Registration Dossier

Environmental fate & pathways

Biodegradation in water: screening tests

Currently viewing:

Administrative data

Link to relevant study record(s)

Referenceopen allclose all

Endpoint:
biodegradation in water: ready biodegradability
Type of information:
experimental study
Adequacy of study:
key study
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to
Guideline:
OECD Guideline 310 (Ready Biodegradability - CO2 in Sealed Vessels (Headspace Test)
Qualifier:
according to
Guideline:
other: ISO Guideline No 14593 (Water quality- Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium -Method by analysis of inorganic carbon in sealed vessels (CO2 headsoace test)
GLP compliance:
yes
Inoculum or test system:
activated sludge, domestic (adaptation not specified)
Details on inoculum:
- Source of inoculum/activated sludge (e.g. location, sampling depth, contamination history, procedure): Secondary treatment stage of the Severn Trent Water Plc sewage treatment plant at Loughborough, UK, which treats predominantly domestic sewage.

- Preparation of inoculum for exposure: Sample effluent filtered through coarse filter paper. Filtrate sparged with CO2-free air for approx. 1hr. Inoculum was allowed to settle for approx. 1 hr prior to removal of an aliquot of the supernatant for use in the test.
Duration of test (contact time):
60 d
Initial conc.:
740 mg/L
Based on:
test mat.
Parameter followed for biodegradation estimation:
CO2 evolution
Parameter followed for biodegradation estimation:
DOC removal
Details on study design:
TEST CONDITIONS
- Solubilising agent (type and concentration if used): Parent material dispersed directly in culture medium with aid of ultrasonication for approx 60 mins.

- Test temperature: 20 ± 1°C

- Continuous darkness: yes

TEST SYSTEM
- Culturing apparatus: 125 ml glass Wheaton bottles sealed using Teflon lined silicon speta and aliminium crimp caps, each containing 107 ml solution (headspace to liquid ration of 1:2.

- Number of culture flasks/concentration: 60 replicates test substance, 39 replicates reference substance, 60 replicates control, 15 replicates toxicity control

SAMPLING
- Sampling frequency: Determination of CO2 produced on days 0, 2, 7, 10, 14, 21, 28, 35, 42, 49, 60 (0, 2, 7, 10 and 14 for toxicity control). Measurement of DOC on days 0, 21, 35, 42, 49, 60.

- Sampling method: CO2: triplicate control, reference substance and test substance vessels were sacrificed on each sampling. DOC: duplicate vessels per sampling.


CONTROL AND BLANK SYSTEM
- Inoculum blank: Yes.

- Toxicity control: Yes
Reference substance:
benzoic acid, sodium salt
Parameter:
% degradation (CO2 evolution)
Value:
1
Sampling time:
28 d
Parameter:
% degradation (CO2 evolution)
Value:
0
Sampling time:
60 d
Parameter:
% degradation (DOC removal)
Value:
0
Sampling time:
60 d
Details on results:
Toxicity control attained 40% degradation after 14 days, confirming that test substance was not toxic to the microorganisms in the study.
Reference substance attained 85% degradation after 14d.

Table 1: Percent degradation values (CO2 determination)

Type of suspension

% degradation at sampling time (days)

0

2

7

10

14

21

28

35

42

49

60

 

Reference substance

-1

64

79

84

85

79

76

77

73

72

74

 

 

 

 

 

 

Test sample

0

0

0

0

2

1

1

0

0

-1

-1

 

 

 

 

 

 

Toxicity control

0

29

36

36

40

-

-

-

-

-

-

 

 

 

 

 

 

 

 

 

 

 

 

Validity criteria fulfilled:
yes
Interpretation of results:
under test conditions no biodegradation observed
Conclusions:
A biodegradation rate of 0% in 28d was determined in a reliable study conducted according to an appropriate test protocol, and in compliance with GLP. The result is considered reliable.
Endpoint:
biodegradation in water: ready biodegradability
Type of information:
read-across from supporting substance (structural analogue or surrogate)
Adequacy of study:
key study
Justification for type of information:
Please refer to the attached justification below and the overall justification for grouping of substances attached in IUCLID Section 13.
Reason / purpose:
read-across source
Parameter:
% degradation (CO2 evolution)
Value:
1
Sampling time:
28 d
Parameter:
% degradation (CO2 evolution)
Value:
0
Sampling time:
60 d
Parameter:
% degradation (DOC removal)
Value:
0
Sampling time:
60 d

Description of key information

Biodegradation in water (screening tests): 1% in 28 days (OECD 310)

Key value for chemical safety assessment

Additional information

There are no reliable ready biodegradation data available for triethoxy(phenyl)silane (CAS 780-69-8), therefore good quality data from the analogue substance, trichloro(phenyl)silane (98 -13 -5), have been read across. Both substances share the same silanol hydrolysis product, phenylsilanetriol. The other hydrolysis products are ethanol and HCl respectively. Details on read across justifications can be found in the attached justification in the respective target entry and in the overall justification for grouping of substances attached in IUCLID Section 13.

 

In the available study (2009) with the read across substance, 1% biodegradation was observed in 28 days. The study was conducted according to the OECD guideline 310. The non-silanol hydrolysis product ethanol is readily biodegradable based on the results of standard tests showing 76 – 82% and 95% removal after 5 and 20 days, respectively (OECD SIDS 2004).

Reference:

OECD (2004): SIDS Initial Assessment Report for SIAM 19, Berlin, Germany, 19-22 October 2004, Ethanol, CAS 64-17-5.