Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

General information

Remove/Take off immediately all contaminated clothing.

After inhalation

If inhaled, remove to fresh air.

Get medical advice/ attention.

After contact with skin

In case of contact, immediately flush skin with soap and plenty of water.

After contact with eyes

In the case of contact with eyes, rinse immediately with plenty of water and seek medical

advice.

After ingestion

If swallowed do not induce vomiting,seek medical advice and show safety datasheet or label

Treatment

Treat symptomatically.

Fire-fighting measures

Suitable extinguishing media

Water spray jet

Foam

Carbon dioxide (CO2)

Dry powder

Special hazards arising from the substance or mixture

In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO)

Carbon dioxide (CO2)

Advice for firefighters

Special protective equipment for firefighting

Self-contained breathing apparatus

Further information

Wear suitable protective equipment.

Accidental release measures

Personal precautions, protective equipment and emergency procedures

Wear suitable protective equipment.

Ensure adequate ventilation.

Environmental precautions

Do not allow to enter drains or waterways

Methods and material for containment and cleaning up

Take up mechanically. Dilute remainder with water and take up with absorbent material (eg

sawdust, sand, universal binder)

Handling and storage

Advice on safe handling

When used and handled appropriately no special measures are needed

Hygiene measures

Wash hands before breaks and at the end of workday.

Use protective skin cream before handling the product.

Take off immediately all contaminated clothing and wash it before reuse.

Advice on protection against fire and explosion

Observe the general rules of industrial fire protection

Further information on storage conditions

- sensitive to frost - In case of the product becoming opaque, thickening or being frozen due

to the effects of cold, allow to thaw slowly at room temperature. Stir briefly before use.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

General protective measures

Avoid contact with skin.

Avoid contact with eyes.

Hand protection :

Long-term exposure

Impervious butyl rubber gloves

Minimum breakthrough time / gloves : 480 min

Minimum thickness / gloves 0,7 mm

For short-term exposure (splash protection):

Nitrile rubber gloves.

Minimum breakthrough time / gloves : 30 min

Minimum thickness / gloves 0,4 mm

These types of protective gloves are offered by various

manufacturers. Please note the manufacturers´ detailed

statements, especially about the minimum thickness and the

minimum breakthrough time. Consider also the particular

working conditions under which the gloves are being used.

Eye protection : Depending on the risk, wear sufficient eye protection (safety

glasses with side protection or goggles, and if necessary, face

shield.)

Stability and reactivity

Stable under normal conditions.

No dangerous reaction known under conditions of normal use.

When handled and stored appropriately, no dangerous decomposition products are known

Disposal considerations

Product

In accordance with local authority regulations, take to special waste incineration plant

Uncleaned packaging

Packaging that cannot be cleaned should be disposed of as product waste