Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Inhalation:
Move exposed person to fresh air. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-tomouth resuscitation. Get medical attention if adverse health effects persist or are severe. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Ingestion:
Wash out mouth with water. Move exposed person to fresh air. Keep person warm and at rest. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting
unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention if adverse health effects persist or are severe. Never give anything by mouth to an unconscious person. If unconscious, place in recovery
position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Skin contact:
Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur. Wash clothing
before reuse. Clean shoes thoroughly before reuse.

Eye contact:
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to
rinse for at least 10 minutes. Get medical attention.

Fire-fighting measures

Extinguishing media
Suitable:
In case of fire, use water spray (fog), foam, dry chemical or CO2.
Not suitable_
None known.
Special exposure hazards:
No specific fire or explosion hazard.
Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal
risk or without suitable training.
Hazardous combustion products:
Decomposition products may include the following materials: carbon oxides
Special protective equipment for fire-fighters_
Fire-fighters should wear appropriate protective equipment and selfcontained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

Accidental release measures

Personal precautions:
No action shall be taken involving any personal risk or without suitable training. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilt material. Provide adequate ventilation. Put on appropriate personal protective equipment (see section 8).
Environmental precautions:
Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air).
Large spill:
Move containers from spill area. Prevent entry into sewers, water courses, basements or confined areas. Vacuum or sweep up material and place in a designated, labelled waste container. Dispose of via a licensed waste disposal contractor. Note: see section 1 for emergency contact information and section 13 for waste disposal.
Small spill:
Move containers from spill area. Vacuum or sweep up material and place in a designated, labelled waste container. Dispose of via a licensed waste
disposal contractor.

Handling and storage

Handling:
Put on appropriate personal protective equipment (see section 8). Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Do not ingest. Avoid contact with eyes,
skin and clothing. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use.
Empty containers retain product residue and can be hazardous.
Storage:
Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and wellventilated area, away from incompatible materials (see section 10) and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been
opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabelled containers. Use appropriate containment to avoid
environmental contamination.
Packing materials
Recommended:
Use original container.
Remarks:
Avoid the formation of dust, if necessary siphoning the product off locally. Fine powder forms flammable and explosive mixtures in air. Take
precautionary measures against electrostatic discharges.

Transport information

Land transport (UN RTDG/ADR/RID)

Shipping information
Chemical name:
Carboxylic acid, di-,C4-6
Language:
English
Labels:
Not dangerous cargo.
Has a slight odour.
Irritating to skin and eyes.
Risk of serious damage to eyes.
Keep separated from foodstuffs.
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure limit values:
Not available.
Recommended monitoring procedures:
If this product contains ingredients with exposure limits, personal, workplace atmosphere or biological monitoring may be required to determine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective equipment. Reference should be made to European Standard EN 689 for methods for the assessment of exposure by inhalation to chemical agents and national guidance documents for
methods for the determination of hazardous substances.

Risk management measures Occupational exposure controls
Technical measures:
If this product contains ingredients with exposure limits, use process enclosures, local exhaust ventilation or other engineering controls to keep
worker exposure below any recommended or statutory limits.

Personal protection measures
Respiratory protection:
Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary.
Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected
respirator.
Recommended: Dust-protection mask if there is a risk of dust formation.
Hand protection:
Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk
assessment indicates this is necessary. After contamination with product change the gloves immediately and dispose of them according to relevant national and local regulations <1 hours (breakthrough time): Polychloroprene - CR Butyl rubber - IIR , Nitrile rubber - NBR , Fluorinated rubber - FKM, Natural rubber - NR
Eye protection:
Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. Recommended: Tightly fitting safety goggles.
Skin protection:
Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
Hygiene measures:
Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the
working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing.
Ensure that eyewash stations and safety showers are close to the workstation location.

Environmental exposure controls
Technical measures:
Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to
acceptable levels.

Stability and reactivity

Stability: The product is stable.
Possibility of hazardous reactions: Under normal conditions of storage and use, hazardous reactions will not occur. Contact with strong oxidising
agents may cause hazardous reactions.
Conditions to avoid: In the case of dusty organic products the possibility of a dust explosion should always be considered. No hazardous reactions
when used as directed.
Materials to avoid: Keep away from the following materials to prevent strong exothermic reactions:water and alkalis.
Hazardous decomposition products: Under normal conditions of storage and use, hazardous decomposition products should not be produced.

Disposal considerations

Methods of disposal:
Examine possibilities for re-utilisation. Product residues and uncleaned empty containers should be packaged, sealed, labelled, and disposed of or
recycled according to relevant national and local regulations. Where large quantities are concerned, consult the supplier. When uncleaned empty
containers are passed on, the recipient must be warned of any possible hazard that may be caused by residues. For disposal within the EC, the
appropriate code according to the European Waste List (EWL) should be used. It is among the tasks of the polluter to assign the waste to waste
codes specific to industrial sectors and processes according to the European Waste List (EWL).
Hazardous waste:
The classification of the product may meet the criteria for a hazardous waste.