Registration Dossier

Administrative data

First-aid measures

By inhalation:
This product does not contain substances classified as dangerous for inhalation, however, in case of symptoms of intoxication remove the person affected from the exposure area and provide with fresh air. Seek medical attention if the symptoms get worse or persist.
By skin contact:
In case of contact it is recommended to clean the affected area thoroughly with water and neutral soap. In case of modifications on the skin (stinging, redness, rashes, blisters,…), seek medical advice with this Security Data Sheet.
Eye contact:
Rinse eyes thoroughly with water for at least 15 minutes. If the injured person uses contact lenses, these should be removed unless they are stuck to the eyes, as this could cause further damage. In all cases, after cleaning, a doctor should be consulted as quickly as possible with the MSDS of the product.
By consumption:
Do not induce vomiting, but if it does happen keep the head up to avoid inhalation. Keep the person affected at rest. Rinse out the mouth and throat, as they may have been affected during ingestion.

Fire-fighting measures

Extinguishing media:
Product is non-flammable under normal conditions of storage, manipulation and use. In the case of inflammation as a result of improper manipulation, storage or use preferably use polyvalent powder extinguishers (ABC powder), in accordance with the Regulation on fire protection systems. IT IS NOT RECOMMENDED to use tap water as an extinguishing agent.
Special hazards arising from the substance or mixture:
As a result of combustion or thermal decomposition reactive subproducts are created that can become highly toxic and, consequently, can present a serious health risk.
Advice for firefighters:
Depending on the magnitude of the fire it may be necessary to use full protective clothing and individual respiratory equipment. Minimum emergency facilities and equipment should be available (fire blankets, portable first aid kit,...) in accordance with Directive 89/654/EC.
Additional provisions:
Act in accordance with the Internal Emergency Plan and the Information Sheets on actions to take after an accident or other emergencies. Destroy any source of ignition. In case of fire, refrigerate the storage containers and tanks for products susceptible to inflammation, explosion or BLEVE as a result of high temperatures. Avoid spillage of the products used to extinguish the fire into an aqueous medium.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Isolate leaks provided that there is no additional risk for the people performing this task. Personal protection equipment must be used against potential contact with the spilt product (See section 8). Evacuate the area and keep out those who do not have protection.
Environmental precautions:
Keep product away from drains, surface and underground water.
Methods and material for containment and cleaning up:
Absorb the spillage using sand or inert absorbent and move it to a safe place. Do not absorb in sawdust or other combustible absorbents.

Handling and storage

Precautions for safe handling:
Comply with the current legislation concerning the prevention of industrial risks. Keep containers hermetically sealed. Control spills and residues, destroying them with safe methods. Avoid leakages from the container. Maintain order and cleanliness where dangerous products are used.
Product is non-flammable under normal conditions of storage, manipulation and use. It is recommended to transfer at slow speeds to avoid the generation of electrostatic charges that can affect flammable products.
Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.

Conditions for safe storage, including any incompatibilities:
Maximum Temp.: 25 ºC
Avoid sources of heat, radiation, static electricity and contact with food

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Respiratory protection: The use of protection equipment will be necessary if a mist forms or if the professional exposure limits are exceeded.
Specific protection for the hands: Chemical protective gloves (CE CAT I)
Ocular and facial protection: Panoramic glasses against liquid splash (CE CAT II)
Bodily protection: Work clothing (CE CAT I); Anti-slip work shoes (CE CAT II)
Additional emergency measures: Emergency shower, eyewash stations.

Stability and reactivity

Reactivity: No hazardous reactions expected.
Chemical stability: Stable under the conditions of storage, handling and use.
Possibility of hazardous reactions: Under the conditions no hazardous reactions are expected to produce a pressure or excessive temperatures.
Conditions to avoid: Not applicable.
Hazardous decomposition products: Depending on the decomposition conditions, complex mixtures of chemical substances can be released: carbon dioxide (CO2), carbon monoxide and other organic compounds.

Disposal considerations

Waste management (disposal and evaluation):
Consult the authorized waste service manager on the assessment and disposal operations in accordance with Annex 1 and Annex 2 (Directive 2008/98/EC). As under 15 01 (2000/532/EC) of the code and in case the container has been in direct contact with the product, it will be processed the same way as the actual product. Otherwise, it will be processed as non-dangerous residue. Do not disposal down the drain.