Registration Dossier

Administrative data

First-aid measures

Description of necessary first-aid measures
General advice : Show this safety data sheet to the doctor in attendance.
First aider needs to protect himself.
Place affected clothing in a sealed bag for subsequent decontamination.
Plan first aid action before beginning work with this product.

Inhalation : Move to fresh air.
Keep at rest.
Consult a physician if necessary.

Skin contact : Take off contaminated clothing and shoes immediately.
Wash off with plenty of water.
Wash immediately and thoroughly for a prolonged period (at least 15 minutes). Consult a physician if necessary.

Eye contact : Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Get immediate medical advice/ attention.

Ingestion : Do NOT induce vomiting.
Do not give anything to drink.
Consult a physician if necessary.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media : Water spray
Foam
Carbon dioxide (CO2)
Unsuitable extinguishing media : High volume water jet

Special hazards arising from the substance or mixture
Specific hazards during firefighting : Risk of dust explosion.
On combustion, toxic gases are released.

Advice for firefighters
Special protective equipment for firefighters : In the event of fire, wear self-contained breathing apparatus.
Personal protective equipment comprising: suitable protective gloves, safety goggles and protective clothing
Further information : Collect contaminated fire extinguishing water separately. This must not be discharged into drains.

Accidental release measures

Personal precautions, protective equipment and emergency procedures: Remove all sources of ignition.
Do not breathe dust.
Avoid contact with the skin and the eyes.
Personal protective equipment
Wear suitable protective clothing.
Respirator with a particle filter (EN 143)
Tightly fitting safety goggles
Wear suitable gloves.
Stop leak if safe to do so.
Only qualified personnel equipped with suitable protective equipment may intervene

Environmental precautions : Dam up.
Do not let product enter drains.

Methods for Cleaning or Taking Up
Prohibition : As far as possible, do NOT spray packaging which has been damaged or overturned with water.

Recovery : Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations.
Keep in suitable, closed containers for disposal.

Decontamination/cleaning : Wash off with plenty of water.
Recover the cleaning water for subsequent disposal.

Disposal :Dispose of contents/ container to an approved waste disposal plant.
Additional advice : Forms slippery/greasy layers with water.

Handling and storage

Handling
Technical measures : Provide sufficient air exchange and/or exhaust in work rooms.
Provide adequate ventilation
Earth the equipment.

Advice on safe handling and usage : Prevent the build-up of electrostatic charge.
Avoid dust formation.
Keep away from fire, sparks and heated surfaces.
Routine housekeeping should be instituted to ensure that dusts do not accumulate on surfaces.
Handle in accordance with good industrial hygiene and safety practice.

Storage
Technical Measures for storage : Take all necessary measures to avoid accidental discharge of products into drains and waterways due to the rupture of containers or transfer systems.

Storage conditions
Recommended : Stable under normal conditions.
Keep in a well-ventilated place.
Protect from moisture.
Keep away from open flames, hot surfaces and sources of ignition.
Keep away from incompatible materials to be indicated by the manufacturer
Store in original container.

Incompatible products : Do not mix with incompatible materials.
Strong acids
Strong oxidizing agents
Strong reducing agents.

Packaging Measures
Packaging materials - Recommended : Plastic materials. Water-resistant materials.

Transport information

Land transport (ADR/RID)

UN number:
Not restricted
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not restricted
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not restricted
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not restricted
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control measures
Engineering measures :Effective exhaust ventilation system
Extract at emission point.
Facilities and equipment easily cleanable

Personal protective equipment
Respiratory protection : In case of liberation of fibres or dust : Respirator with a particle filter (EN 143)

Hand protection : Where there is a risk of contact with hands, use appropriate gloves
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time.
Gloves must be inspected prior to use. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.

Eye protection : Tightly fitting safety goggles

Skin and body protection : Wear suitable protective clothing, gloves and eye/face protection.
Choose body protection according to the amount and concentration of the dangerous substance at the work place.

Hygiene measures : Emergency equipment immediately accessible, with instructions for use.
Ensure that eyewash stations and safety showers are close to the workstation location.
Use clean, well-maintained personal protection equipment.
When using do not eat, drink or smoke.
Wash hands before breaks and at the end of workday.
Regular cleaning of equipment, work area and clothing.

Protective measures : The protective equipment must be selected in accordance with current CEN standards and in cooperation with the supplier of the protective equipment.
Selection of appropriate personal protective equipment should be based on an evaluation of the performance characteristics of the protective equipment
relative to the task(s) to be performed, conditions present, duration of use, and the potential hazards and/or risks that may occur during use.

General advice : Dam up.
Do not let product enter drains.

Stability and reactivity

Chemical stability : Stable under normal conditions.
Hazardous reactions
Materials to avoid : Strong acids
Strong oxidizing agents
Strong reducing agents.

Decomposition products : On combustion or on thermal decomposition (pyrolysis) releases:
Sulphur oxides
(Carbon oxides (CO + CO2)).

Disposal considerations

Product Disposal
Prohibition : Should not be released into the environment.
Advice on Disposal : Dispose of in accordance with local regulations.

Advice on cleaning and disposal of packaging
Measures for waste avoidance. : Do not dispose of the product at a rubbish tip.
Advice : Empty the packaging completely prior to disposal
Reason for waste disposal : Dispose of contents/ container to an approved waste disposal plant.
Other data : Dispose of in accordance with local regulations.