Registration Dossier

Administrative data

First-aid measures

1. Description of first aid measures

General information
Remove/Take off immediately all contaminated clothing.
Get medical advice/ attention if you feel unwell.
Show this safety data sheet to the doctor in attendance.

After inhalation
If inhaled, remove to fresh air.
Get medical advice/ attention.

After contact with skin
In case of contact, immediately flush skin with soap and plenty of water.

After contact with eyes
In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice

After ingestion
Get medical attention immediately.

2. Most important symptoms and effects, both acute and delayed

Symptoms :
None known.

Risks :
None known.


3. Indication of any immediate medical attention and special treatment needed

Treatment
Treat symptomatically.

Fire-fighting measures

1. Extinguishing media

Suitable extinguishing media
water spray jet
foam
carbon dioxide
dry powder

2. Special hazards arising from the substance or mixture

ISpecific hazards during firefighting:
In case of fire hazardous decomposition products may be produced such as:
Carbon monoxide
Carbon dioxide (CO2)
Nitrogen oxides (NOx)
Combustion gases of organic materials must in principle be graded as inhalation poisons.


3. Advice for firefighters

Special protective equipment for firefighters:
Self-contained breathing apparatus

Further information:
Wear suitable protective equipment.
Evacuate endangered area, seal off area.


Accidental release measures

1. Personal precautions, protective equipment and emergency procedures

Wear suitable personal protective equipment.
Ensure adequate ventilation.

2. Environmental precautions

Do not allow to enter drains or waterways

3. Methods and material for containment and cleaning up

Pick up with absorbent material (eg sand, sawdust). Rinse away rest with water

4. Reference to other sections

Additional information
Information regarding Safe handling, see corresponding chapter
For personal protection see corresponding chapter
Information regarding Waste Disposal, see corresponding chapter

Handling and storage

1. Precautions for safe handling

Advice on safe handling
No special measures necessary if stored and handled as prescribed.

Hygiene measures
Observe the usual precautions for handling chemicals.
When using do not eat or drink.
Keep away from food and drink.
Wash hands before breaks and at the end of workday.
Remove/Take off immediately all contaminated clothing.

Advice on protection against fire and explosion
Observe the general rules of industrial fire protection.

2. Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers: Keep only in the original container. Keep container tightly closed.

Further information on storage conditions: Keep containers tightly closed in a cool, well-ventilated place. Handle and open container with care.

Advice on common storage: No conditions to be specially mentioned.

Further information on storage stability: no data available


3. Specific end use(s)

No further recommendations.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls

General protective measures

Avoid contact with eyes and skin

Hygiene measures
Observe the usual precautions for handling chemicals.
When using do not eat or drink.
Keep away from food and drink.
Wash hands before breaks and at the end of workday.
Remove/Take off immediately all contaminated clothing.

Eye protection: Safety glasses

Hand protection
Break through time: 80 min
Glove thickness: 0,7 mm
Remarks: Long-term exposure Impervious butyl rubber gloves

Break through time: 30 min
Glove thickness: 0,4 mm
Remarks: For short-term exposure (splash protection): Nitrile rubber gloves.

Remarks: These types of protective gloves are offered by various manufacturers. Please note the manufacturers´ detailed statements, e
specially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under
which the gloves are being used.

Protective measures: Avoid contact with skin and eyes.





Stability and reactivity

1. Reactivity

See section 3. "Possibility of hazardous reactions"

2. Chemical stability
Stable under normal conditions.

3. Possibility of hazardous reactions
No dangerous reaction known under conditions of normal use.

4. Conditions to avoid
None known.

5. Incompatible materials
not known

6. Hazardous decomposition products
When handled and stored appropriately, no dangerous decomposition products are known

Disposal considerations

Waste treatment methods

Product: In accordance with local authority regulations, take to special waste incineration plant

Contaminated packaging: Packaging that cannot be cleaned should be disposed of as product waste