Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

General instructions : move away from the danger zone

If inhaled : Supply fresh air and to be sure call for a doctor.

After skin contact: Immediately wash with water and soap and rinse thoroughly. Remove contaminated clothing. If skin irritation continues, consult a doctor.

After eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

After swallowing: Never give anything by mouth to an unconscious person. Rinse the mouth with water. Do not induce vomiting. Seek immediate medical advice.

Fire-fighting measures

Extinguishing media

Suitable extinguishing agents:

CO2, sand, extinguishing powder. Do not use water.

Use fire extinguishing methods suitable to surrounding conditions.

For safety reasons unsuitable extinguishing agents:

Water with full jet

Advice for firefighters

Protective equipment:

Do not inhale explosion gases or combustion gases.

Additional information

Cool endangered receptacles with water spray.

Accidental release measures

Personal precautions, protective equipment and emergency procedures :

Keep away from ignition sources. Ensure adequate ventilation of the workplace.

Environmental precautions:

Do not allow product to reach sewage system or any water course.

Methods and material for containment and cleaning up:

absorb spill with an absorbent material (eg sand or soil)

Handling and storage

Handling:

• Precautions for safe handling :

Store in cool, dry place in tightly closed receptacles.

Keep away from heat and direct sunlight.

Ensure good ventilation/exhaustion at the workplace.

• Information about fire - and explosion protection:

Keep ignition sources away - Do not smoke.

Protect against electrostatic charges.

Storage:

• Requirements to be met by storerooms and receptacles:

Store in a cool location.

• Further information about storage conditions:

Store in cool, dry conditions in well sealed receptacles.

Protect from heat and direct sunlight.

Store receptacle in a well ventilated area.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN1272
Shippingopen allclose all
Labels:
3 (F1) Flammable liquids
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
UN1272
Shippingopen allclose all
Labels:
3 Flammable liquids
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
UN1272
Shipping information
Proper shipping name and description:
UN 1272 PINE OIL, 3, III, ENVIRONMENTALLY HAZARDOUS
Chemical name:
PINE OIL
Labels:
3 Flammable liquids
Marine pollutant
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN1272
Shipping information
Proper shipping name and description:
UN 1272 PINE OIL, 3, III, ENVIRONMENTALLY HAZARDOUS
Chemical name:
PINE OIL
Labels:
3 Flammable liquids
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls :

• Personal protective equipment:

• General protective and hygienic measures:

Keep away from foodstuffs, beverages and feed.

Avoid contact with the eyes.

• Respiratory protection: Use suitable respiratory protective device in case of insufficient

ventilation.

• Protection of hands: Protective gloves The glove material has to be impermeable and resistant

to the product/ the substance/ the preparation. Due to missing tests no recommendation to

the glove material can be given for the product/ the preparation/ the chemical mixture.

Selection of the glove material on consideration of the penetration times, rates of diffusion and

the degradation

• Material of gloves

The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and

varies from manufacturer to manufacturer.

• Penetration time of glove material

The exact break through time has to be found out by the manufacturer of the protective gloves and has to be

observed.

• Eye protection: Safety glasses

Stability and reactivity

Reactivity

• Chemical stability

• Thermal decomposition / conditions to be avoided:

Not determined.

• Possibility of hazardous reactions

No dangerous reactions known.

• Conditions to avoid

No further relevant information available.

• Hazardous decomposition products:

Not determined.

Disposal considerations

Waste treatment methods

• Recommendation

Must be specially treated adhering to official regulations.

• Uncleaned packaging:

• Recommendation:

Disposal must be made according to official regulations.