Registration Dossier

Administrative data

First-aid measures

Description of First Aid Measures
Eye contact
- Flush eyes with water while lifting the upper and lower lids. Seek medical help if irritation develops
and persists.
Skin contact
- Wash with soap and water. Get medical attention if irritation develops or persists.
Inhalation
- Remove victim to fresh air. Get medical attention if irritation develops or persists.
Ingestion
- If conscious, wash out mouth with small amount of water. Do not give anything to an unconsciousness or drowsy person. Do not induce vomiting. Get medical attention.
Most Important symptoms and effects, both acute and delayed
- None expected under normal use.
Indication of any immediate medical attention and special treatment needed
- Immediate medical treatment is not anticipated to be required.

Fire-fighting measures

Extinguishing Media
- Water spray, carbon dioxide, dry chemical or foam to extinguish fires.
Special Hazards Arising from the Substance or Mixture
Unusual Fire and Explosion Hazards
- None
Combustion Products
- Carbon dioxide and carbon monoxide.
Advice for Fire-Fighters
- Firefighters should wear full emergency equipment and approved positive pressure self-contained breathing apparatus. Cool exposed intact containers with water spray or stream.

Accidental release measures

Personal Precautions, Protective Equipment and Emergency Procedures:
Personal Protective Measurers
Eye/face Protection
- Wear safety glasses or chemical safety goggles to avoid eye contact.
Skin Protection
- Impervious clothing is recommended if needed to avoid skin contact.
Hands
- Impervious gloves such as rubber are recommended if needed to avoid prolonged contact.
Respiratory Protection
- None normally needed. If the exposures are high use an approved respirator with a particulate filter. Selection of respiratory protection depends on the contaminant type, form and concentration. Select in accordance with good Industrial Hygiene practice.
Other protection
- Suitable eye and skin washing facilities should be available in the work area.
Environmental Precautions
- Prevent entry in storm sewers and waterways. Report spill as required by local and federal regulations.
Methods and Material for Containment and Cleaning Up
- Collect solid material in a manner that minimizes the generation of airborne dust. Clean area thoroughly to prevent accumulation of dust in the work area. Place into closable containers for disposal.
Waste Treatment Methods
- Dispose of contents/container in accordance with local/regional/national/international regulations.

Handling and storage

Precautions for Safe Handling
- Use suitable protective equipment. Avoid contact with eyes, skin and clothing. Avoid breathing dust. Use with adequate ventilation. Wash thoroughly after handling. Remove contaminated clothing and launder before re-use. Do not eat, drink, or smoke while handling. Practice good housekeeping to prevent accumulation of dust in the work area.
Conditions for Safe Storage, Including any Incompatibilities
- Protect containers from physical damage. Keep containers closed when not in use. Follow all SDS precautions in handling empty containers.
Specific end use(s)
Industrial uses
- Industrial intermediate in the production of polymers
Professional uses
- None identified

Transport information

Land transport (ADR/RID)

UN number:
not regulated
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
not regulated
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
not regulated
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
not regulated
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure Controls
Recommended Monitoring Procedures
- None
Appropriate Engineering Controls
- Good general room ventilation should be adequate under normal conditions. If exposures are excessive, mechanical ventilation such as local exhaust may be required.

Personal Protective Measurers
Eye/face Protection
- Wear safety glasses or chemical safety goggles to avoid eye contact.
Skin Protection
- Impervious clothing is recommended if needed to avoid skin contact.
Hands
- Impervious gloves such as rubber are recommended if needed to avoid prolonged contact.
Respiratory Protection
- None normally needed. If the exposures are high use an approved respirator with a particulate filter. Selection of respiratory protection depends on the contaminant type, form and concentration. Select in accordance with good Industrial Hygiene practice.
Other protection
- Suitable eye and skin washing facilities should be available in the work area.

Stability and reactivity

Reactivity
- Not reactive under normal conditions
Chemical Stability
- Stable.
Possibility of Hazardous Reactions
- None known
Conditions to Avoid
- Keep away from extreme heat.
Incompatible Materials
- Incompatible with strong oxidizing agents.
Hazardous Decomposition Products
- Carbon dioxide, carbon monoxide

Disposal considerations

Waste Treatment Methods
- Dispose of contents/container in accordance with local/regional/national/international regulations.