Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

On contact with eyes : Flush with water.
On skin contact : flush with water.
If inhaled : Remove to fresh air.
On ingestion : Obtain medical attention immediately.

Fire-fighting measures

Suitable extinguishing media :
On large fires use AFFF alcohol compatible foam or water spray (fog). On small fires use AFFF alcohol compatible foam, CO2 or water spray (fog). Water can be used to cool fire exposed containers. Most fire extinguishing media will cause hydrogen release. Thus, in poorly ventilated or confined spaces, the accumulation of hydrogen may result in flash fire or explosion if ignited. Applying foam may release flammable hydrogen gas that can betrapped under the foam
.
Unsuitable extinguishing media :
Dry powder. Do not allow extinguishing medium to contact container contents.
Hazards during fire fighting : Electrostatic charges may be generated during transfer of product from its container. Ensure that all equipment is electrically earthed. Vapours may form explosive mixtures with air.

Hazardous Combustion Products :
Thermal breakdown of this product during fire or very high heat conditions may evolve
the following decomposition products: Silica. Carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde. Hydrogen.

Special protective equipment/procedures:
A self-contained respirator and protective clothing should be worn. Determine the need to evacuate or isolate the area according to your local emergency plan. Use water spray to keep fire exposed containers cool.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
A self-contained respirator and protective clothing should be worn. Determine the need to evacuate or isolate the area according to your local emergency plan. Eliminate all possible sources of ignition.

Environmental precautions:
Prevent from spreading or entering into drains, ditches or rivers by using sand, earth or other appropriate barriers.

Methods and materials for containment and cleaning up:
Determine the need to evacuate or isolate the area according to your local emergency plan. Eliminate all possible sources of ignition. Very large spills should be contained by bunding, etc... procedures. Mop, wipe or soak up with absorbent material and place in a vented container. The spilled product produces an extremely slippery surface.

Handling and storage

Advice on safe handling :
General ventilation is required. Local ventilation is recommended. Do not breathe vapour. Avoid skin and eye contact. Do not ingest. Do not empty into drains.

Advice on storage :
Store in a flameproof, well ventilated area. Electrostatic charges may be generated during transfer of product from its container. Ensure that all equipment is electrically earthed. This product slowly evolves hydrogen on storage. Keep only in a vented container in a well ventilated area. Keep container closed and store away from water or moisture. Do not store in or use glass containers.
Vapours may form explosive mixtures with air. Storage temperature: minimum 0 °C, maximum 50 °C

Transport information

Land transport (ADR/RID)

UN number:
UN 1993
Proper shipping name and description:
FLAMMABLE LIQUID, N.O.S.(Methoxysilane / Methanol)
Chemical name:
Methoxysilane / Methano
Language:
English
Class:
3
Packaging group:
III
Labels:
3
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
UN No. : UN 1993
Proper shipping name and description:
Proper Shipping Name : FLAMMABLE LIQUID, N.O.S.(Methoxysilane / Methanol)
Chemical name:
Methoxysilane / Methanol
Class:
Class : 3
Packaging group:
Packing group : III
EmS code:
F-E
S-E
Labels:
Labels : flammable liquid
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
UN 1993
Proper shipping name and description:
Proper Shipping Name : Flammable liquid, n.o.s.(Methoxysilane / Methanol)
Chemical name:
Methoxysilane / Methanol
Class:
Class : 3
Packaging group:
Packing group : III
Labels:
Labels : Flammable Liquid
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering Controls :
Ventilation : General ventilation and Local Exhaust Ventilation (LEV), as applicable.

Personal protection equipment:
Respiratory protection : Suitable respiratory protection should be worn if the product is used in large quantities, confined spaces or in other circumstances where the OEL may be approached or exceeded. Depending on the working conditions, wear a respiratory mask with filter(s) AX or use
a self-contained respirator. The choice of a filter type depends on the amount and type of chemical being handled in the workplace. Regarding filter characteristics, contact your respiratory protectionsupplier.
Hand protection : Chemical protective gloves should be worn: Silver shield(TM). 4H(TM), Butyl or neoprene type gloves. Regarding glove's breakthrough time,contact your chemical protective glove supplier.
Eye/face protection : Face shield or safety goggles.
Skin protection : Wear impervious overalls in circumstances where significant skin contact can occur.
Hygiene measures : Exercise good industrial hygiene practice. Wash after handling, especially before eating, drinking or smoking.
Environmental exposure control :Prevent from spreading or entering into drains, ditches or rivers by using sand, earth or
other appropriate barriers. Treatment of effluent in waste water treatment plant.

Stability and reactivity

Reactivity : This product releases methanol.
Stability : Stable under normal usage conditions.
Possibility of hazardous reactions : Some hydrogen gas may be released. Hydrogen is flammable and can form explosive mixtures with air.
Conditions to avoid : Eliminate all possible sources of ignition.
Materials to avoid : Can react with strong oxidising agents.
Hazardous decomposition products : Thermal breakdown of this product during fire or very high heat conditions may evolve
the following decomposition products: Silica. Carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde. Hydrogen.

Disposal considerations

Product and packaging disposal : Dispose of in accordance with local regulations. According to the European Waste Catalogue, Waste Codes are not product specific, but application specific. Waste codes should be assigned by the user, preferably in discussion with the waste disposal authorities.