Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 212-742-4 | CAS number: 865-49-6
Guidance on Safe Use
Guidance on Safe Use
Currently viewing:
Administrative data
First-aid measures
Description of first aid measures
General advice
First aider needs to protect himself.
After inhalation: fresh air. Immediately call in physician. If breathing stops: immediately apply artificial respiration, if necessary also oxygen.
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Consult a physician.
After eye contact: rinse out with plenty of water. Call in ophthalmologist.
After swallowing: caution if victim vomits. Risk of aspiration! Keep airways free. Pulmonary failure possible after aspiration of vomit. Call a physician immediately. Subsequently administer: activated charcoal (20 - 40 g in 10% slurry).
Most important symptoms and effects, both acute and delayed
irritant effects, Cough, Shortness of breath, respiratory arrest, Dizziness, narcosis, agitation, spasms, inebriation, Nausea, Vomiting, Stomach/intestinal disorders, cardiovascular disorders, Headache, ataxia (impaired locomotor coordination)
Drying-out effect resulting in rough and chapped skin.
Indication of any immediate medical attention and special treatment needed
Laxative: Sodium sulfate (1 tablespoon/1/4 l water).
General advice
First aider needs to protect himself.
After inhalation: fresh air. Immediately call in physician. If breathing stops: immediately apply artificial respiration, if necessary also oxygen.
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Consult a physician.
After eye contact: rinse out with plenty of water. Call in ophthalmologist.
After swallowing: caution if victim vomits. Risk of aspiration! Keep airways free. Pulmonary failure possible after aspiration of vomit. Call a physician immediately. Subsequently administer: activated charcoal (20 - 40 g in 10% slurry).
Most important symptoms and effects, both acute and delayed
irritant effects, Cough, Shortness of breath, respiratory arrest, Dizziness, narcosis, agitation, spasms, inebriation, Nausea, Vomiting, Stomach/intestinal disorders, cardiovascular disorders, Headache, ataxia (impaired locomotor coordination)
Drying-out effect resulting in rough and chapped skin.
Indication of any immediate medical attention and special treatment needed
Laxative: Sodium sulfate (1 tablespoon/1/4 l water).
Fire-fighting measures
Extinguishing media
Suitable extinguishing media
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Unsuitable extinguishing media
For this substance/mixture no limitations of extinguishing agents are given.
Special hazards arising from the substance or mixture
Not combustible.
Ambient fire may liberate hazardous vapours.
Fire may cause evolution of:
Hydrogen chloride gas, Phosgene
Advice for firefighters
Special protective equipment for firefighters
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Further information
Suppress (knock down) gases/vapours/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system.
Suitable extinguishing media
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Unsuitable extinguishing media
For this substance/mixture no limitations of extinguishing agents are given.
Special hazards arising from the substance or mixture
Not combustible.
Ambient fire may liberate hazardous vapours.
Fire may cause evolution of:
Hydrogen chloride gas, Phosgene
Advice for firefighters
Special protective equipment for firefighters
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Further information
Suppress (knock down) gases/vapours/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system.
Accidental release measures
Personal precautions, protective equipment and emergency procedures
Advice for non-emergency personnel: Do not breathe vapours, aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Advice for emergency responders:
Protective equipment see section Exposure controls/personal protection.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections Handling and storage and Stability and reactivity). Take up with liquid-absorbent material (e.g. Chemizorb® ). Dispose of properly. Clean up affected area. Do not inhale vapours.
Reference to other sections
Indications about waste treatment see section Disposal considerations.
Advice for non-emergency personnel: Do not breathe vapours, aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Advice for emergency responders:
Protective equipment see section Exposure controls/personal protection.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections Handling and storage and Stability and reactivity). Take up with liquid-absorbent material (e.g. Chemizorb® ). Dispose of properly. Clean up affected area. Do not inhale vapours.
Reference to other sections
Indications about waste treatment see section Disposal considerations.
Handling and storage
Handling and storage
Precautions for safe handling
Advice on safe handling
Work under hood. Do not inhale substance/mixture. Avoid generation of vapours/aerosols.
Observe label precautions.
Hygiene measures
Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.
Conditions for safe storage, including any incompatibilities
Storage conditions
Protected from light. Tightly closed. Keep in a well-ventilated place. Keep locked up or in an area accessible only to qualified or authorised persons.
Recommended storage temperature see product label.
Specific end use(s)
See exposure scenario.
Precautions for safe handling
Advice on safe handling
Work under hood. Do not inhale substance/mixture. Avoid generation of vapours/aerosols.
Observe label precautions.
Hygiene measures
Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.
Conditions for safe storage, including any incompatibilities
Storage conditions
Protected from light. Tightly closed. Keep in a well-ventilated place. Keep locked up or in an area accessible only to qualified or authorised persons.
