Registration Dossier

Administrative data

First-aid measures

General advice: Take off immediately all contaminated clothing (including shoes).
Inhalation: Dust inhalation: Blow nose.Move to fresh air. If symptoms persist, call a physician.
Skin contact: Wash off immediately with soap and plenty of water. If skin irritation persists, call a physician.
Eye contact: Dusts : Wash well-open eyes immediately, abundantly and thoroughly with water. Remove particles remaining under the eyelids. If irritation persists, consult an ophthalmologist.
Ingestion: In case of problems : Consult a doctor.
Protection of first-aiders: Protective clothing and impermeable gloves. Dusts : In case of insufficient ventilation, wear suitable respiratory equipment.

Fire-fighting measures

5.1.Extinguishing media
Suitable extinguishing media: Foam, carbon dioxide, dry powder extinguishers.
Unsuitable extinguishing media: High volume water jet

5.2. Special hazards arising from the substance or mixture:
In the event of fire and/or explosion do not breathe fumes.
Formation of toxic products through combustion:, Carbon oxides, nitrogen oxides
Dust may form explosive mixture in air.

5.3. Advice for firefighters:
Specific methods: Keep containers and surroundings cool with water spray. Ensure a system for the rapid emptying of containers. In case of fire nearby, remove the bags.
Special protective actions for fire-fighters: Wear self-contained breathing apparatus and protective suit.

Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures:
Evacuate personnel to safe areas. Prohibit all sources of sparks and ignition - Do not smoke. Wear a dust mask and safety glasses/goggles if
necessary. In case of insufficient ventilation, wear suitable respiratory equipment Prohibit contact with skin and eyes and inhalation of dust.

6.2. Environmental precautions:
Should not be released into the environment. Do not let product enter drains.

6.3. Methods and materials for containment and cleaning up:
Recovery: Shovel into suitable container for disposal. Sweep up to prevent slipping hazard. No sparking tools should be used. Rinse with water. Recover waste water for processing later.
Elimination: Destroy the product by incineration (in accordance with local and national regulations).

Handling and storage

7.1. Precautions for safe handling:
Technical measures/Precautions: Storage and handling precautions applicable to products: Solid. DUST FORMING, forming EXPLOSIVE mixtures with air(In the presence of an ignition source). Provide appropriate exhaust ventilation at machinery and at places where dust can be generated. Provide showers, eye-baths Provide water supplies near the point of use. Provide electrical earthing of equipment.

Safe handling advice: Avoid dust accumulation in enclosed space. Avoid creating dust. In case of dust formation, wear a dust mask. Avoid charging as a dust shower – risk of product flammability. Prohibit all sources of sparks and ignition - Do not smoke. Take precautionary measures against static discharges. In case of insufficient ventilation, wear suitable respiratory equipment

Hygiene measures: When using do not eat, drink or smoke. Avoid breathing dust. Prohibit contact with skin and eyes. Wash hands after handling. Remove contaminated clothing and protective equipment before entering eating areas.

7.2. Conditions for safe storage, including any incompatibilities:
Keep tightly closed in a dry and cool place. Store in original container. Store away from heat and ignition sources. Provide electrical earthing of equipment and electrical equipment usable in explosive atmospheres. The floor of the storage area should be impermeable and contained within a bund.
Incompatible products: Strong oxidizing agents
Packaging material: Recommended: Metals, To be avoided: Plastic materials

7.3. Specific end use(s): None.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

8.1. Control parameters:
Exposure Limit Values Not relevant
Derived No Effect Level (DNEL): No data available.
Predicted No Effect Concentration: No data available.

8.2. Exposure controls:
General protective measures: Provide appropriate exhaust ventilation at machinery and at places where dust can be generated.
Personal protective equipment:
Respiratory protection: Respirator must be worn if exposed to dust. Recommended Filter type: P2 In the case of hazardous fumes, wear self contained breathing apparatus.
Hand protection: Protective gloves
Eye/face protection: Safety glasses with side-shields
Skin and body protection: Appropriate protective clothing. Safety shoes

Environmental exposure controls: Do not release into the environment.

Stability and reactivity

10.1. & 10.2. Reactivity & Chemical stability: The product is stable under normal handling and storage conditions.

10.3. Possibility of hazardous reactions: In the presence of an ignition source: Dust may form explosive mixture in air.

10.4. Conditions to avoid: Heat, flames and sparks. Avoid moisture.

10.5. Incompatible materials to avoid: Strong oxidizing agents

10.6. Hazardous decomposition products:
Thermal decomposition: Decomposition temperature: > 310 °C
Thermal decomposition can lead to release of irritating gases and vapours.
Formation of toxic products through combustion:, Carbon oxides, Nitrogen oxides

Disposal considerations

13.1. Waste treatment:
Disposal of product: The product should not be allowed to enter drains, water courses or the soil. Dispose of contents/container to an approved waste disposal plant. In accordance with local and national regulations.
Disposal of packaging: Do not release into the environment. Recycle or incinerate at an approved waste disposal site. In accordance with local and national regulations.