Reaction products of cuprate(4-), [C-(aminosulfonyl)-C-[[[2-[[4-chloro-6-[(2,5-disulfophenyl)amino]-1,3,5-triazin-2-yl]amino]ethyl]amino]sulfonyl]-29H,31H-phthalocyanine-C,C-disulfonato(6-)-N29,N30,N31,N32]-, tetrasodium and lithium chloride

Flammability

Link to relevant study record(s)

Reference

Endpoint:

flammable solids

Type of information:

experimental study

Adequacy of study:

key study

Study period:

From October 20, 2015 to October 23, 2015

Reliability:

2 (reliable with restrictions)

Rationale for reliability incl. deficiencies:

guideline study with acceptable restrictions

Qualifier:

according to guideline

Guideline:

EU Method A.10 (Flammability (Solids))

Test procedure:

burning rate test: preliminary screening test

Remarks on result:

substance does not ignite and propagate combustion either by burning with flame or smouldering along 200 mm of the powder train within the 2 minutes test period

In preliminary screening test, CJ303 does not ignite for a maximum 2 minutes.

Interpretation of results:

GHS criteria not met

Conclusions:

According to EU A.10 test method, CJ303 is not classified as flammable solids. Therefore, CJ303 was not met GHS criteria.

Executive summary:

The flammability properties of CJ303 was determined according to EC REGULATION No 440/2008 Annex A.10 Flammability (Solids). In preliminary screening test, the test result showed that CJ303 does not ignite for a maximum 2 minutes. Therefore, CJ303 is not classified as flammable solids.

Description of key information

CJ303 is not classified as flammable solids (EC A.10).

Key value for chemical safety assessment

Flammability:

non flammable

Additional information

In preliminary screening test, the test result showed that CJ303 does not ignite for a maximum 2 minutes. Therefore, CJ303 is not classified as flammable solids.