Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 201-398-0 | CAS number: 82-16-6
Explosiveness
Administrative data
Link to relevant study record(s)
- Endpoint:
- explosive properties of explosives
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2018
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- UN Manual of Tests and Criteria: Part I: Classification procedures, test methods and criteria relating to explosives of Class 1
- Version / remarks:
- Appendix 6, point 3 ‘Screening procedures for substances which may have explosive properties’ of UN-MTC
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Other quality assurance:
- ISO/IEC 17025 (General requirements for the competence of testing and calibration laboratories)
- Key result
- Parameter:
- other: decomposition energy
- Remarks on result:
- other: No sufficient heat release detected to indicate explosive properties up to 500 °C
- Remarks:
- Energy (J/g): -190
- Interpretation of results:
- GHS criteria not met
- Conclusions:
- No sufficient heat release has been detected to indicate explosive properties up to 500 °C. Therfore Solvent violet 36 can be classified as not explosive. Testing according to UN-MTC*) procedure is not necessary.
- Executive summary:
A screening DTA (based on DIN 51007) was made in order to rule out a decomposition of Solvent violet 36. A sample of the test item in a sealed glass ampoule was heated up in a DTA oven with a linear rate of 3 K/min up to 500 °C. A sample of aluminum oxide was heated in the same oven as comparison. The temperature difference of both sample were recorded electronically. From these differences the heat flow of transformation of the test item was calculated electronically. The result was plotted as time/heat-flow diagram. Integration gives the heat release of the transformation. The test was made twice. No sufficient heat release has been detected to indicate explosive properties up to 500 °C. Therfore Solvent violet 36 can be classified as not explosive. Testing according to UN-MTC*) procedure is not necessary.
Reference
No sufficient heat release has been detected to indicate explosive properties up to 500 °C. Testing according to UN-MTC*) procedure is not necessary.
Description of key information
No sufficient heat release has been detected to indicate explosive properties up to 500 °C.
Key value for chemical safety assessment
- Explosiveness:
- non explosive
Additional information
Solvent Violet 36 can be classified as not explosive. Testing according to UN-MTC*) procedure is not necessary.
Justification for classification or non-classification
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
