Registration Dossier

Administrative data

First-aid measures

- Inhalation:
Remove to fresh air. If not breathing, give artificial respiration. If breathing is found to be difficult, give oxygen. Get immediate medical attention.
- Skin contact: Wash with soap and water. Get medical attention if irritation develops or persists.
- Eye contact: First rinse with plenty of water for at least 15 minutes (remove contact lenses if possible), then take to a doctor.
- Ingestion: If swallowed, do not induce vomiting. Give victim a glass of water. Call a physician immediately. Never give anything by mouth to an unconscious person.

Fire-fighting measures

- Flammable properties: HMIS Flammability: 1, Flash point: 118.6 ℃ (101.3kPa)1)

- Suitable extinguishing media: Use powder, alcohol-resistant foam and carbon dioxide.

- NOT suitable extinguishing media: Not available

- Specific hazards with regard to fire-fighting measures: In case of the fire, this substance may liberate toxic gases. (CO etc.) Hazardous polymerization may occur if contaminated with heating, direct sunlight, iron, peroxides or acid.

- Specific methods of fire-fighting: Shut off fuel to fire and use extinguishing agents.
If the fire covers a wider area, apply water to cool and protect surrounding area. Fight fire from safe distance.

- Special equipment for the protection of firefighters: As in any fire, wear self-contained breathing apparatus with full face peace
operated in positive pressure mode and full protective gear.

Accidental release measures

- Personal precautions: Evacuate personnel from the leek. Evacuate non-essential personnel. Shut off all sources of ignition; No flares, smoking, or flames in the area. Wear proper protective equipment.
- Environmental precautions: Do not flush to sewer or waterways.
Cover with a sheet to prevent the odor from spreading.

- Absorb spill with inert material (e.g., dry sand or soil), then place in a waste disposal container. Wash away with plenty of water, and process the drainage appropriately (incineration, activated sludge treatment).

Handling and storage

When stored in a tank, keep the liquid temperature below 40℃ and the gas phase concentration of oxygen from 7 to 21 vol%. (In the presence of oxygen under 7 vol%, polymerization may occur.)

Ensure the tank and apparatus are grounded. Do not store in direct sunlight. Keep in well-ventilated areas. Keep away from heat and flame.

Transport information

Land transport (ADR/RID)

UN number:
Not classified as hazardous for transport by road or rail
Shippingopen allclose all
Class:
UN class: Not applicable
Classification code:
UN class: Not applicable
Packaging group:
Not applicable
Labels:
Not applicable
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not classified as hazardous for transport by inland waterway
Shippingopen allclose all
Class:
Not applicable
Classification code:
Not applicable
Packaging group:
Not applicable
Labels:
Not applicable
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not classified as hazardous for marine transport
Proper shipping name and description:
Not applicable
Chemical name:
Not applicable
Class:
Not applicable
Packaging group:
Not applicable
EmS code:
Not applicable
Labels:
Not applicable
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not classified as hazardous for transport by air
Proper shipping name and description:
Not applicable
Chemical name:
Not applicable
Class:
Not applicable
Packaging group:
Not applicable
Labels:
Not applicable
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Wear appropriate protective equipment.

Stability and reactivity

Hazardous polymerization may occur if contaminated with heating, direct sunlight, iron, peroxides or acid.

Disposal considerations

Absorb spill with inert material (e.g., dry sand or soil), then place in a waste disposal container. Wash away with plenty of water, and process the drainage appropriately (incineration, activated sludge treatment).