Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Flammability

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
flammable solids
Type of information:
other: read across
Adequacy of study:
supporting study
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to guideline
Guideline:
EU Method A.10 (Flammability (Solids))
Principles of method if other than guideline:
The test was performed according to the Dir. 92/69/EEC (OJ L383A) protocol.
GLP compliance:
no
Test procedure:
burning rate test: preliminary screening test
Remarks on result:
substance does not ignite and propagate combustion either by burning with flame or smouldering along 200 mm of the powder train within the 2 minutes test period

The test resulted to be negative, thus the substance can be considered as non flammable.

Interpretation of results:
other: Non flammable
Conclusions:
Non flammable.
Executive summary:

The test was performed according to internationally accepted testing method A.10.

The test resulted to be negative, thus the substance can be considered as non flammable.

Conclusion

Non flammable.

Description of key information

non flammable

Key value for chemical safety assessment

Flammability:
non flammable

Additional information

EU method A.10.

Justification for classification or non-classification

According to the CLP Regulation (EC 1272/2008), 2.7 section, flammable solids, powdered, granular or pasty substances or mixtures shall be classified as readily combustible solids when the time of burning of one or more of the test runs, performed in accordance with the test method described in Part III, sub-section 33.2.1, of the UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria, is less than 45 seconds or the rate of burning is more than 2.2 mm/s.

The substance did not propagate burning of a 200 mm length of the strip in less than four minutes, therefore it is expected to be non flammable.

In conclusion, according to the CLP Regulation (EC 1272/2008) Direct Black 062 does not meet the criteria to be classified as flammable.