Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Surface tension

Currently viewing:

Administrative data

Link to relevant study record(s)

Description of key information

The surface tension of 4-Hydroxy-TEMPO in double distilled water (1.0 g/L, at 20 ± 0.5°C) was determined to be  65.3 mN/m at 20 +/- °C

Key value for chemical safety assessment

Surface tension:
in mN/m at 20°C and concentration in mg/L:
1 000

Additional information

A study was conducted according to OECD TG 115 and Regulation (EC) No 440/2008 method A.5 to determine the surface tension of the test item 4-Hydroxy-TEMPO using the ring method. Therefore, a test solution with a concentration of 1.0 g/L was prepared. After filling the solution into the vessel of the tensiometer and tempering it to the test temperature of 20 °C ±0.5°C, the measuring procedure was started and repeated until the value of surface tension remained nearly constant. The surface tension of the test solution was calculated from the arithmetic mean of the last five measured values. Each measuring value is considering the correction according to Harkins-Jordan. The measured surface tension multiplied with the calibration factor of the tensiometer is finally rounded to one decimal place. The surface tension of 4-Hydroxy TEMPO in double distilled water (1.0 g/L), at 20 ± 0.5°C was determined to be 65.3 mN/m. Thus, the test item is classified as non-surface-active.