Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Emergency measure - Inhalation: Immediately bring to frish air. Consult a doctor.
Emergency measure - Eyes: Wash immediately with plenty of water for 15 minutes;
consult a doctor.
Emergency measure - Skin: Immediately remove contaminated clothing. Wash contaminated
areas with plenty of soap and water.
Emergency measure - Ingestion: If symptoms occur, consult a doctor immediately. Treat
symptomatically.

Fire-fighting measures

Recommended extinguishing agent: Dry powder, earth, sand, CO2, foam, water mist

Product arising from burning: H2O, CO2; in a low temperature fire, also CO and soot

Product determined by test: N

Protective equipment: Wear protective clothing and self-contained breathing
apparatus.

Accidental release measures

Emergency measures in case of spillage: Avoid breathing dust, if necessary wear breathing
protection. Avoid contact with eyes. When handling, wear
protective clothing, protective gloves and goggles. Before
collecting absorb onto sand or earth and immediatly sweep up
or, preferable, use an approved industrial vacuum cleaner.
Keep spilled material in a tightly closed container in a
safe place until disposal. Lable the container according to
the regulations. Avoid contamination of the floor. Do not
wash away with water. Ask appropriate authorities for
disposal.

Handling and storage

Handling: Avoid dusting during handling, charging, dicharging. Do not
recirculate exhausted air into the ambient air at the
workplace. Exhaust system should be operative (maximum
exhaust rate 0.8 m/sec.). Use closed systems, closed
charging, transferrring and batching equipment. Avoid
breathing dust: wear dust mask. Avoid skin contact: wear
protective clothing, including rubber or polyethylene apron.
Protect hands with rubber or polyethylene gauntlets. Wear
eye protection and chemical-resistent boots. Store work
clothes and personal protective equipment separately from
outdoor clothing. Molten material can react exothermically
with amines, Lewis acids, mercaptanes, phenols, organic
acids and acid unhydrides. In the solid stage, violent
reactions with strong acids and strong oxidizing agents are
possible.

Storage: Store only in undamaged, unbreakable and tightly closed
original containers. Avoid leaving residues on containers.
Lable correctly. Store only in cool and dry rooms with
ventilation or extraction. Keep away from naked flames and
high temperatures. Take precautions against static electric
charges. Store away food and food stuffs. Keep out of reach
of children.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport: Transport only in undamaged, unbreakable and tightly closed
original containers. Avoid leavig residues on containers.
Lable correctly. Secure against toppling over or sliding.
Remove residues on containers before transport. Do not
transport without accident emergency instruction sheet. Do
not transport with food or food stuff.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: In the stage (solid) in which the substance is placed on the
market it is neither flammable nor explosive. Only finely
ground particles as a dust cloud can ignite and lead to a
dust explosion.

Chemical reaction with water: No chemical reaction with water.

Disposal considerations

Industry - Possibility of recovery/recycling: No possibilities

Industry - Possibility of neutralisation: Neutralisation by special techniques (Mixing with a
hardener)

(634)

Industry - Possibility of destruction: controlled discharge: After a reaction with a hardener, the substance is very
stable and may therefore be disposed of as waste in a
controlled manner.

Industry - Possibility of destruction - incineration: In a modern waste incineration plant. During process
additional energy is obtained. The substance contains no
halogens.

Industry - Possibility of destruction - water purification: not applicable

Public at large - Possibility of recovery/recycling: Not applicable because substance is a component for the
production of resins, it will not reach public at large.