Registration Dossier

Physical & Chemical properties

Flash point

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
flash point of flammable liquids
Type of information:
experimental study
Adequacy of study:
key study
Study period:
2007-11-07 - 2008-06-04
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
other: Guideline study, non-GLP. Study performed and documented equivalent to GLP standards. Study according to relevant guideline.
Qualifier:
according to
Guideline:
EU Method A.9 (Flash-Point)
Version / remarks:
Directive 92/69/EEC, Official Journal L 383 A 1992, Pensky-Martens method, ASTM D93
Principles of method if other than guideline:
The flash point is the lowest temperature, corrected to a pressure of 1013.25 hPa (mbar), at which a liquid evolves vapours, under the conditions
defined in the test method, in such an amount that a flammable vapour-air mixture is produced in the test vessel.
GLP compliance:
no
Remarks:
Study performed and documented equivalent to GLP standards
Type of method:
closed cup
Flash point:
104 °C
Atm. press.:
1 013 hPa
Remarks on result:
other: Pensky Martens closed cup
Conclusions:
In a valid guideline study the flash point is reported to be 104 °C at 1013 hPa (Pensky Martens closed cup).
Executive summary:

In a valid guideline study the flash point is reported to be 104 °C at 1013 hPa (ASTM D93, Pensky Martens closed cup).

NOTE: Any of data in this dataset are disseminated by the European Union on a right-to-know basis and this is not a publication in the same sense as a book or an article in a journal. The right of ownership in any part of this information is reserved by the data owner(s). The use of this information for any other, e.g. commercial purpose is strictly reserved to the data owners and those persons or legal entities having paid the respective access fee for the intended purpose.

Description of key information

In a valid guideline study according to EU test method A9 [Directive 92/69/EEC, Official Journal L 383 A 1992] the flash point is reported to be 104.0 °C at 1013 hPa (closed cup method, ASTM D93 according to Pensky-Martens).

Key value for chemical safety assessment

Flash point at 101 325 Pa:
104 °C

Additional information