Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 482-100-8 | CAS number: -
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid measures
Inhalation: Remove exposed person to fresh air if adverse effects are observed.
Eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor/…
Skin Contact: Wash with soap and water. If skin irritation occurs, get medical attention.
Ingestion: Treat symptomatically. Get medical attention.
Most important symptoms and effects, both acute and delayed:
See section “Toxicological Information”.
Indication of any immediate medical attention and special treatment needed
Hazards: No data available.
Treatment: Treat symptomatically.
Inhalation: Remove exposed person to fresh air if adverse effects are observed.
Eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor/…
Skin Contact: Wash with soap and water. If skin irritation occurs, get medical attention.
Ingestion: Treat symptomatically. Get medical attention.
Most important symptoms and effects, both acute and delayed:
See section “Toxicological Information”.
Indication of any immediate medical attention and special treatment needed
Hazards: No data available.
Treatment: Treat symptomatically.
Fire-fighting measures
Firefighting measures
General Fire Hazards: No unusual fire or explosion hazards noted.
Extinguishing media
Suitable extinguishing media: Use water spray, dry chemical or foam for extinction. CO2 may be ineffective on large fires.
Unsuitable extinguishing media: Do not use water jet as an extinguisher, as this will spread the fire.
Special hazards arising from the substance or mixture: A solid stream of water will spread the burning material. Material creates a special hazard because it floats on water. See section 10 for additional information.
Advice for firefighters
Special firefighting procedures: No data available.
Special protective equipment for fire-fighters: Recommend wearing self-contained breathing apparatus.
General Fire Hazards: No unusual fire or explosion hazards noted.
Extinguishing media
Suitable extinguishing media: Use water spray, dry chemical or foam for extinction. CO2 may be ineffective on large fires.
Unsuitable extinguishing media: Do not use water jet as an extinguisher, as this will spread the fire.
Special hazards arising from the substance or mixture: A solid stream of water will spread the burning material. Material creates a special hazard because it floats on water. See section 10 for additional information.
Advice for firefighters
Special firefighting procedures: No data available.
Special protective equipment for fire-fighters: Recommend wearing self-contained breathing apparatus.
Accidental release measures
Accidental release measures
Personal precautions, protective equipment and emergency procedures:
Personal Protective Equipment must be worn, see Personal Protection Section for PPE recommendations. Ventilate area if spilled in confined space or other poorly ventilated areas.
Environmental Precautions:
Do not contaminate water sources or sewer. Prevent further leakage or spillage if safe to do so.
Methods and material for containment and cleaning up:
Pick up free solid for recycle and/or disposal. Stop the flow of material, if this is without risk. Prevent entry into waterways, sewer, basements or confined areas.
Reference to other sections:
See sections “Exposure Controls/Personal Protection” and “Disposal Considerations” for additional information.
Personal precautions, protective equipment and emergency procedures:
Personal Protective Equipment must be worn, see Personal Protection Section for PPE recommendations. Ventilate area if spilled in confined space or other poorly ventilated areas.
Environmental Precautions:
Do not contaminate water sources or sewer. Prevent further leakage or spillage if safe to do so.
Methods and material for containment and cleaning up:
Pick up free solid for recycle and/or disposal. Stop the flow of material, if this is without risk. Prevent entry into waterways, sewer, basements or confined areas.
Reference to other sections:
See sections “Exposure Controls/Personal Protection” and “Disposal Considerations” for additional information.
Handling and storage
Handling and storage:
Precautions for safe handling:
Do not get in eyes. Observe good industrial hygiene practices. Provide adequate ventilation. Wear appropriate personal protective equipment. Wash hands thoroughly after handling.
Maximum Handling Temperature: Not determined.
Conditions for safe storage, including any incompatibilities:
Store away from incompatible materials. See section 10 for incompatible materials.
Maximum Storage Temperature: Not determined.
Specific end use(s): End uses are listed in an attached exposure scenario when one is required.
Precautions for safe handling:
Do not get in eyes. Observe good industrial hygiene practices. Provide adequate ventilation. Wear appropriate personal protective equipment. Wash hands thoroughly after handling.
