Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 269-056-3 | CAS number: 68186-94-7 This substance is identified in the Colour Index by Colour Index Constitution Number, C.I. 77494.
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://www.echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_manufacture-use-and-exposure.png)
Formulation
Documentsopen allclose all
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 25: Other hot work operations with metals
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category formulated:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 0: Other: PC5 Artists supply and Hobby preparations PC6: Automotive Care Products PC10 Buildings and construction preparations, UCN code 62 – electromechanical components, UCN code 26 – Food / Feedstuff flavourings and nutrients, UCN code P15500 - catalysts
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 25: Other hot work operations with metals
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category formulated:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 0: Other: PC5 Artists supply and Hobby preparations PC6: Automotive Care Products PC10 Buildings and construction preparations, UCN code 62 – electromechanical components, UCN code 26 – Food / Feedstuff flavourings and nutrients, UCN code P15500 - catalysts
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 25: Other hot work operations with metals
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category formulated:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 11: Explosives
- PC 12: Fertilisers
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 0: Other: PC5 Artists supply and Hobby preparations PC6: Automotive Care Products PC10 Buildings and construction preparations, UCN code 62 – electromechanical components, UCN code 26 – Food / Feedstuff flavourings and nutrients, UCN code P15500 - catalysts
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- manganese ferrite black spinel
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- manganese ferrite black spinel
- Name of activity / technique:
- Formulation
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- ERC3: Formulation into solid matrix
- Name of activity / technique:
- Formulation
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 25: Other hot work operations with metals
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category formulated:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 0: Other: Other PC5 Artists supply and Hobby PC10 Buildings and construction preparations, UCN code 62 - electomechanical components, UCN code 26 - Food/Feedstuff flavouring and nutrients, UCN code P15500 - catalysts
- Substance supplied to that use in form of:
- as such
- in a mixture
- Related assessment:
- use assessed in a joint CSR
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Formulation
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 25: Other hot work operations with metals
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category formulated:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 0: Other: PC5 Artists supply and Hobby preparations PC6: Automotive Care Products PC10 Buildings and construction preparations, UCN code 62 – electromechanical components, UCN code 26 – Food / Feedstuff flavourings and nutrients, UCN code P15500 - catalysts
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category formulated:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 0: Other: PC5 Artists supply and Hobby preparations PC6: Automotive Care Products PC10 Buildings and construction preparations, UCN code 62 – electromechanical components, UCN code 26 – Food / Feedstuff flavourings and nutrients, UCN code P15500 - catalysts
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category formulated:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 0: Other: PC5 Artists supply and Hobby preparations PC6: Automotive Care Products PC10 Buildings and construction preparations, UCN code 62 – electromechanical components, UCN code 26 – Food / Feedstuff flavourings and nutrients, UCN code P15500 - catalysts
- Substance supplied to that use in form of:
- as such
- in a mixture
- Related assessment:
- use assessed in a joint CSR
Formulation
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- ERC3: Formulation into solid matrix
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Product category formulated:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 0: Other: PC5 Artists supply and Hobby preparations PC6: Automotive Care Products PC10 Buildings and construction preparations, UCN code 62 – electromechanical components, UCN code 26 – Food / Feedstuff flavourings and nutrients, UCN code P15500 - catalysts
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Formulation as colorants and some other technical applications
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Name of activity / technique:
- Formulation as colorants and some other technical applications
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 25: Other hot work operations with metals
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category formulated:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC2: Formulation into mixture
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- Product category formulated:
- PC 9a: Coatings and paints, thinners, paint removes
- Substance supplied to that use in form of:
- in a mixture
Formulation
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC2: Formulation into mixture
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category formulated:
- PC 1: Adhesives, sealants
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 25: Other hot work operations with metals
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category formulated:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 0: Other: PC5 Artists supply and Hobby preparations PC6: Automotive Care Products PC10 Buildings and construction preparations, UCN code 62 – electromechanical components, UCN code 26 – Food / Feedstuff flavourings and nutrients, UCN code P15500 - catalysts
Formulation
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 25: Other hot work operations with metals
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category formulated:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 0: Other: PC5 Artists supply and Hobby preparations PC6: Automotive Care Products PC10 Buildings and construction preparations, UCN code 62 – electromechanical components, UCN code 26 – Food / Feedstuff flavourings and nutrients, UCN code P15500 - catalysts
- Substance supplied to that use in form of:
- as such
- in a mixture
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)