Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 701-052-3 | CAS number: 146987-98-6
Guidance on Safe Use
Administrative data
First-aid measures
General advice : Change soaked clothing
After inhalation : Ensure supply of fresh air.
In the event of symptoms seek medical advice.
After contact with skin : After skin contact wash off immediately with 1 % acetic acid solution, then clean thoroughly with soap and water. Consult a doctor if skin irritation persists.
After contact with eyes : In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice
After ingestion : Take medical treatment.
Fire-fighting measures
Suitable extinguishing media : foam, carbon dioxide, dry powder, water spray.
Extinguishing media which must not be used for safety reasons: Full water jet
Special hazards from the substance itself, its combustion products or from its vapours: In the event of fire the following can be released:
- carbon dioxide, carbon monoxide
- Nitrogen oxides (NOx)
Under certain conditions of combustion traces of other toxic substances cannot be excluded
Special protective equipment for firefighters: Do not inhale explosion and/or combustion gases
Use self-contained breathing apparatus and wear protective suit
Further information : Collect contaminated firefighting water separately, must not be discharged into the drains.
Accidental release measures
Personal precautions : Use personal protective equipment.
Environmental precautions : Do not allow to enter drains or waterways
Do not discharge into the subsoil/soil.
Methods for cleaning up/taking up: Take up with absorbent material (eg sand, kieselguhr, universal binder)
Dispose of absorbed material in accordance with the regulations.
Handling and storage
Handling
Advice on safe handling : Provide good ventilation of working area (local exhaust ventilation if necessary).
Advice on protection against fire and explosion: No special measures required.
Storage
Further information : Keep container tightly closed in a well-ventilated place
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Personal protection equipment
General protective measures : Avoid contact with eyes
Do not inhale gases/vapours/aerosols.
Hygiene measures : At work do not eat, drink, smoke or take drugs.
Wash hands before breaks and after work.
Remove soiled or soaked clothing immediately.
Respiratory protection : in case of formation of vapours/aerosols:
Short term: filter apparatus, combination filter A-P2
Hand protection : Examples of suitable gloves are those made by the company Kächele-Cama Latex GmbH, Am Kreuzacker 9, D-36124 Eichenzell, e-mail vertrieb@kcl.de, with subsequent specification (test according to EN374); specific workplace conditions must be separately taken into account.
gloves made of natural latex
Minimum break-through time of the glove: > 480 min
Glove strength: 1 mm
gloves made of natural latex
Minimum break-through time of the glove: > 480 min
Glove strength: 0,5 mm
gloves made of chloroprene (CR, e.g. Neoprene)
Minimum break-through time of the glove: > 480 min
Glove strength: 0,6 mm
gloves made of nitril (NBR)
Minimum break-through time of the glove: > 480 min
Glove strength: 0,4 mm
gloves made of nitril (NBR)
Minimum break-through time of the glove: > 480 min
Glove strength: 0,1 mm
protective gloves made of fluorinated rubber (FKM, e.g. Viton)
Minimum break-through time of the glove: > 480 min
Glove strength: 0,7 mm
gloves made of butyl
Minimum break-through time of the glove: > 480 min
Glove strength: 0,3 mm
Eye protection : goggles with side pieces
Skin and body protection : light protective clothing
Stability and reactivity
Thermal decomposition : Not measured
Hazardous reactions : No hazardous reactions with proper storage and handling.
Hazardous decomposition products: None with proper storage and handling.
Disposal considerations
Product : In accordance with local authority regulations, take to special waste incineration plant
Contaminated packaging : If empty contaminated containers are recycled or disposed of, the receiver must be informed about possible hazards.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
