Registration Dossier

Administrative data

First-aid measures

>>> If inhaled
- Move to fresh air in case of accidental inhalation of fumes from overheating or combustion.
- Oxygen or artificial respiration if needed.
>>> In case of eye contact
- Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
- If eye irritation persists, consult a specialist.
>>>. In case of skin contact
- Wash off with soap and water.
>>> If swallowed
- Drink 1 or 2 glasses of water.
- Do NOT induce vomiting.
- If symptoms persist, call a physician.

Fire-fighting measures

Advice for firefighters
- Wear self-contained breathing apparatus and protective suit.
- When intervention in close proximity wear acid resistant over suit.
- Evacuate personnel to safe areas.
- Approach from upwind.
- Protect intervention team with a water spray as they approach the fire.
- Keep containers and surroundings cool with water spray.
- Keep product and empty container away from heat and sources of ignition.

Accidental release measures

>>>>Personal precautions, protective equipment and emergency procedures
Advice for non-emergency personnel
- Prevent further leakage or spillage if safe to do so.
Advice for emergency responders
- Ensure adequate ventilation.
- Material can create slippery conditions.
- Sweep up to prevent slipping hazard.
- Keep away from open flames, hot surfaces and sources of ignition.
>>> Environmental precautions
- Should not be released into the environment.
- Do not flush into surface water or sanitary sewer system.
>>>Methods and materials for containment and cleaning up
- Soak up with inert absorbent material.
- Suitable material for picking up
- Dry sand
- Earth
- Shovel into suitable container for disposal.

Handling and storage

>>>>Precautions for safe handling
- Do not use in areas without adequate ventilation.
- To avoid thermal decomposition, do not overheat.
- Keep away from heat and sources of ignition.
>>>>Conditions for storage, including incompatibilities
- No special storage conditions required.
- Keep away from heat and sources of ignition.
- Keep in properly labelled containers.
- Keep away from combustible material.
- Keep away from incompatible products
- Provide tight electrical equipment well protected against corrosion.
- Refer to protective measures listed in sections 7 and 8.
>>> Packaging material - Suitable material
- Plastic material

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

>>>>Appropriate engineering controls
- Provide local ventilation appropriate to the product decomposition risk
- Apply technical measures to comply with the occupational exposure limits.
>>> Individual protection measures
Respiratory protection
- No personal respiratory protective equipment normally required.
- Use respirator when performing operations involving potential exposure to vapour of the product.
- Use only respiratory protection that conforms to international/ national standards.

Stability and reactivity

- No dangerous reaction known under conditions of normal use.
Chemical stability
- Stable under recommended storage conditions.
Possibility of hazardous reactions
- No dangerous reaction known under conditions of normal use.
Conditions to avoid
- To avoid thermal decomposition, do not overheat.
Incompatible materials
- Oxidizing agents
Hazardous decomposition products
- Gaseous hydrogen fluoride (HF)., Fluorophosgene, Gaseous hydrogen chloride (HCl).

Disposal considerations

. Waste treatment methods
- Can be incinerated, when in compliance with local regulations.
- The incinerator must be equipped with a system for the neutralisation or recovery of HF.
- In accordance with local and national regulations.
Contaminated packaging
- Empty containers can be landfilled, when in accordance with the local regulations.