Registration Dossier
Registration Dossier
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 203-090-1 | CAS number: 103-23-1
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data

Manufacture, use & exposure
Uses at industrial sites
Documentsopen allclose all
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use in closed batch process (synthesis or formulation)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in batch and other process (synthesis) where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Mixing or blending in batch processes for formulation of preparations and articles (multistage and/or significant contact)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Production of preparations or articles by tabletting, compression, extrusion, pelletisation
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 17: Hydraulic fluids
- PC 24: Lubricants, greases, release products
- Sector of end use:
- SU 0: Other: Industrial uses: Uses of substances as such or in preparations at industrial sites
- Substance supplied to that use in form of:
- as such
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of functional fluid at industrial site
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Lubrication at high energy conditions and in partly open process
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Name of activity / technique:
- Greasing at high energy conditions
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Product category used:
- PC 24: Lubricants, greases, release products
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Product category used:
- PC 14: Metal surface treatment products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 0: Other: SU 3 Industrial Manufacturing (all), SU 22 Public domain (administration, education, entertainment, services, craftsmen), SU 21 Private households (= general public = consumers)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 18: Ink and toners
- PC 32: Polymer preparations and compounds
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Product category used:
- PC 14: Metal surface treatment products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Product category used:
- PC 14: Metal surface treatment products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Product category used:
- PC 17: Hydraulic fluids
- PC 24: Lubricants, greases, release products
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 21: Laboratory chemicals
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Product category used:
- PC 14: Metal surface treatment products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 24: Lubricants, greases, release products
- Sector of end use:
- SU 0: Other: Industrial uses: Use of substances as such or in preparations at industrial sites
- Substance supplied to that use in form of:
- as such
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Product category used:
- PC 24: Lubricants, greases, release products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- ERC 5
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- PROC 1
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- PROC 2
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- PROC 3
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- PROC 4
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- PROC 5
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- PROC 7
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- PROC 8a
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- PROC 8b
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- PROC 10
- Process category (PROC):
- PROC 10: Roller application or brushing
- Sector of end use:
- SU 7: Printing and reproduction of recorded media
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Product category used:
- PC 24: Lubricants, greases, release products
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all), SU 22 Public domain (administration, education, entertainment, services, craftsmen), SU 21 Private households (= general public = consumers)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 10: Roller application or brushing
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 34: Textile dyes, and impregnating products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Product category used:
- PC 24: Lubricants, greases, release products
- PC 34: Textile dyes, and impregnating products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 6: Calendering operations
- Product category used:
- PC 34: Textile dyes, and impregnating products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workers
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Product category used:
- PC 17: Hydraulic fluids
- PC 24: Lubricants, greases, release products
- Sector of end use:
- SU 0: Other: Industrial uses: Uses of substances as such or in preparations at industrial sites
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Product category used:
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- Sector of end use:
- SU 0: Other: Industrial uses: Uses of substances as such or in preparations at industrial sites
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workers
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Product category used:
- PC 24: Lubricants, greases, release products
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Product category used:
- PC 14: Metal surface treatment products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 20: Use of functional fluids in small devices
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 10: Roller application or brushing
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Product category used:
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 0: Other: SU 3 Industrial Manufacturing (all), SU 22 Public domain (administration, education, entertainment, services, craftsmen), SU 21 Private households (= general public = consumers)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 16: Use of fuels
- Product category used:
- PC 13: Fuels
- Sector of end use:
- SU 0: Other: Industrial uses: Uses of substances as such or in preparations at industrial sites
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for workers
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 7: Industrial spraying
- Product category used:
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 24: Lubricants, greases, release products
- Sector of end use:
- SU 0: Other: Industrial use: Use of substances as such or in preparations at industrial sites
- Substance supplied to that use in form of:
- as such
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 6: Calendering operations
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Sector of end use:
- SU 0: Other: General industrial use of lubricants and greases in vehicles or machinery. Includes filling and draining of containers and enclosed machinery (including engines)
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 18: Ink and toners
- PC 24: Lubricants, greases, release products
- PC 32: Polymer preparations and compounds
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Product category used:
- PC 14: Metal surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all), SU 22 Public domain (administration, education, entertainment, services, craftsmen), SU 21 Private households (= general public = consumers)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 14: Metal surface treatment products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Sector of end use:
- SU 0: Other: General industrial use of lubricants and greases in vehicles or machinery. Includes filling and draining of containers and enclosed machinery (including engines)
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 7: Industrial spraying
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 18: Ink and toners
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 11: Manufacture of rubber products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 20: Health services
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 14: Metal surface treatment products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 17: Hydraulic fluids
- PC 24: Lubricants, greases, release products
- Sector of end use:
- SU 0: Other: Industrial uses: Uses of substances as such or in preparations at industrial sites
- Substance supplied to that use in form of:
- as such
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Product category used:
- PC 14: Metal surface treatment products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Product category used:
- PC 0: Other: PC 0 Other (use UCN codes: see last row)
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 0: Other: SU 3 Industrial Manufacturing (all), SU 22 Public domain (administration, education, entertainment, services, craftsmen), SU 21 Private households (= general public = consumers)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 0: Other: PC 0 Other (use UCN codes: see last row)
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 18: Ink and toners
- Sector of end use:
- SU 0: Other: industrial
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Regulatory status:
- use in Scientific Research and Development
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial Use (Environment)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC6a: Use of intermediate
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Industrial Use (Workers)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- Sector of end use:
- SU 9: Manufacture of fine chemicals
- SU 20: Health services
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 21: Laboratory chemicals
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Product category used:
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- Sector of end use:
- SU 0: Other: Industrial uses: Uses of substances as such or in preparations at industrial sites
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 7: Industrial spraying
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 11: Manufacture of rubber products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Product category used:
- PC 14: Metal surface treatment products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 7: Industrial spraying
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use in closed, continuous process with occasional controlled exposure
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in batch and other process (synthesis) where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Mixing or blending in batch processes for formulation of preparations and articles (multistage and/or significant contact)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Transfer of substance or preparation into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Product category used:
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- Sector of end use:
- SU 0: Other: Industrial uses: Uses of substances as such or in preparations at industrial sites
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Product category used:
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Product category used:
- PC 24: Lubricants, greases, release products
- Sector of end use:
- SU 0: Other: Industrial uses: Uses of substances as such or in preparations at industrial sites
- Substance supplied to that use in form of:
- as such
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- (Industrial) Use of lubricants and greases in open systems.
