Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Flammability

Currently viewing:

Administrative data

Link to relevant study record(s)

Referenceopen allclose all

Endpoint:
flammable gases
Remarks:
Determination of explosion limits of vapours
Type of information:
experimental study
Adequacy of study:
key study
Study period:
2020
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to guideline
Guideline:
EN 1839, Method B (Determination of explosion limits of gases and vapours)
Version / remarks:
Version 5.0 (2017)
Deviations:
not specified
GLP compliance:
no
Other quality assurance:
ISO/IEC 17025 (General requirements for the competence of testing and calibration laboratories)
Specific details on test material used for the study:
- Batch number of test material: Batch No. 0318SR
- Expiration date of the lot/batch: April 2025
Key result
Parameter:
lower explosion limit
Value:
> 0.6 - < 0.8 vol%
Parameter:
upper explosion limit
Remarks on result:
not determinable
Remarks:
The vapour pressure of the test item prevented to achieve concentrations higher than 2.8 Vol% in the test conditions.

1,6-divinylfluorohexane showed flammability in the concentrations range from 0.6 Vol% to 2.8 Vol%.

The lower explosion limit (LEL) is therefore between 0.6 and 0.8 Vol% but the upper explosion limit (UEL) could not be determined because of the limited partial pressure of the test item under the test conditions which prevented to achieve concentrations higher than 2.8 Vol%.

(At 65°C the partial pressure of 1,6 -divinylfluorohexane is about 28 mbar.)

Interpretation of results:
other: The substance may form flammable/explosive vapour-air mixture.
Conclusions:
The lower explosion limit (LEL) of 1,6-divinylfluorohexane in air is between 0.6 and 0.8 Vol%.
The upper explosion limit (UEL) could not be determined.
1,6-divinylfluorohexane can therefore form flammable/explosive vapour-air mixture.
Executive summary:

The determination of the explosion limits of the 1,6 -divinylfluorohexane vapours in air was conducted according to the test method DIN EN 1839:2017. The work was accreditated under ISO 17025.

The test was conducted in a 5 L sphere at the temperature of approx. 65°C. The tests were carried out in air. A permanent spark with an ignition energy of approx. 10 Joule was used as ignition source.

According to the results of the test the lower explosion limit (LEL) is therefore between 0.6 and 0.8 Vol% but the upper explosion limit (UEL) could not be determined because of the limited partial pressure of the test item under the test conditions which prevented to achieve concentrations higher than 2.8 Vol%.

Based on the results of the test 1,6 -divinylfluorohexane can form a potentially explosive atmosphere in air.

Endpoint:
substances / mixtures which in contact with water emit flammable gases
Data waiving:
study scientifically not necessary / other information available
Justification for data waiving:
the study does not need to be conducted because the experience in production or handling shows that the substance does not react with water, e.g. the substance is manufactured with water or washed with water
Justification for type of information:
JUSTIFICATION FOR DATA WAIVING
According to section 2.9.1 of Annex I to CLP Regulation ‘‘Substances or mixtures which, in contact with water, emit flammable gases means solid or liquid substances or mixtures which, by interaction with water, are liable to become spontaneously flammable or to give off flammable gases in dangerous quantities.’’
According to the additional classification considerations in CLP Annex I, 2.12.4.1, the classification procedure for this class need not be applied if experience in handling and use shows that the substance or mixture does not react with water.
Pratical experience in handling 1,6-divinylfluorohexane both at the manufacturing site and at the testing facilities in the context of physico-chemistry, toxicological and acotoxicological GLP determinations confirms the lack of reactivity in contact with water. As a consequence, the classification procedure does not need to be applied and testing is not necessary.

Endpoint:
pyrophoric liquids
Data waiving:
study scientifically not necessary / other information available
Justification for data waiving:
the study does not need to be conducted because the substance is known to be stable in contact with air at room temperature for prolonged periods of time (days) and hence, the classification procedure does not need to be applied
Justification for type of information:
JUSTIFICATION FOR DATA WAIVING
According to section 2.9.1 of Annex I to CLP Regulation ‘Pyrophoric liquid means a liquid substance or mixture which, even in small quantities, is liable to ignite within five minutes after coming into contact with air.’
According to the additional classification considerations in CLP Annex I, 2.9.4, the classification procedure for pyrophoric liquids need not be applied when experience in manufacture or handling shows that the liquid does not ignite spontaneously on coming into contact with air at normal temperatures.
The molecular structure of the 1,6-divinylfluorohexane does not contain groups that indicate pyrophoric properties and practical experience in handling the substance both at the manufacturing site and at the testing facilities in the context of physico-chemistry, toxicological and acotoxicological GLP determinations confirms the lack of pyrophoricity. As a consequence, the classification procedure for pyrophoric liquids does not need to be applied and testing is not necessary.

Description of key information

The substance in its physical form of liquid is not flammable. Moreover it is not pyrophoric and it does not emit flammable gases in contact with water.

The mixture of its vapors and air may form a potentially flammable/explosive atmosphere.

Key value for chemical safety assessment

Flammability:
not classified

Additional information

Justification for classification or non-classification

The flammability of liquids is determined on basis of their flashpoint (in combination with their boiling point), their ability to emit flammable gases upon contact with water and their pyrophoricity.

Based on the flash point value > 60°C the substance is not classified as flammable liquid in EU regulation. 

Moreover the molecular structure of the test substance does not contain groups that indicate potential reactivity with water or pyrophoric properties and practical experience in handling the substance confirms the lack of pyrophoricity and flammability properties in contact with water. Based on this the substance has not to be classified either as "substances or mixtures which in contact with water emit flammable gases" or as "pyrophoric substance".

 

According to the Guidance on the Application of the CLP Criteria Version 5.0 – July 2017, for halogenated compounds which do not have flash point up to 60 °C the explosion limits of vapours in air need to be determined in order to decide whether labelling with EUH018, EUH209 or EUH209A need to be applied. The experimental determination on 1,6-divinyfluorohexane vapours showed that the lower explosion limit in air is ca 0.6-0.8% (no higher explosion limit could be determined because of limitations due to the vapor pressure of the substance) and therefore the substance needs to be considered able to form a potentially explosive atmosphere in air. EUH018 applies.