Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

General advice:
Remove contaminated clothing.
If inhaled:
Keep patient calm, remove to fresh air, seek medical attention.
On skin contact:
Wash thoroughly with soap and water.
On contact with eyes:
Immediately wash affected eyes for at least 15 minutes under running water with eyelids held open,
consult an eye specialist.
On ingestion:
Rinse mouth immediately and then drink plenty of water, seek medical attention.
Note to physician:
Treatment: Symptomatic treatment (decontamination, vital functions

Fire-fighting measures

Suitable extinguishing media:
water spray, dry extinguishing media, carbon dioxide, foam
Special protective equipment:
Wear self-contained breathing apparatus and chemical-protective clothing.
Further information:
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.

Accidental release measures

Personal precautions:
Avoid contact with the skin, eyes and clothing. Take off immediately all contaminated clothing.
Ensure adequate ventilation.
Environmental precautions:
Do not discharge into drains/surface waters/groundwater.
Methods for cleaning up or taking up:
For large amounts: Dike spillage. Pump off product.
For residues: Contain with absorbent material (e.g. sand, silica gel, acid binder, general purpose
binder, sawdust).
Dispose of absorbed material in accordance with regulations.

Handling and storage

Handling
Ensure thorough ventilation of stores and work areas.
Protection against fire and explosion:
Prevent electrostatic charge - sources of ignition should be kept well clear - fire extinguishers should
be kept handy.
Storage
Further information on storage conditions: Keep container tightly closed and dry; store in a cool
place. Protect from the effects of light.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Components with workplace control parameters
none
Personal protective equipment
Respiratory protection:
Respiratory protection in case of vapour/aerosol release. Particle filter with medium efficiency for
solid and liquid particles (e.g. EN 143 or 149, Type P2 or FFP2)
Hand protection:
Chemical resistant protective gloves (EN 374)
Suitable materials short-term contact and/or splashes (recommended: At least protective index 2,
corresponding > 30 minutes of permeation time according to EN 374)
butyl rubber (butyl) - 0.7 mm coating thickness
nitrile rubber (NBR) - 0.4 mm coating thickness
Supplementary note: The specifications are based on own tests, literature data and information of
glove manufacturers or are derived from similar substances by analogy. Due to many conditions
(e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in
practice may be much shorter than the determined permeation time.
Eye protection:
Safety glasses with side-shields (frame goggles) (f.e. EN 166)
Body protection:
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting
boots, chemical-protection suit (according to DIN-EN 465).
General safety and hygiene measures:
Handle in accordance with good industrial hygiene and safety practice.

Stability and reactivity

Thermal decomposition: No decomposition if stored and handled as
prescribed/indicated.
Substances to avoid:
strong oxidizing agents, acids, bases
Hazardous reactions:
No hazardous reactions if stored and handled as prescribed/indicated.
11. Toxicological

Disposal considerations

Observe national and local legal requirements.