Registration Dossier

Administrative data

First-aid measures

Description of first aid measures

General information
Seek medical assistance if discomfort continues

After inhalation
Remove the casualty into fresh air and keep him calm.

After contact with skin
In case of contact with skin, clean with soap and water.

After contact with eyes
Rinse the affected eye with plenty of water, at the same time keep the unaffected eye well protected.

After ingestion
If swallowed do not induce vomiting,seek medical advice and show safety datasheet or label


Most important symptoms and effects, both acute and delayed

Symptoms
No symptoms known currently.

Hazards
No hazards known at this time.


Indication of any immediate medical attention and special treatment needed

Treatment
Treat symptomatically.

Fire-fighting measures

Extinguishing media

Suitable extinguishing media
water spray jet
foam

Extinguishing media that must not be used for safety reasons
Full water jet
carbon dioxide
dry powder


Special hazards arising from the substance or mixture
In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO)
Carbon dioxide (CO2)
Nitrogen oxides (NOx)


Advice for firefighters
Special protective equipment for firefighting
Use self-contained breathing apparatus

Accidental release measures

Personal precautions, protective equipment and emergency procedures

Wear suitable personal protective equipment.


Environmental precautions
Do not allow entry to drains,water courses or soil


Methods and material for containment and cleaning up
Take up mechanically
Avoid dust formation and electrical charging (sparking) because dust explosion might occur.
When picked up, treat material as prescribed under heading "Disposal".

Handling and storage

Precautions for safe handling

Advice on safe handling
When used and handled appropriately no special measures are needed
Avoid dust formation.

Hygiene measures
Wash hands before breaks and after work.
Use barrier skin cream.
Remove soiled or soaked clothing immediately and clean thoroughly before using again.

Advice on protection against fire and explosion
Take precautionary measures against build-up of electrostatic charges, e.g earthing during loading and off-loading operations.
Keep away from sources of ignition
Dust can form an explosive mixture with air.

Dust explosion class
ST2 Capable of dust explosion


Conditions for safe storage, including any incompatibilities
Further information on storage conditions
Keep container dry


Specific end use(s)
No further recommendations.

Transport information

Land transport (ADR/RID)

UN number:
Not required since non-hazardous goods
Shippingopen allclose all
Class:
not restricted
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not required since non-hazardous goods
Shippingopen allclose all
Class:
not restricted
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not required since non-hazardous goods
Class:
not restricted
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not required since non-hazardous goods
Class:
not restricted
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls

General protective measures
Observe the usual precautions for handling chemicals.

Respiratory protection
Wear dust mask when handling large quantities

Hand protection
Nitrile rubber gloves.
Minimum breakthrough time (glove): not determined
Minimum thickness (glove): not determined
Observe the information of the glove manufacturers on permeability and breakthrough times and other workplace requirements
With solid dry substances permeation is not to be expected, therefore the breakthrough-time for this protective glove has not been measured.
Because this glove is used only for mechanical protection, the minimum breakthrough time and thickness are not relevant to safety.

Eye protection
safety glasses

Body protection
working clothes

Stability and reactivity

Reactivity
See section "Possibility of hazardous reactions"

Chemical stability
Stable.

Possibility of hazardous reactions
When handled and stored appropriately no dangerous reactions are known
Stable.

Conditions to avoid
None known.

Incompatible materials
not known

Hazardous decomposition products
When handled and stored appropriately, no dangerous decomposition products are known

Disposal considerations

Waste treatment methods

Product
Product should be be taken to a suitable and authorized waste disposal site in accordance with relevant regulations and if necessary after consultation with the waste disposal operator and/or the competent Authorities

Uncleaned packaging
Packaging that cannot be cleaned should be disposed of as product waste