Maximum Handling Temperature: Not determined.
Conditions for safe storage, including any incompatibilities:
Store away from incompatible materials. See section 10 for incompatible materials.
Maximum Storage Temperature: Not determined.
Specific end use(s): End uses are listed in an attached exposure scenario when one is required.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Exposure controls/personal protection
Control Parameters
Occupational Exposure Limits
None of the components have assigned exposure limits.
Exposure controls
Appropriate engineering controls:
No special requirements under ordinary conditions of use and with adequate ventilation.
Individual protection measures, such as personal protective equipment
General information:
Provide easy access to water supply and eye wash facilities. Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.
Eye/face protection:
Safety glasses. If potential for splash or mist exists, wear chemical goggles or faceshield.
Skin protection
Hand Protection:
Suitable gloves can be recommended by the glove supplier. Use good industrial hygiene practices to avoid skin contact. If contact with the material may occur wear chemically protective gloves.
Other:
Long sleeve shirt is recommended.
Respiratory Protection:
A respiratory protection program compliant with all applicable regulations must be followed whenever workplace conditions require the use of a respirator. Use respirator with a dust/mist cartridge if the recommended exposure limit is exceeded.
Hygiene measures:
Observe good industrial hygiene practices. Do not get in eyes.
Environmental Controls:
No data available.
See section “Accidental Release Measures” for details.
Control Parameters
Occupational Exposure Limits
None of the components have assigned exposure limits.
Exposure controls
Appropriate engineering controls:
No special requirements under ordinary conditions of use and with adequate ventilation.
Individual protection measures, such as personal protective equipment
General information:
Provide easy access to water supply and eye wash facilities. Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.
Eye/face protection:
Safety glasses. If potential for splash or mist exists, wear chemical goggles or faceshield.
Skin protection
Hand Protection:
Suitable gloves can be recommended by the glove supplier. Use good industrial hygiene practices to avoid skin contact. If contact with the material may occur wear chemically protective gloves.
Other:
Long sleeve shirt is recommended.
Respiratory Protection:
A respiratory protection program compliant with all applicable regulations must be followed whenever workplace conditions require the use of a respirator. Use respirator with a dust/mist cartridge if the recommended exposure limit is exceeded.
Hygiene measures:
Observe good industrial hygiene practices. Do not get in eyes.
Environmental Controls:
No data available.
See section “Accidental Release Measures” for details.
Stability and reactivity
Stability and reactivity
Reactivity: No data available.
Chemical Stability: Material is stable under normal conditions.
Possibility of Hazardous Reactions: Will not occur.
Conditions to Avoid: Do not expose to excessive heat, ignition sources, or oxidizing materials.
Incompatible Materials: Strong oxidizing agents.
Hazardous Decomposition Products: Thermal decomposition or combustion may generate smoke, carbon monoxide, carbon dioxide, and other products of incomplete combustion.
Reactivity: No data available.
Chemical Stability: Material is stable under normal conditions.
Possibility of Hazardous Reactions: Will not occur.
Conditions to Avoid: Do not expose to excessive heat, ignition sources, or oxidizing materials.
Incompatible Materials: Strong oxidizing agents.
Hazardous Decomposition Products: Thermal decomposition or combustion may generate smoke, carbon monoxide, carbon dioxide, and other products of incomplete combustion.
Disposal considerations
Disposal considerations
Disposal methods:
Treatment, storage, transportation, and disposal must be in accordance with applicable Federal, State/Provincial, and Local regulations.
Dispose of packaging or containers in accordance with local, regional, national and international regulations. Empty container contains product residue which may exhibit hazards of product.
Contaminated Packaging:
Container packaging may exhibit hazards.
Disposal methods:
Treatment, storage, transportation, and disposal must be in accordance with applicable Federal, State/Provincial, and Local regulations.
Dispose of packaging or containers in accordance with local, regional, national and international regulations. Empty container contains product residue which may exhibit hazards of product.
Contaminated Packaging:
Container packaging may exhibit hazards.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
