Registration Dossier

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
oxidising solids
Type of information:
experimental study
Adequacy of study:
key study
Study period:
2 September 2014
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to
Guideline:
EU Method A.17 (Oxidising Properties (Solids))
Deviations:
no
GLP compliance:
yes (incl. certificate)
Specific details on test material used for the study:
SOURCE OF TEST MATERIAL
- Name of test material (as cited in study report):4-amino-5(ethylsulphonyl)-o-anisic acid
- Physical state:Solid
- Analytical purity: 99.81%
- Lot/batch numberl:MP1032.31
Contact with:
powdered cellulose
Key result
Sample tested:
reference mixture as specified
Parameter:
maximum burning rate
Result:
2.11 mm/s
Remarks on result:
other: Reference mixture: the mixtures of barium nitrate(V) and cellulose in weight ratios from 10 % to 90 % of cellulose content.
Key result
Sample tested:
test mixture as specified
Remarks:
test substance with cellulose in various weight ratios (from 10% to 90%)
Parameter:
burning rate
Result:
0.5 mm/s
Remarks on result:
other: the train did not burn completely

Results of the preliminary:

After applying the flame of burner, the sample ignites but the flame is not spread to the rest of the train. Result is negative.

Results of the train test: Results of determination of oxidizing properties for the reference mixture:

Barium nitrate
 (V) [%]

10

20

30

40

50

60

70

80

90

Cellulose [%]

90

80

70

60

50

40

30

20

10

 Burning time of the pile [s]

104

 95

 96

 97

111

 96

 132

240

 NI

 Burning rate of the pile [mm/s]

 1.92

 2.11

 2.08

 2.06

 1.80

 2.08

 1.52

 0.83

 -

 Maximal burning rate of the reference mixture pile [mm/s]

 2.11

NI: The train does not ignite.

Part I: measure of burning time and burning rate of piles (200 mm) of mixture test substance with cellulose in various weight ratios (from 10% to 90%) is shown below. During the determination, the substance burnt completely.

Results of determination of oxidizing properties for test item:

Test substance
 (content in mixture) [%]

10

20

30

40

50

60

70

80

90

Cellulose
(content in mixture) [%]

90

80

70

60

50

40

30

20

10

 Burning time of the pile [s]

(50mm/62s)*

 (20mm/39s)*

(45mm/96s)*

(20mm/43s)*

NI

 NI

 NI

 NI

 NI

 Burning rate of the pile [mm/s]

(0.5)*

(0.5)*

(0.5)*

(0.5)*

 -

 -

 -

 -

 -

 Maximal burning rate of the reference mixture pile [mm/s]

 2.11

* the train does not burn completely.

NI: the train does not ignite.

Burning rate of the train of mixture test substance with cellulose in weight ratio 90% to 10 % is much smaller (the train does not ignite) than maximal burning rate of the reference mixture train.

Interpretation of results:
GHS criteria not met
Remarks:
In the preliminary test there was not a vigorous reaction
Conclusions:
Test item has not oxidizing properties in accordance with EU Method A.17 criteria.
Executive summary:

The determination of the oxidising properties of the test substance was performed according to EU method A.17 and GLP study. Burning rate of the train of mixture test substance with cellulose in weight ratio 90% to 10 % is much smaller (the train does not ignite) than maximal burning rate of the reference mixture train. The test item has no oxidizing properties in accordance with EU Method A.17 criteria.

Description of key information

Key study: Test method EU Method A.17. GLP study. The test item has no oxidizing properties.

Key value for chemical safety assessment

Oxidising properties:
non oxidising

Additional information

Key study: The determination of the oxidising properties of the test substance was performed according to EU method A.17. Burning rate of the train of mixture test substance with cellulose in weight ratio 90% to 10 % is much smaller (the train does not ignite) than maximal burning rate of the reference mixture train. The test item has no oxidizing properties in accordance with EU Method A.17 criteria.

Justification for classification or non-classification

Based on the available data, the test item is not classified according to CLP Regulation (EC) no. 1272/2008.