Recommended storage temperature see product label.
Specific end use(s)
See exposure scenario.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- UN 1888
Shipping information
- Proper shipping name and description:
- CHLOROFORM
Special provisions / remarks
- Special provisions:
- yes; Tunnel restriction code E
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- not relevant
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- UN 1888
Shipping information
- Proper shipping name and description:
- CHLOROFORM
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- UN 1888
Shipping information
- Proper shipping name and description:
- CHLOROFORM
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Engineering measures
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment.
See section Precautions for safe handling.
Individual protection measures
Protective clothing needs to be selected specifically for the workplace, depending on concentrations and quantities of the hazardous substances handled. The chemical resistance of the protective equipment should be enquired at the respective supplier.
Eye/face protection
Safety glasses
Hand protection
full contact:
Glove material: Viton (R)
Glove thickness: 0,70 mm
Break through time: > 480 min
splash contact:
Glove material: butyl-rubber
Glove thickness: 0,7 mm
Break through time: > 10 min
The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 890 Vitoject® (full contact), KCL 898 Butoject® (splash contact).
The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types.
This recommendation applies only to the product stated in the safety data sheet<(>,<)> supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Other protective equipment
protective clothing
Respiratory protection
required when vapours/aerosols are generated.
Recommended Filter type: Filter AX (EN 371)
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Environmental exposure controls
Do not let product enter drains.
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment.
See section Precautions for safe handling.
Individual protection measures
Protective clothing needs to be selected specifically for the workplace, depending on concentrations and quantities of the hazardous substances handled. The chemical resistance of the protective equipment should be enquired at the respective supplier.
Eye/face protection
Safety glasses
Hand protection
full contact:
Glove material: Viton (R)
Glove thickness: 0,70 mm
Break through time: > 480 min
splash contact:
Glove material: butyl-rubber
Glove thickness: 0,7 mm
Break through time: > 10 min
The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 890 Vitoject® (full contact), KCL 898 Butoject® (splash contact).
The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types.
This recommendation applies only to the product stated in the safety data sheet<(>,<)> supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Other protective equipment
protective clothing
Respiratory protection
required when vapours/aerosols are generated.
Recommended Filter type: Filter AX (EN 371)
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Environmental exposure controls
Do not let product enter drains.
Stability and reactivity
Reactivity
See section Possibility of hazardous reactions
Chemical stability
heat-sensitive
Sensitivity to light
Possibility of hazardous reactions
Risk of explosion with:
Ammonia, Amines, nitrogen oxides, bases, Oxygen, alkali amides, organic nitro compounds, Alcohols, alkali hydroxides, strong alkalis, Fluorine, peroxi compounds, Alkaline earth metals, Alkali metals, Powdered metals
Methanol, with, alcoholates
Methanol, with, strong alkalis
Iron, in powder form
various alloys, sensitive to shock
Methanol, with, Sodium hydroxide
magnesium, in powder form
Oxygen, with, alkali compounds
Aluminium, in powder form
Acetone, with, alkali compounds
Potassium, sensitive to shock
sodium, sensitive to shock
Violent reactions possible with:
phosphines, bis(dimethylamino)dimethyl tin, nonmetallic hydrogen compounds, Powdered metals, Light metals, Ketones, mineral acids, Strong oxidizing agents, semimetallic hydrogen compounds
Conditions to avoid
no information available
Incompatible materials
rubber, various plastics
Hazardous decomposition products
in the event of fire: See section Firefighting measures.
See section Possibility of hazardous reactions
Chemical stability
heat-sensitive
Sensitivity to light
Possibility of hazardous reactions
Risk of explosion with:
Ammonia, Amines, nitrogen oxides, bases, Oxygen, alkali amides, organic nitro compounds, Alcohols, alkali hydroxides, strong alkalis, Fluorine, peroxi compounds, Alkaline earth metals, Alkali metals, Powdered metals
Methanol, with, alcoholates
Methanol, with, strong alkalis
Iron, in powder form
various alloys, sensitive to shock
Methanol, with, Sodium hydroxide
magnesium, in powder form
Oxygen, with, alkali compounds
Aluminium, in powder form
Acetone, with, alkali compounds
Potassium, sensitive to shock
sodium, sensitive to shock
Violent reactions possible with:
phosphines, bis(dimethylamino)dimethyl tin, nonmetallic hydrogen compounds, Powdered metals, Light metals, Ketones, mineral acids, Strong oxidizing agents, semimetallic hydrogen compounds
Conditions to avoid
no information available
Incompatible materials
rubber, various plastics
Hazardous decomposition products
in the event of fire: See section Firefighting measures.
Disposal considerations
Waste treatment methods
for processes regarding the return of chemicals and containers contact the supplier in case of questions.
for processes regarding the return of chemicals and containers contact the supplier in case of questions.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
