Registration Dossier

Administrative data

First-aid measures

Emergency Measure - Inhalation: - Move person to fresh air. (Treat symptomatically).
Emergency Measure - Eyes: - Flush with water for 15 minutes. If necessary, consult a doctor.
Emergency Measure - Skin: - Wash with soap and water.
Emergency Measure - Ingestion is not considered a potential route of exposure. However, if this happens, rinse mouth with water, do not induce vomiting and seek immediate medical attention. (Treat symptomatically).

Fire-fighting measures

Recommended extinguishing agent: - Water, CO2, dry powder.
Unsuitable extingushing agents: None specified.
Product Arising from burning: - The substance is combustible and will burn if involved in a fire, evolving noxious fumes including oxides of carbon and nitrogen.
Product determined by test: No

Protective equipment:
Full protective clothing and self-contained breathing apparatus pressure-demand MSHA/NIOSH (approved or equivalent) must be worn.
Fight the fire from a safe distance or protected location.
Avoid breathing smoke, fumes and decomposition products.

Accidental release measures

Emergency measures in case of spillage:
Evacuate personnel from immediate vicinity.
Wear appropriate personal protective equipment conforming to the relevant national or international standards.
Avoid dust formation. Sweep up powder or absorb spillages of solutions with a suitable inert material (eg. sand or soil). Carefully transfer the spillage to waste containers, or use a sealed industrial vacuum machine. Containers filled with waste material must be labelled in the same way as the original substance containers.
Dispose of waste material in accordance with local regulations by incineration

Handling and storage


The substance should be stored, handled and used under conditions of good industrial hygiene and in conformity with any local regulations in order to avoid exposure.
Avoid prolonged contact with skin or eyes. Do not handle in a manner that creates excessive dust. Provide appropriate ventilation and secure container after each use.
Engineering controls are necessary to reduce exposure to the substance.
When exposure cannot be prevented or adequately controlled appropriate personal protective equipment should be worn. Such protective equipment should conform to the appropriate international or national standards as follows;
*Chemical protective gloves to Standard EN374
*Chemical protective clothing to Standard EN368
*Eye protection to Standard EN166.
Furthermore, when respiratory protective equipment has to be used, it must be capable of adequately controlling exposure, be suitable for the purpose, and conform to the appropriate international or national standards, such as a dust mask conforming to EN149 FFP1.
These measures should be regarded as minimum.

Should be stored at room temperature in a dry, well ventillated area. Container should be closed after use.
Avoid extreme temperatures and direct sunlight.

Transport information

Land transport (ADR/RID)

UN number:
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Transport: - No special precautions.

- Avoid higher temperatures, higher humidity

air and direct sunlight.

- Avoid spreading the substance accidentally in

taking all necessary precautions.

Stability and Reactivity
Danger other than fire: - No known reaction.

Chemical reaction with water: - No known reaction.

Dust explosion: Possible.

Dust explosion determined by test: N
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Handle in the presence of adequate ventilation and avoid production of dust. It is advised that contact is avoided with skin and eyes; gloves and goggles are recommended. Avoid release to drains and surface waters.

Stability and reactivity

Danger other than fire: Material is not known to be reactive towards water or other solvents.
Chemical reaction with water: None which is hazardous.
Dust explosion: Under normal conditions of use this material does not present a significant explosion hazard. However, as with most organic powder samples, explosive mixtures can be formed with sufficient concentrations of dust combined with air.
Dust explosion determined by test: No

Disposal considerations

Industry - Possibility of recovery / recycling: - Under normal application, the substance is 100% fixed irreversibly to the polymer. It is not thought possible/appropriate to recycle the substance. Spillages should be recovered for disposal at an appropriate licensed incineration facility.

Industry - Possibility of neutralization: - No known method.

Industry - Possibility of destruction: controlled discharge: - Not recommended.

Industry - Possibility of destruction - incineration: The substance should be disposed of by incineration in a proper installation, Stack gases should be scrubbed..

Industry - Possibility of destruction - water purification: --- no data

Industry - Possibility of destruction - other: --- no data

Public at large - Possibility of recovery / recycling: - It is not possible to recover the substance after

use of finished products incorporating the substance.

Public at large - Possibility of neutralization: - Not applicable.

Public at large - Possibility of destruction: controlled discharge: - Not applicable.

Public at large - Possibility of destruction - incineration: - Not applicable.

Public at large - Possibility of destruction - water purification - Not applicable.

Public at large - Possibility of destruction - others: - Not applicable.