Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

General information: Medical treatment necessary. Remove victim out of the danger area. Put victim at rest, cover with a blanket and keep warm. Do not leave affected person unattended. If unconscious place in recovery position and seek medical advice.
In case of inhalation: Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.
In case of skin contact: Wash immediately with: Water Do not wash with: Solvents/Thinner.
After eye contact: In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.
After ingestion: Rinse mouth thoroughly with water. Call a physician in any case! Do NOT induce vomiting.

Fire-fighting measures

Suitable extinguishing media: alcohol resistant foam. Extinguishing powder.
Unsuitable extinguishing media: Strong water jet. Water mist.
In case of fire may be liberated: Carbon dioxide (CO2) Carbon monoxide (CO).
Advice for firefighters: Do not inhale explosion and combustion gases. Use water spray jet to protect personnel and to cool endangered containers. Do not allow run-off from fire-fighting to enter drains or water courses.
Special protective equipment for firefighters: Wear a self-contained breathing apparatus and chemical protective clothing.

Accidental release measures

Personal precautions, protective equipment and emergency procedures: Special danger of slipping by leaking/spilling product. Do not breathe gas/fumes/vapour/spray. Provide adequate ventilation. Remove persons to safety.
Environmental precautions: Ensure all waste water is collected and treated via a waste water treatment plant. In case of entry into waterways, soil or drains, inform the responsible authorities.
Methods and material for containment and cleaning up: Suitable material for taking up: Sand, Kieselguhr, Universal binder, Sawdust. Collect in closed and suitable containers for disposal.

Handling and storage

Precautions for safe handling: Provide adequate ventilation as well as local exhaustion at critical locations. When using do not eat, drink, smoke, sniff. Wash hands before breaks and after work. All work processes must always be designed so that the following is as low as possible: eye contact, skin contact. In case of entry into waterways, soil or drains, inform the responsible authorities. Wear personal protection equipment.
Technical measures and storage conditions: Keep the packing dry and well sealed to prevent contamination and absorbtion of humidity. Never use pressure to empty container.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

When using do not eat, drink, smoke, sniff. Wash hands before breaks and after work.
Provide adequate ventilation as well as local exhaustion at critical locations. If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn.
Eye/face protection: Eye glasses with side protection
Skin protection: Hand protection
Gloves: The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. Breakthrough times and swelling properties of the material must be taken into consideration.
Suitable material : Butyl caoutchouc (butyl rubber); Required properties : >480 min.; Thickness of the glove material : 1.00 mm.; Body protection: Overall
Respiratory protection: Respiratory protection necessary at exceeding exposure limit values or insufficient ventilation insufficient exhaust
Handling larger quantities. Container device with compressed air (DIN EN 137) / Filtering device (full mask or mouthpiece) with filter: Filter types:A, B, E, K. Class 1: Maximum permitted contaminant concentration in inhaled air = 1000 mL/m3 (0.1 % by vol.); class 2: maximum permitted contaminant concentration in inhaled air = 5000 mL/m3 (0.5 % by vol.); class 3: maximum permitted contaminant concentration in inhaled air = 10000 mL/m3 (1.0 % by vol.)
Environmental exposure controls: Send to a hazardous waste incinerator facility under observation of official regulations.

Stability and reactivity

Exothermic reaction with oxidising agents, strong acids and strong alkali possible.
Decomposition to Carbon dioxide (CO2) and Carbon monoxide (CO).

Disposal considerations

Send to a hazardous waste incinerator facility under observation of official regulations. Clean IBCs or drums at approved facility only. Contaminated packages must be completely emptied and can be re-used following proper cleaning. Packing which cannot be properly cleaned must be disposed of. Handle contaminated packages in the same way as the substance itself.

Categories Display