Registration Dossier

Physical & Chemical properties

Auto flammability

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
auto-flammability
Type of information:
experimental study
Adequacy of study:
key study
Study period:
Study Completion Date 05/11/2015
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to guideline
Guideline:
DIN 51794 (Testing of mineral oil hydrocarbons - Determination of ignition temperature)
Deviations:
no
Qualifier:
according to guideline
Guideline:
EU Method A.15 (Auto-Ignition Temperature (Liquids and Gases))
GLP compliance:
no
Specific details on test material used for the study:
Data of Test item as supplied by Huntsman Textile Effects
Identity: FAT 20036/G TE Lot. MH - 0033439900
Auto-ignition temperature:
> 550 °C
Atm. press.:
101.325 kPa
Conclusions:
No auto-ignition up to 550 °C was observed for FAT 20036/G TE.
Executive summary:

The determination of the auto-ignition temperature of the test item was performed in accordance with the EEC Directive Annex V of 67/548 Test A.15 auto-ignition temperature for liquids. In this study, the temperature of the oven and the sample were continuously recorded while the temperature of the oven was increased to approximately 550 °C at a rate of about 3- 5 °C/min. Then the test item is given drop by drop with pipette by cylinder hole into Erlenmeyer flask and observed for heat development. However, no auto-ignition was observed until 550 °C.

Description of key information

The determination of the auto-ignition temperature of the test item was performed in accordance with the EEC Directive Annex V of 67/548 Test A.15 auto-ignition temperature for liquids. In this study, the temperature of the oven and the sample were continuously recorded while the temperature of the oven was increased to approximately 550 °C at a rate of about 3- 5 °C/min. Then the test item is given drop by drop with pipette by cylinder hole into Erlenmeyer flask and observed for heat development. However, no auto-ignition was observed until 550 °C.

Key value for chemical safety assessment

Additional information