Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Description of first aid measures
General information:
Immediately remove any clothing soiled by the product.
- After inhalation:
Supply fresh air and to be sure call for a doctor.
- After skin contact:
Immediately rinse with water.
If skin irritation continues, consult a doctor.
- After eye contact:
Rinse opened eye for several minutes under running water.
Call a doctor immediately.
- After swallowing:
Call for a doctor immediately.

Fire-fighting measures

Extinguishing media
- Suitable extinguishing agents:
The product is not flammable.
Use fire extinguishing methods suitable to surrounding conditions.
- For safety reasons unsuitable extinguishing agents:
Water with full jet
- Special hazards arising from the substance or mixture
Formation of toxic gases is possible during heating or in case of fire.
In case of fire, the following can be released:
Hydrogen chloride (HCl)
Nitrogen oxides (NOx)
Hydrogen cyanide (HCN)
- Advice for firefighters
- Protective equipment:
No special measures required.

Accidental release measures

- Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
Use respiratory protective device against the effects of fumes/dust/ aerosol.
Avoid contact with the eyes and skin.
- Environmental precautions:
Do not allow product to reach sewage system or any water course.
Inform respective authorities in case of seepage into water course or sewage system.
Prevent from spreading (e.g. by damming-in or oil barriers).
Keep contaminated washing water and dispose of appropriately.
- Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated materia

Handling and storage

- Handling:
- Precautions for safe handling
Prevent formation of aerosols.
Avoid contact with the eyes and skin.
Information about fire - and explosion protection:
No special measures required.
- Conditions for safe storage, including any incompatibilities

- Storage:
- Requirements to be met by storerooms and receptacles:
Prevent any seepage into the ground.
Use only receptacles specifically permitted for this substance/ product.
- Information about storage in one common storage facility:
Store away from foodstuffs.
- Further information about storage conditions:
Keep container tightly sealed.

Transport information

Land transport (ADR/RID)

UN number:
UN1760
Proper shipping name and description:
1760 corrosive liquid, N.O.S
Language:
English
Class:
8 (C9) Corrosive substances.
Packaging group:
III
Labels:
8
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
UN1760
Proper shipping name and description:
Corrosive liquid, N.O.S
Class:
8 Corrosive substances.
Packaging group:
III
EmS code:
F-A
S-B
Labels:
8
Marine pollutant
Remarks
Special precautions for user
Warning: Corrosive substances.
Danger code (Kemler): 80

Air transport ICAO/IATA

UN number:
UN1760
Proper shipping name and description:
Corrosive liquid, N.O.S
Class:
8 Corrosive substances.
Packaging group:
III
Labels:
8
Remarksopen allclose all

Additional transport information

Additional transport information
Excepted quantities (EQ): E1
Limited quantities (LQ): 5L
Transport category: 3
Tunnel restriction code: E

Exposure controls / personal protection

Control parameters
- Ingredients with limit values where monitoring at the workplace is recommended :
The product does not contain any relevant quantities of materials with critical values where monitoring at the workplace is recommended.
- Additional information:
The lists valid during the making were used as basis.
- Exposure controls


- Personal protective equipment:
- General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.
Immediately remove all soiled and contaminated clothing
Do not inhale gases / fumes / aerosols.
Avoid contact with the eyes and skin.
Safety shower at proximity.

Eye wash station at proximity.
- Respiratory protection: Use suitable respiratory protective device in case of insufficient ventilation.
- Protection of hands: PVC gloves
- Eye protection: Tightly sealed goggles Face protection
- Body protection: Impervious protective clothing Boots

Stability and reactivity

- Reactivity
- Chemical stability
- Thermal decomposition / conditions to be avoided:
To avoid thermal decomposition do not overheat.
Dangerous reactions
Corrosive action on metals.
Reacts with acids, alkalis and oxidizing agents.

- Hazardous decomposition products:
Carbon monoxide and carbon dioxide
Nitrogen oxides (NOx)

Disposal considerations

- Waste treatment methods
- Recommendation
Must be specially treated adhering to official regulations.
Contact manufacturer for recycling information.
Do not empty into drains and avoid release to the environment. This product must be disposed in a certificated
hazardous or special waste collection point.
- Uncleaned packaging:
- Recommendation:
Disposal must be made according to official regulations.
Packaging may be reused or recycled after cleaning.
If recycling is not possible, dispose according to the local regulations.
- Recommended cleansing agents:
Water, if necessary together with cleansing agents.