Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 421-820-9 | CAS number: 192268-65-8 CD 28-0132; IRGALUBE 232
Partition coefficient
Administrative data
Link to relevant study record(s)
Description of key information
Estimated log Pow= 6.5 to 14.1
The estimated values of each constituent are as follows:
Log Pow of cosntituent A= 6.5
Log Pow of constituents B&C= 8.4
Log Pow of constituents D&E= 10.3
Log Pow of constituents F&G= 12.2
Log Pow of constituents H&I= 14.1
The constituent A has a measured log Pow value of 4.8 - 5.0.
It is noted that the measured values of "constituent A" are almost 2 log units lower than predicted value by KOWWIN. The experimental value of 4.8 is however what would be expected for a hydrolysis product of “constituent A”. The substance has been shown to hydrolyse in water, however at a much slower rate than could explain this discrepancy (T½ of ca.100 days at pH 7, see CAS 597 -82 -0).
Key value for chemical safety assessment
Additional information
The substance is UVCB containing 5 constitiuents. Reliable experimental data are available only for the main component (constituent A) of test substance. Two different studies are available. The first study corresponds to CAS 597 -82 -0, is in accordance with OECD TG 117 (HPLC method) and GLP criteria and is performed with "constituent A" alone. This study yielded a log Kow value of 5.0. In the second study corresponds to being registered substance, which was performed according to the same protocol, log Kow values were determined to be 4.8, 6.7 and 6.8 for "constituent A, B and C", respectively. The log Kow values determined for constituent B and C are however higher than should normally be determined in a HPLC study as it is considered suitable for log Kow values of up to 6. Therefore, in accordance with REACH guidance R.7a, the log Kow values for the different constituents A to I are calculated using KOWWIN (v1.68) module of software EPI Suite v.4.11.
Further, the substance contains 4 impurities at >0.1% for which ECHA disseminated data was gathered. These log Kow values are tabulated below.
Impurity | Log Kow | Comments |
Phenol (108 -95 -2) | ca. 1.5 | peer reviewed literature; reliability 2 |
2 -ter-butylphenol (88 -18 -6) | 3.3 | OECD 117; reliability 1 |
4 -tert-butylphenol (98 -54 -4) | 3.0 | OECD 117; reliability 1 |
2,4 -ditertbutyphenol (96 -76 -4) | 4.8 | OECD 117; reliability 1 |
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
