Registration Dossier

Manufacture, use & exposure

Uses at industrial sites

Documentsopen allclose all

Uses at industrial sites

Contributing activity / technique for the environmentopen allclose all
Environmental release category (ERC):
ERC2: Formulation into mixture
Environmental release category (ERC):
ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Process category (PROC):
PROC 15: Use as laboratory reagent
Product category used:
PC 32: Polymer preparations and compounds
Sector of end use:
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
Substance supplied to that use in form of:
as such
Subsequent service life relevant for this use:
no

Uses at industrial sites

Registration/ Notification status for the use:
use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
Environmental release category (ERC):
ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Process category (PROC):
PROC 15: Use as laboratory reagent
Product category used:
PC 32: Polymer preparations and compounds
Sector of end use:
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
Substance supplied to that use in form of:
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Product category used:
PC 19: Intermediate
Sector of end use:
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
Substance supplied to that use in form of:
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 15: Use as laboratory reagent
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Process category (PROC):
PROC 15: Use as laboratory reagent
Process category (PROC):
PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Sector of end use:
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
Substance supplied to that use in form of:
as such
Subsequent service life relevant for this use:
no

Uses at industrial sites

Registration/ Notification status for the use:
use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
Environmental release category (ERC):
ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Process category (PROC):
PROC 15: Use as laboratory reagent
Product category used:
PC 32: Polymer preparations and compounds
Sector of end use:
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
Substance supplied to that use in form of:
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for the environmentopen allclose all
Environmental release category (ERC):
ERC2: Formulation into mixture
Environmental release category (ERC):
ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Process category (PROC):
PROC 15: Use as laboratory reagent
Product category used:
PC 32: Polymer preparations and compounds
Sector of end use:
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
Substance supplied to that use in form of:
as such
Subsequent service life relevant for this use:
no

Uses at industrial sites

Registration/ Notification status for the use:
use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
Name of activity / technique:
Use of intermediate (ERC 6A)
Environmental release category (ERC):
ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
Name of activity / technique:
Use of intermediate (PROC 3)
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
Use of intermediate (PROC 15)
Process category (PROC):
PROC 15: Use as laboratory reagent
Name of activity / technique:
Use of intermediate (PROC 1)
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Name of activity / technique:
Use of intermediate (PROC 8A)
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Name of activity / technique:
Use of intermediate (PROC 8B)
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Name of activity / technique:
Use of intermediate (PROC 2)
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no
Related assessment:
use assessed in an own CSR

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 15: Use as laboratory reagent
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Process category (PROC):
PROC 15: Use as laboratory reagent
Process category (PROC):
PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Product category used:
PC 19: Intermediate
PC 32: Polymer preparations and compounds
Sector of end use:
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
Substance supplied to that use in form of:
as such
Subsequent service life relevant for this use:
no

Uses at industrial sites

Registration/ Notification status for the use:
use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
Environmental release category (ERC):
ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Process category (PROC):
PROC 15: Use as laboratory reagent
Product category used:
PC 32: Polymer preparations and compounds
Sector of end use:
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
Substance supplied to that use in form of:
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 10: Roller application or brushing
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Process category (PROC):
PROC 15: Use as laboratory reagent
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Registration/ Notification status for the use:
use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
Name of activity / technique:
Use in the production of Switch Gear (ERC 6C)
Environmental release category (ERC):
ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
Name of activity / technique:
Use in the production of Switch Gear - Containers are connected to a closed mixing system (PROC 3)
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
Use in the production of Switch Gear - Mixing of Epoxy, Anhydrides, and Fillers is performed in a closed system (PROC 3)
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
Use in the production of Switch Gear - Epoxy, Anhydrides, and Filler are transferred to a closed mobile mixer system (PROC 3)
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
Use in the production of Switch Gear - Epoxy, Anhydrides, and Filler are transferred to a mobile mixer system (PROC 8B)
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Name of activity / technique:
Use in the production of Switch Gear - Transport of Epoxy, Anhydrides, and Filler occurs in a closed system (PROC 3)
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
Use in the production of Switch Gear - The mobile mixer is closed and transported and connected to an automatic pressure gelation machine (PROC 3)
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
Use in the production of Switch Gear - Injection of Epoxy-Anhydride-Filler mixture into the mould (PROC 3)
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
Use in the production of Switch Gear - Mould is heated and curing (polymerisation reaction) is initiated and completed. Mould is opened (PROC 4)
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Name of activity / technique:
Use in the production of Switch Gear - Deburing of the object is done manually on a workstation. After which the object is moved to an oven to complete the curing process (PROC 21)
Process category (PROC):
PROC 21: Low energy manipulation of substances bound in materials and/or articles
Name of activity / technique:
Use in the production of Switch Gear - The object is post-cured in an oven equipped with an extraction to the external environment thus creating underpressure in the oven and preventing release of anhydrides (PROC 3)
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
Use in the production of Switch Gear - The object is post-cured in a standard oven equipped with local exhaust ventilation (PROC 4)
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Name of activity / technique:
Use in the production of Switch Gear - The object is post-cured in a standard oven (PROC 4)
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Name of activity / technique:
Use in the production of Switch Gear - Quality Control/laboratory operations involving anhydrides (PROC 15)
Process category (PROC):
PROC 15: Use as laboratory reagent
Name of activity / technique:
Use in the production of Switch Gear - Mould is heated and curing (polymerisation reaction) is initiated. Object is manually removed from mould when the object is roughly 80% cured (PROC 21)
Process category (PROC):
PROC 21: Low energy manipulation of substances bound in materials and/or articles
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no
Related assessment:
use assessed in an own CSR