ATIEL-ATC Group C [i] - Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Manual filling of lubricant container, i.e. bath or tank
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Automated filling of lubricant container, i.e. bath or tank
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Automated filling of lubricant container, i.e. bath or tank
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Automated roller application or brushing of coatings
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Spraying onto equipment or article
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Draining, maintenance & cleaning of equipment
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Material storage
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Product category used:
- PC 24: Lubricants, greases, release products
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 0: Other: SU 3 Industrial Manufacturing (all), SU 22 Public domain (administration, education, entertainment, services, craftsmen), SU 21 Private households (= general public = consumers)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 18: Manufacture of furniture
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Product category used:
- PC 17: Hydraulic fluids
- PC 24: Lubricants, greases, release products
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 7: Printing and reproduction of recorded media
- SU 0: Other: SU3
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 18: Manufacture of furniture
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC6a: Use of intermediate
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 15: Use as laboratory reagent
- PROC 17: Lubrication at high energy conditions in metal working operations
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Product category used:
- PC 17: Hydraulic fluids
- PC 24: Lubricants, greases, release products
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 23: Leather treatment products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 7: Industrial spraying
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 7: Industrial spraying
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 34: Textile dyes, and impregnating products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 10: Roller application or brushing
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 18: Ink and toners
- Sector of end use:
- SU 0: Other: industrial
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Product category used:
- PC 14: Metal surface treatment products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for workers
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for workers
- Process category (PROC):
- PROC 0: Other: doesn't need to be considered, since the substance is not classified
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 7: Industrial spraying
- Product category used:
- PC 24: Lubricants, greases, release products
- Sector of end use:
- SU 0: Other: Industrial uses: Uses of substances as such or in preparations at industrial sites
- Substance supplied to that use in form of:
- as such
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 18: Manufacture of furniture
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Product category used:
- PC 17: Hydraulic fluids
- PC 24: Lubricants, greases, release products
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Product category used:
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions.
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment condition
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Calendering operations
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Use as laboratory reagent
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Low energy manipulation and handling of substances bound in/on materials or articles
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 11: Manufacture of rubber products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 7: Industrial spraying
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 7: Industrial spraying
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 11: Non industrial spraying
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 0: Other: SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 0: Other: PC 0 Other (use UCN codes: see last row)
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all), SU 22 Public domain (administration, education, entertainment, services, craftsmen), SU 21 Private households (= general public = consumers)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 20: Health services
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 10: Roller application or brushing
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 10: Roller application or brushing
- Product category used:
- PC 14: Metal surface treatment products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions.
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment condition
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Use as laboratory reagent
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Low energy manipulation and handling of substances bound in/on materials or articles
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 11: Manufacture of rubber products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 10: Roller application or brushing
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 34: Textile dyes, and impregnating products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 10: Roller application or brushing
- Product category used:
- PC 24: Lubricants, greases, release products
- Sector of end use:
- SU 0: Other: Industrial uses: Uses of substances as such or in preparations at industrial sites
- Substance supplied to that use in form of:
- as such
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 17/18
- Name:
- bis(2-ethylhexyl) adipate
- Type of composition:
- legal entity composition of the substance
- State / form:
- liquid
- Reference substance:
- bis(2-ethylhexyl) adipate
- Name of activity / technique:
- Plasticizer
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 7: Printing and reproduction of recorded media
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
Reference
Contributing activity / technique for workers
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 20: Health services
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Product category used:
- PC 14: Metal surface treatment products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Product category used:
- PC 14: Metal surface treatment products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 7: Industrial spraying
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipp