Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 203-614-9 | CAS number: 108-77-0
Hydrolysis
Administrative data
Link to relevant study record(s)
Description of key information
In a non guideline study the half-times for the first hydrolysis step of cyanuric chloride were determined to be
- DT50(pH 2.0, T=298.15 K = 1.2 min
- DT50 (pH 4.0, T=313.15 K)= 1.65 min
- DT50(pH 7.0, T= 298.15 K) = 3.47 min.
Measurements revealed a fast and stepwise hydrolysis of cyanuric chloride. The intermediate and final degradation products of cyanuric chloride were identified as 2,4-dichlor-6-hydroxy-1,3,5-triazine (first intermediate, DT50(pH 7.0, T=298.15 K = 0.52 h = 31.5 min), 2-chlor-4,6-dihydroxy-1,3,5-triazine (also named 6-chloro-1,3,5-triazine-2,4(1H,3H)-dione, sodium salt) (second intermediate, CAS no.: 32998-00-8, DT50 (pH 7.0, T=298.15 K)= 3.98 h =239.0 min ) and cyanuric acid (final degradation product, CAS no: 108 -80-5), respectively.
The rates of hydrolysis rise significantly for all three steps at acidic medium and are slower at basic pH (for T = constant).
The activation energy is idependent from pH and equal for the three hydrolysis steps.
Key value for chemical safety assessment
- Half-life for hydrolysis:
- 3.47 min
- at the temperature of:
- 298.15 K
Additional information
Key study:
Measurements revealed a fast and stepwise hydrolysis of cyanuric chloride. The intermediate and final degradation products of cyanuric chloride were identified as 2,4-dichlor-6-hydroxy-1,3,5-triazine (first intermediate, DT50(pH 7.0, T=298.15 K = 0.52 h = 31.5 min), 2-chlor-4,6-dihydroxy-1,3,5-triazine (also named 6-chloro-1,3,5-triazine-2,4(1H,3H)-dione, sodium salt) (second intermediate, CAS no.: 32998-00-8, DT50 (pH 7.0, T=298.15 K)= 3.98 h =239.0 min ) and cyanuric acid (final degradation product, CAS no: 108 -80-5), respectively.
In this study the half-times for the first hydrolysis step of cyanuric chloride were determined to be
- DT50(pH 2.0, T=298.15 K = 1.2 min
- DT50 (pH 4.0, T=313.15 K)= 1.65 min
- DT50(pH 7.0, T= 298.15 K) = 3.47 min.
The rates of hydrolysis rise significantly for all three steps at acidic medium and are slower at basic pH (for T = constant).
The activation energy is idependent from pH and equal for the three hydrolysis steps.
The half-life (pH 7, 298.15 K) of the first hydrolysis step (decay of cyanuric chloride to first intermediate) was used as value for the key parameter.
Supporting studies:
- The hydrolysis of cyanuric chloride in acid, neutral and alkaline solution was studied. Due to the stepwise process of the hydrolysis of cyanuric chloride, different (intermediate) degradation products have been identified. Furthermore, the rate constants (DT50) of the hydrolysis step in the temperature range 0-25 °C were determined to be in the range 4-50 minutes.
- In a study the hydrolysis of cyanuric chloride was investigated. Cyanuric chloride completely hydrolyzed (1 g/L at 20 ± 2 °C) within 2 hours.
- In an additional study it could be shown that cyanuric chloride hydrolyses fast. This result is in line with the findings reported in the key study.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
