Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

INHALATION: If inhaled, remove to fresh air. If patient has difficulty in breathing, administer oxygen, keep him calm and protect him from loss of warmth. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. Get medical attention immediately. Medical surveillance for at least 48 hours.
INGESTION: Get medical attention immediately. Wash out mouth with water. Make the patient drink a large quantity of water, if possible with an addition of activated carbon, immediately, and then at frequent intervals. Do not induce vomiting unless directed to do so by medical personnel.
SKIN CONTACT: Wash skin immediately with plenty of water and soap. Subsequent cleansing with polyethyleneglycol 400, then again with water and
soap. In case of blueness of lips, skin or nails (cyanosis) let the person breathe oxygen. No consumption of alcohol after product contact. No physical exertion. Wash skin immediately with plenty of soap and water even when contact with the product is suspected. Remove contaminated clothing and shoes. Get medical attention immediately.
EYE CONTACT: Get medical attention immediately. Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes.

Fire-fighting measures

SUITABLE: In case of fire, use water spray (fog), foam, dry chemical or CO2.
NOT SUITABLE: water jet
SPECIAL EXPOSURE HAZARDS: In a fire or if heated, a pressure increase will occur and the container may burst.
Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. This material is very toxic to aquatic organisms. Fire water contaminated with this material must be contained and prevented from being discharged to any waterway, sewer or drain.
HAZARDOUS COMBUSTION PRODUCTS: Decomposition products may include the following materials: carbon oxides, nitrogen oxides, halogenated compounds
SPECIAL PROTECTIVE EQUIPEMENT FOR FIRE FIGHTERS: Fire-fighters should wear appropriate protective equipment and selfcontained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

Accidental release measures

PERSONAL PRECAUTIONS: No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilt material. Avoid breathing vapour or mist. Provide adequate ventilation. Put on appropriate personal protective equipment.
ENVIRONMENTAL PRECAUTIONS: Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
LARGE SPILL: Stop leak if without risk. Move containers from spill area. Prevent entry into sewers, water courses, basements or confined areas. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations. Dispose of via a licensed waste disposal contractor. Contaminated absorbent material may pose the same hazard as the spilt product.
SMALL SPILL: Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble or absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor.

Handling and storage

This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates and, in case the substance is transported to other sites for further processing, the substance should be handled at these sites under the Strictly Controlled Conditions as specified in REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each Manufacturing site. Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor and Downstream Manufacturer/User of the Registrant's intermediate.

HANDLING: Put on appropriate personal protective equipment. Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Do not get in eyes or on skin or clothing. Do not breathe vapour or mist. Do not ingest. Avoid release to the environment. Refer to special instructions/safety data sheet. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Empty containers retain product residue and can be hazardous. Do not reuse container.
STORAGE: Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and wellventilated area, away from incompatible materials and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabelled containers. Use appropriate containment to avoid environmental contamination.
PACKAGING MATERIALS RECOMMENDED: Use original container.
REMARKS: Take precautionary measures against electrostatic discharges. Avoid all possible sources of ignition (spark or flame). Ensure effective ventilation. Vent waste air only via suitable separators or scrubbers.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN2019
Shipping information
Proper shipping name and description:
CHLOROANILINES, LIQUID
Chemical name:
2-chloroaniline
Language:
English
Labels:
Danger, toxic if inhaled, in contact with skin and if swallowed.
Special provisions / remarks
Special provisions:
Toxic,
Combustible,
Flash point: 95°C
Keep separated from food stuff

Inland waterway transport (UN RTDG/ADN(R))

UN number:
UN2019
Shipping information
Proper shipping name and description:
CHLOROANILINES, LIQUID
Chemical name:
2-chloroaniline
Language:
English
Labels:
Danger, toxic if inhaled, in contact with skin and if swallowed.
Special provisions / remarks
Remarks:
Toxic,
Combustible,
Flash point: 95°C
Keep separated from food stuff

Marine transport (UN RTDG/IMDG)

UN number:
UN2019
Shipping information
Proper shipping name and description:
CHLOROANILINES, LIQUID
Chemical name:
2-chloroaniline
Labels:
Danger, toxic if inhaled, in contact with skin and if swallowed.
Special provisions / remarks
Remarks:
Toxic,
Combustible,
Flash point: 95°C
Keep separated from food stuff

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN2019
Shipping information
Proper shipping name and description:
CHLOROANILINES, LIQUID
Chemical name:
2-chloroaniline
Labels:
Danger, toxic if inhaled, in contact with skin and if swallowed.
Special provisions / remarks
Remarks:
Passenger aircraft: 609: 5L
Cargo aircraft: 611: 60 L

Additional transport information

Additional information
Special provisions / remarks / other:
Toxic,
Combustible,
Flash point: 95°C
Keep separated from food stuff

Exposure controls / personal protection

This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates and, in case the substance is transported to other sites for further processing, the substance should be handled at these sites under the Strictly Controlled Conditions as specified in REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each Manufacturing site. Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor and Downstream Manufacturer/User of the Registrant's intermediate.

EXPOSURE LIMIT VALUES: Not available.
RECOMMENDED MONITORING PROCEDURES: If this product contains ingredients with exposure limits, personal, workplace atmosphere or biological monitoring may be required to determine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective equipment. Reference should be made to European Standard EN 689 for methods for the assessment of exposure by inhalation to chemical agents and national guidance documents for methods for the determination of hazardous substances.
EXPOSURE CONTROLS
OCCUPATIONAL EXPOSURE CONTROLS: Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits.
HYGIENE MEASURES: Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location.
RESPIRATORY PROTECTION: Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. Recommended: Combination filter, e.g. DIN 3181 ABEK or selfcontained breathing apparatus (SCBA)
HAND PROTECTION: Chemical-resistant, impervious gloves or gauntlets complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary.<1 hours (breakthrough time): Baypren , Viton or Nitrile rubber - NBR After contamination with product change the gloves immediately and dispose of them according to relevant national and local regulations.
EYE PROTECTION: Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. Recommended: Tightly fitting safety goggles.
SKIN PROTECTION: Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. Wear protective clothing.
ENVIRONMENTAL EXPOSURE CONTROLS: Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.

Stability and reactivity

STABILITY: The product is stable.
DECOMPOSITION TEMPERATURE: 209°C
CONDITIONS TO AVOID: Air and light-sensitive.
HAZARDOUS DECOMPOSITION PRODUCTS: Under normal conditions of storage and use, hazardous decomposition products should not be produced.

Disposal considerations

METHODS OF DISPOSAL: Examine possibilities for re-utilisation. Product residues and uncleaned empty containers should be packaged, sealed, labelled, and disposed of or recycled according to relevant national and local regulations. Where large quantities are concerned, consult the supplier. When uncleaned empty containers are passed on, the recipient must be warned of any possible hazard that may be caused by residues. For disposal within the EC, the appropriate code according to the European Waste List (EWL) should be used. It is among the tasks of the polluter to assign the waste to waste codes specific to industrial sectors and processes according to the European Waste List (EWL).
HAZARDOUS WASTE: The classification of the product may meet the criteria for a hazardous waste.