Registration Dossier

Physical & Chemical properties

Flammability

Currently viewing:

Administrative data

Endpoint:
flammable solids
Type of information:
experimental study
Adequacy of study:
key study
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
other: Study well documented, following official guidelines, not GLP compliant

Data source

Reference
Reference Type:
study report
Title:
Unnamed
Year:
2015
Report Date:
2015

Materials and methods

Test guideline
Qualifier:
according to
Guideline:
EU Method A.10 (Flammability (Solids))
Principles of method if other than guideline:
The test was performed according to the Dir. 92/69/EEC (OJ L383A) protocol.
GLP compliance:
no

Test material

Reference
Name:
Unnamed
Type:
Constituent
Test material form:
solid: particulate/powder

Results and discussion

Pyrophoric solids
Test procedure:
ignition time on contact with air
Remarks:
Ignition on contact with air refers to either Pyrophoric solids or Pyrophoric liquids depending on physical state (migrated information).
Remarks on result:
no ignition on contact with air (not further specified)
Remarks:
corresponding to 'no' in migrated source record. | Remarks: | Additional remarks: No ignition on contact with air was ever noted.
Pyrophoric liquids
Test procedure:
ignition time on contact with air
Remarks:
Ignition on contact with air refers to either Pyrophoric solids or Pyrophoric liquids depending on physical state (migrated information).
Remarks on result:
no ignition on contact with air (not further specified)
Remarks:
corresponding to 'no' in migrated source record. | Remarks: | Additional remarks: No ignition on contact with air was ever noted.
Substances / mixtures which in contact with water emit flammable gases
Remarks on result:
no reaction with water observed
Remarks:
corresponding to 'no' in migrated source record.| Remarks: | Additional remarks: No release of flammable gas in contact with water was ever reported.

Any other information on results incl. tables

Test substance did not catch fire. The substance did not propagate burning of a 200 mm length of the strip in less than four minutes, therefore burning rate test did not need to be performed.

Applicant's summary and conclusion

Interpretation of results:
non flammable
Remarks:
Migrated information
Conclusions:
The substance was tested following Dir 92/69/EEC. Under the experimental conditions the substance did not propagate burning of a 200 mm length of the strip in less than four minutes, therefore burning rate test does not need to be performed.
Executive summary:

The substance was tested following Dir 92/69/EEC. Under the experimental conditions the substance did not propagate burning of a 200 mm length of the strip in less than four minutes, therefore burning rate test does not need to be performed.