Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Fire-fighting measures

Accidental release measures

Handling and storage

Technologies to minimise emission and exposure: The company produce about 70 API (Active Pharmaceutical Ingredients) and is inspected regularly by Italian Ministry of Health and FDA of USA. The strictly controlled conditions are required also by Good Manufacturing Practices to minimise cross contamination.Sampling procedure: in vented cabinets and Hepa-filters (controlled area)Dispensing: in vented cabinets and Hepa-filters (controlled area)Charging of materials:- Liquids: from tank farm, by means of pump and pipe (closed system), from drums: by vacuum transfer- Solids: through manhole, with aspiration inside vessel and local aspiration around manholeReactions: all in closed systemDischarge of materials:- Liquids: by closed system- Solids: bulk containers for intermediate- Liquid wastes: by closed system to a tanks for external disposalControl of emissions:- From reaction equipments: collected by pipes to a waste gas incinerator- From the working environment: collected by pipes to a wet scrubber treatment Environmental monitoring of working area: performed by external and approved firmTraining of personnel:- Periodical and repeated course for safe handling of materials and equipment, GMP procedure, emergency procedure- The personnel have access to MDS of row materials, intermediates and finished products - only properly trained and authorised personnel handle the substanceHealth management: the company strictly applies the legislation in forceProcedural and control technologies shall be used that minimise emission and any resulting exposure.Only properly trained and authorised personnel handle the substance.In the case of cleaning and maintenance works, special procedures such as purging and washing are applied before the system is opened and entered; in cases of accident and where waste is generated, procedural and/or control technologies are used to minimise emissions and the resulting exposure during purification or cleaning and maintenance procedures; substance-handling procedures are well documented and strictly supervised by the site operator. Waste gas incineration: complete destruction of waste gases at high temperatures for a specified minimum residence time, as calculated by an engineer Condenser – low temperature devices through which waste vapours are sent causing them to liquefy and be collected. Scrubber – number of types available. Usually packed columns around which an appropriate scrubbing solution circulates, as specified by an engineer. The waste vapours from a process and/or area are passed through the scrubber causing the fumes to be trapped in the scrubbing solution. The waste scrubber solution is then disposed of by incineration.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Disposal considerations