Registration Dossier

Administrative data

First-aid measures

General advice :If you feel unwell, seek medical advice (show the label where possible). Take off all contaminated clothing immediately.
Inhalation: Remove from exposure, lie down. If breathing is irregular or stopped, administer artificial respiration. Monitor breathing, give oxygen if necessary. Consult a physician.
Skin contact: Wash off with plenty of water.
Eye contact: Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
Ingestion: Consult a physician. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person.

Fire-fighting measures

Suitable extinguishing media: Water, Foam, Dry powder, Carbon dioxide (CO2)
Further information: Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Accidental release measures

Personal precautions Use personal protective equipment.
Environmental precautions Avoid subsoil penetration. Do not flush into surface water or sanitary sewer system.
Methods for cleaning up Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).

Handling and storage

HANDLING
Safe handling advice Wear personal protective equipment.
Advice on protection against fire and explosion No special protective measures against fire required.
STORAGE
Requirements for storage areas and containers No special storage conditions required.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all

Additional transport information

Additional transport information
No dangerous good

Exposure controls / personal protection

Respiratory protection: No personal respiratory protective equipment normally required. In inadequately ventilated areas, where workplace limits are exceeded, where unpleasant odours exist or where aerosols are in use, or smoke and mist occur, use self-contained breathing apparatus or breathing apparatus with a type A filter or appropriate combined filter (e.g. where aerosols are in use, or smoke and mist occur, A-P2 or ABEK-P2), in compliance with EN 141.
Hand protection: The choice of an appropriate glove does not only depend on its material but also on other quality features and is different from one producer to the other., Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time., Be aware that in daily use the durability of a chemical resistant protective glove can be notably shorter than the break through time measured according to EN 374, due to the numerous outside influences (e.g. temperature).

gloves suitable for permanent contact:
Material: butyl-rubber
Break through time: >= 480 min
Material thickness: >= 0.7 mm


gloves suitable for splash protection:
Material: Nitrile rubber/nitrile latex
Break through time: >= 30 min
Material thickness: >= 0.4 mm



Eye protection Tightly fitting safety goggles:
Skin and body protection Protective suit
Hygiene measures Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feedingstuffs.
Protective measures Avoid contact with eyes. Wear suitable gloves and eye/face protection.

ENVIRONMENTAL EXPOSURE CONTROLS:
General advice:
Avoid subsoil penetration. Do not flush into surface water or sanitary sewer system.

Stability and reactivity

Thermal decomposition: No decomposition if stored normally.

Disposal considerations

Product: Can be incinerated, when in compliance with local regulations.