Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures
If adverse health effects develop seek medical attention.

If inhaled:
not relevant.

On skin contact:
After contact with skin, wash immediately with plenty of water.

On contact with eyes:
In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. Seek medical attention if necessary.

On ingestion:
Rinse mouth and then drink 200-300 ml of water.
Most important symptoms and effects, both acute and delayed
Symptoms: No significant symptoms are expected due to the non-classification of the product.

Hazards: No hazard is expected under intended use and appropriate handling.


Indication of any immediate medical attention and special treatment needed
Treatment: Treat symptomatically.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media:
water spray, dry powder, foam

Unsuitable extinguishing media for safety reasons:
carbon dioxide

Special hazards arising from the substance or mixture
harmful vapours
Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.

Advice for fire-fighters
Special protective equipment:
Wear a self-contained breathing apparatus.

Further information:
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Use personal protective clothing.

Environmental precautions
Do not discharge into drains/surface waters/groundwater.

Methods and material for containment and cleaning up
For small amounts: Pick up with suitable appliance and dispose of.
For large amounts: Pick up with suitable appliance and dispose of.
Dispose of absorbed material in accordance with regulations.

Reference to other sections
Information regarding exposure controls/personal protection and disposal considerations can be found in section 8 and 13.

Handling and storage

Precautions for safe handling
Handle in accordance with good industrial hygiene and safety practice.

Protection against fire and explosion:
Take precautionary measures against static discharges. Avoid all sources of ignition: heat, sparks, open flame.

Conditions for safe storage, including any incompatibilities

Suitable materials for containers: High density polyethylene (HDPE), Stainless steel 1.4571
Further information on storage conditions: Keep container tightly closed and dry; store in a cool place.

Specific end use(s)
For the relevant identified use(s) listed in Section 1 the advice mentioned in this section 7 is to be observed.

Transport information

Land transport (UN RTDG/ADR/RID)

Shippingopen allclose all
Labels:
Not classified as a dangerous good under transport regulations
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

Shippingopen allclose all
Labels:
Not classified as a dangerous good under transport regulations
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Labels:
Not classified as a dangerous good under transport regulations
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Labels:
Not classified as a dangerous good under transport regulations
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters

Components with occupational exposure limits


112-80-1: Oleic acid

Exposure controls
Personal protective equipment
Respiratory protection:
Breathing protection if dusts are formed.

Hand protection:
Suitable are protective gloves with the following specification. The recommendation is valid for laboratory conditions, specific workplace conditions must be taken into consideration separately.
Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374):
nitrile rubber (NBR) - 0.2 mm coating thickness

Eye protection:
Safety glasses with side-shields (frame goggles) (e.g. EN 166)

Body protection:
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).

General safety and hygiene measures
Handle in accordance with good industrial hygiene and safety practice. No eating, drinking, smoking or tobacco use at the place of work. Handle in accordance with good industrial hygiene and safety practice.

Stability and reactivity

Reactivity
No hazardous reactions if stored and handled as prescribed/indicated.


Chemical stability
The product is stable if stored and handled as prescribed/indicated.

Possibility of hazardous reactions
No hazardous reactions when stored and handled according to instructions.


Conditions to avoid
See MSDS section 7 - Handling and storage.

Incompatible materials

Substances to avoid:
No substances known that should be avoided.

Hazardous decomposition products

Hazardous decomposition products:
No hazardous decomposition products if stored and handled as prescribed/indicated.

Disposal considerations

Waste treatment methods

Must be disposed of or incinerated in accordance with local regulations.


Contaminated packaging:
Uncontaminated packaging can be re-used.
Packs that cannot be cleaned should be disposed of in the same manner as the contents.