Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

4.1       Description of first aid measures

General information

Change contaminated, saturated clothing. In case of persisting adverse effects, consult a physician.

After inhalation

Ensure supply of fresh air. In case of persisting adverse effects consult a physician.

After skin contact

When in contact with the skin, clean with soap and water. Consult a doctor if skin irritation persists.

After eye contact

In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. Seek medical assistance.

After ingestion

Call a doctor. Do not induce vomiting. Rinse mouth thoroughly with water. Never give anything by mouth to an unconscious person.

4.2       Most important symptoms and effects, both acute and delayed

No data available.

4.3       Indication of any immediate medical attention and special treatment needed

No data available.

Fire-fighting measures

5.1       Extinguishing media

Suitable extinguishing media

Foam; Carbon dioxide; Dry chemical extinguisher; Water

Unsuitable extinguishing media

No data available.

5.2       Special hazards arising from the substance or mixture

In case of fires, hazardous combustion gases are formed: Carbon dioxide (CO2); Carbon monoxide (CO); Combustion products of this material have to be classed invariably as respiratory poison.

5.3       Advice for firefighters

Use self-contained breathing apparatus. Wear protective clothing.

Accidental release measures

6.1       Personal precautions, protective equipment and emergency procedures

For non-emergency personnel

Refer to protective measures listed in sections 7 and 8.

For emergency responders

No data available. Personal protective equipment (PPE) - see Section 8.

6.2       Environmental precautions

Do not discharge into the drains/surface waters/groundwater.

6.3       Methods and material for containment and cleaning up

Pick up with absorbent material (e.g., sand). When picked up, treat material as prescribed under heading "Disposal considerations".

6.4       Reference to other sections

No data available.

Handling and storage

7.1       Precautions for safe handling

Advice on safe handling

Observe the usual precautions for handling chemicals. Provide good ventilation of working area (local exhaust ventilation, if necessary). Avoid eye, skin and clothing contact. Do not breathe steams or mist of the product.

General protective and hygiene measures

Observe the usual precautions when handling chemicals. Do not eat, drink or smoke during work time. After worktime and during work intervals the affected skin areas must be thoroughly cleaned. Avoid contact with eyes and skin. Do not inhale vapours.

Advice on protection against fire and explosion

Take precautionary measures against static charges. Keep away from sources of heat and ignition.

7.2       Conditions for safe storage, including any incompatibilities

Technical measures and storage conditions

Keep container tightly closed in a cool, well-ventilated place.

Requirements for storage rooms and vessels

Keep only in the original container. Containers which are opened must be carefully closed and kept upright to prevent leakage.

Advice on storage assembly

Do not store together with: Bases; Oxidizing agents

7.3       Specific end use(s)

No data available.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

8.1       Control parameters

No parameters available for monitoring.

8.2       Exposure controls

Appropriate engineering controls

No data available.

Personal protective equipment

Respiratory protection

If workplace exposure limits are exceeded, a respiration protection approved for this particular job must be worn. In case of aerosol and mist formation, take appropriate measures for breathing protection  in the event workplace threshold values are not specified.

Eye / face protection

Safety glasses with side protection shield (EN 166)

Hand protection

Sufficient protection is given wearing suitable protective gloves checked according to i.e. EN 374, in the event of risk of skin contact with the product . Before use, the protective gloves should be tested in any case for its specific work-station suitability (i.e. mechanical resistance, product compatibility and antistatic properties). Adhere to the manufacturer’s instructions and information relating to the use, storage, care and replacement of protective gloves. Protective gloves shall be replaced immediately when physically damaged or worn. Design operations thus to avoid permanent use of protective gloves.

Other

Normal chemical work clothing.

Environmental exposure controls

No data available.

Stability and reactivity

10.1       Reactivity

No data available.

10.2       Chemical stability

No data available.

10.3       Possibility of hazardous reactions

No data available.

10.4       Conditions to avoid

Heat; Moisture

10.5       Incompatible materials

strong oxidizing agents; strong bases

10.6       Hazardous decomposition products

See section 5 for burning risks

Disposal considerations

13.1       Waste treatment methods

Product

Allocation of a waste code number, according to the European Waste Catalogue, should be carried out in agreement with the regional waste disposal company.

Packaging

Residuals must be removed from packaging and when emptied completely disposed of in accordance with the regulations for waste removal. Incompletely emptied packaging must be disposed of in the form of disposal specified by the regional disposer.