of foam (alcohol-resistant foam). Pump off
product. Dispose of absorbed material in accordance with regulations.
For residues: Contain with absorbent material (e.g. sand, silica gel, acid binder, general purpose
binder, sawdust). Dispose of absorbed material in accordance with regulations.
Handling and storage
Handling
Ensure thorough ventilation of stores and work areas. Wear suitable protective clothing and eye/face
protection. Avoid contact with the skin, eyes and clothing. Keep container tightly sealed.
Protection against fire and explosion:
The product is combustible. Avoid all sources of ignition: heat, sparks, open flame. Take precautionary
measures against static discharges. If exposed to fire, keep containers cool by spraying with water.
Storage
Further information on storage conditions: Keep container tightly closed in a cool, well-ventilated
place. Protect containers from physical damage.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Personal protective equipment
Respiratory protection:
Combination filter for gases/vapours of organic, inorganic, acid inorganic, alkaline compounds and
toxic particles (e. g. EN 14387 Type ABEK-P3)
Hand protection:
Suitable chemical resistant safety gloves (EN 374) also with prolonged, direct contact
(Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN
374): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) and other
Manufacturer's directions for use should be observed because of great diversity of types.
Eye protection:
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Body protection:
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting
boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of
dust).
General safety and hygiene measures:
Avoid contact with the skin, eyes and clothing. Handle in accordance with good industrial hygiene and
safety practice.
Stability and reactivity
Corrosion to metals: Corrosive effects to metal are not anticipated.
Hazardous reactions:
No hazardous reactions if stored and handled as prescribed/indicated.
Disposal considerations
Observe national and local legal requirements.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