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Process category (PROC):
PROC 15: Use as laboratory reagent
Process category (PROC):
PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Sector of end use:
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
Substance supplied to that use in form of:
as such
Subsequent service life relevant for this use:
no

Uses at industrial sites

Registration/ Notification status for the use:
use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
Name of activity / technique:
Use of monomers in polymerisation processes (ERC 6C)
Environmental release category (ERC):
ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
Name of activity / technique:
Use of monomers in polymerisation processes (PROC 4)
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Name of activity / technique:
Use of monomers in polymerisation processes (PROC 8B)
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Name of activity / technique:
Use of monomers in polymerisation processes (PROC 3)
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
Use of monomers in polymerisation processes (PROC 15)
Process category (PROC):
PROC 15: Use as laboratory reagent
Name of activity / technique:
Use of monomers in polymerisation processes (PROC 2)
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
Use of monomers in polymerisation processes (PROC 8A)
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no
Related assessment:
use assessed in an own CSR

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Sector of end use:
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
Substance supplied to that use in form of:
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Process category (PROC):
PROC 15: Use as laboratory reagent
Product category used:
PC 32: Polymer preparations and compounds
Sector of end use:
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
Substance supplied to that use in form of:
as such
Subsequent service life relevant for this use:
no

Uses at industrial sites

Registration/ Notification status for the use:
use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
PROC 5: Mixing or blending in batch processes
PROC 7: Industrial spraying
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
PROC 10: Roller application or brushing
PROC 13: Treatment of articles by dipping and pouring
Product category used:
PC 9a: Coatings and paints, thinners, paint removes
PC 32: Polymer preparations and compounds
Sector of end use:
SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
Substance supplied to that use in form of:
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Registration/ Notification status for the use:
use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
Name of activity / technique:
Use of monomers in polymerisation processes (hardener for epoxy resins) (ERC 6C)
Environmental release category (ERC):
ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
Name of activity / technique:
Use of monomers in polymerisation processes (hardener for epoxy resins) (PROC 10)
Process category (PROC):
PROC 10: Roller application or brushing
Name of activity / technique:
Use of monomers in polymerisation processes (hardener for epoxy resins) (PROC 14)
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Name of activity / technique:
Use of monomers in polymerisation processes (hardener for epoxy resins) (PROC 3)
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
Use of monomers in polymerisation processes (hardener for epoxy resins) (PROC 15)
Process category (PROC):
PROC 15: Use as laboratory reagent
Name of activity / technique:
Use of monomers in polymerisation processes (hardener for epoxy resins) (PROC 13)
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Name of activity / technique:
Use of monomers in polymerisation processes (hardener for epoxy resins) (PROC 8A)
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Name of activity / technique:
Use of monomers in polymerisation processes (hardener for epoxy resins) (PROC 4)
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Name of activity / technique:
Use of monomers in polymerisation processes (hardener for epoxy resins) (PROC 2)
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
Use of monomers in polymerisation processes (hardener for epoxy resins) (PROC 8B)
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no
Related assessment:
use assessed in an own CSR

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 10: Roller application or brushing
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Process category (PROC):
PROC 15: Use as laboratory reagent
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Registration/ Notification status for the use:
use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
Name of activity / technique:
Use in the production of High Voltage Rotating Machines (ERC 6C)
Environmental release category (ERC):
ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
Name of activity / technique:
Use in the production of High Voltage Rotating Machines - Closed unloading from a truck/drum into a closed storage system (rigorous containment) (PROC 8B)
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Name of activity / technique:
Use in the production of High Voltage Rotating Machines - Semi-open pumping from a drum via an extraction tube into a closed storage system (PROC 8B)
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Name of activity / technique:
Use in the production of High Voltage Rotating Machines - Placing of high voltage rotating device part(s) on a cart or in a tray on a cart and then into impregnation chamber, uncured residual epoxy-anhydrides mixture may be present on the tray, cart or in the chamber (PROC 13)
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Name of activity / technique:
Use in the production of High Voltage Rotating Machines - Impregnation of High Voltage Rotating Machine part(s) in a closed chamber (rigorous containment) (PROC 13)
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Name of activity / technique:
Use in the production of High Voltage Rotating Machines - Removal of excess resin/hardener mixture from places on the high voltage rotating machine part(s) at which it is not desired (cleaning step) (PROC 13)
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Name of activity / technique:
Use in the production of High Voltage Rotating Machines - Transfer of the High Voltage Rotating Machine part to a closed oven (PROC 13)
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Name of activity / technique:
Use in the production of High Voltage Rotating Machines - Curing of impregnated High Voltage Rotating Machine part in a closed oven (rigorous containment) (PROC 13)
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Name of activity / technique:
Use in the production of High Voltage Rotating Machines - Cleaning of residual partly hydrolysed epoxy-anhydride mixture from transportation tray, cart(s) (PROC 28)
Process category (PROC):
PROC28: Manual maintenance (cleaning and repair) of machinery
Name of activity / technique:
Use in the production of High Voltage Rotating Machines - Quality Control/laboratory operations involving anhydrides (PROC 15)
Process category (PROC):
PROC 15: Use as laboratory reagent
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no
Related assessment:
use assessed in an own CSR