Registration Dossier

Administrative data

First-aid measures

· General information: Take affected persons out into the fresh air. Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
· After inhalation: Supply fresh air; consult doctor in case of complaints.
· After skin contact: Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
· After eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
· After swallowing: Rinse out mouth and then drink plenty of water. Do not induce vomiting; call for medical help immediately.

Fire-fighting measures

· Suitable extinguishing agents: CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Use fire extinguishing methods suitable to surrounding conditions.
· For safety reasons unsuitable extinguishing agents: Water with full jet
· Special hazards arising from the substance or mixture: Formation of toxic gases is possible during heating or in case of fire.
In case of fire, the following can be released: Carbon monoxide, Carbon dioxide, Allylalcohol, Acrolein,

Advice for firefighters
· Protective equipment: Wear self-contained respiratory protective device.
· Additional information: Cool endangered receptacles with water spray. Collect contaminated fire fighting water separately. It must not enter the sewage system.

Accidental release measures

· Personal precautions, protective equipment and emergency procedures: Wear protective equipment. Keep unprotected persons away. Particular danger of slipping on leaked/spilled product. Ensure adequate ventilation. Wear protective clothing.
· Environmental precautions: Do not allow to enter sewers/ surface or ground water.
· Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste. Dispose of the material collected according to regulations.

Handling and storage

HANDLING
· Precautions for safe handling: Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols.
· Information about fire and explosion protection: No special measures required.

STORAGE
· Requirements to be met by storerooms and receptacles: Store only in the original receptacle.
· Information about storage in one common storage facility: Store away from oxidizing agents. Do not store together with alkalis (caustic solutions).
· Further information about storage conditions: Store in cool, dry conditions in well sealed receptacles. Protect from heat and direct sunlight. Protect from exposure to the light. Protect from humidity and water. Store receptacle in a well ventilated area.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
not classified
Shippingopen allclose all
Labels:
not classified
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
not classified
Shippingopen allclose all
Labels:
not classified
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
not classified
Shipping information
Proper shipping name and description:
not classified
Chemical name:
not classified
Labels:
not classified
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
not classified
Shipping information
Proper shipping name and description:
not classified
Chemical name:
not classified
Labels:
not classified
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal protective equipment:
· General protective and hygienic measures: Avoid contact with the eyes and skin. Wash hands before breaks and at the end of work. Take off contaminated clothing and wash before reuse. Do no eat, drink or smoke when using this product. Keep away from foodstuffs, beverages and feed. The usual precautionary measures are to be adhered to when handling chemicals.
· Respiratory protection: Not necessary if room is well-ventilated.
· Protection of hands: Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
· Material of gloves: Butyl rubber, BR; Nitrile rubber, NBR;
· Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
· Eye protection: Tightly sealed goggles.
· Body protection: Protective work clothing

Stability and reactivity

· Thermal decomposition / conditions to be avoided: To avoid thermal decomposition do not overheat. No decomposition if used and stored according to specifications.
· Possibility of hazardous reactions: reacts with strong alkali.
· Incompatible materials: Alkaline materials (bases)
· Hazardous decomposition products: Carbon monoxide, Allylalcohol, Acrolein

Disposal considerations

· Waste treatment methods: recommendation: Must be specially treated adhering to official regulations.
· Uncleaned packaging: recommendation: Disposal must be made according to official regulations.